Control-M/Server Messages

The following Control-M/Server messages are listed according to their ID number. The messages range from warning messages to error messages and contain an explanation and corrective action (where possible).

• 4900 WORKLOAD workloadName UPLOADED FROM CTM|EM
• 4901 WORKLOAD workloadName DELETED FROM CTM|EM
• 4902 SUCCESSFULLY SAVED WORKLOAD(S) WITH TYPE type
• 4903 WORKLOAD workloadName HAS BECOME state
• 4904 WORKLOADS ORDER LIST WAS UPLOADED FROM THE CTM\EM
• 4905 MAXIMUM JOBS LIMIT FOR WORKLOAD workloadName HAS BEEN CHANGED TO number
• 4906 MAXIMUM RESOURCE LIMIT FOR WORKLOAD workloadName HAS BEEN CHANGED TO number
• 4907 THE HOST GROUP HAS BEEN CHANGED TO hostGroup DUE TO MAPPING POLICY OF WORKLOAD workloadName
• 4908 THE HOST GROUP HAS BEEN RESTORED TO DEFINITION
• 4909 JOB IS NOW A MEMBER OF THE FOLLOWING WORKLOADS listOfWorkloadsNames
• 4913 JOB IS NOT ASSOCIATED WITH A WORKLOAD
• 4914 ACCOUNT , APPLTYPE , AGENT is Disabled|Unavailable. [Message from Agent follows]
• 4920 MAXIMUM JOBS LIMIT FOR HOST hostname HAS BEEN CHANGED TO number
• 4921 MAXIMUM CPU LEVEL FOR HOST hostname HAS BEEN CHANGED TO number
• 4922 DIFFERENT CPU USAGE HAS BEEN REPORTED FROM HOST hostName AS newCpuUsage
• 5003 MAXRETRY REACHED FOR processID. SUPERVISOR IS SHUTTING DOWN
• 5006 Control-M LOG CLEANUP ENDED. DAYS= days
• 5009 RESET CYCLIC FLAG TO NO
• 5011 Control-M LOG CLEANUP STARTED
• 5014 Control-M AGENTS CLEANUP STARTED
• 5015 Control-M AGENTS CLEANUP ENDED. DAYS= days
• 5016 Control-M AGENT agent WAS NOT CLEANED\
• 5017 Control-M AGENT(S) CLEANUP FAILED
• 5018 Control-M AGENT agent CLEANED SUCCESSFULLY. DAYS= days
• 5019 STATISTICS INFORMATION CLEANUP STARTED.
• 5030 ACTIVE JOBS FILE DOWNLOADED TO Control-M/EM {STARTED | ENDED}
• 5034 STATISTICS INFORMATION CLEANUP ENDED. MODE= purgeMode. LEAVE= purgeLimit
• 5035 STATISTICS INFORMATION CLEANUP FAILED
• 5040 NEW DAY PROCEDURE STARTED
• 5041 ACTIVE JOBS FILE CLEANUP ENDED
• 5043 QUANTITATIVE RESOURCE INTEGRITY ERROR. resourceName n1 n2
• 5044 Control RESOURCE resourceName INTEGRITY ERROR. USED= n1, CTLTAB= n2
• 5045 Control RESOURCE resourceName INTEGRITY ERROR. MODE EXCLUSIVE, USED n
• 5047 ALLOW SUBMISSION FOR PARAMETER EXCEEDED
• 5048 NEW DAY PROCEDURE TIME HAS ARRIVED
• 5060 LAST RUN DATE OF USER userDaily NONEXISTENT. STATUS = status
• 5061 USER DAILY userDaily STARTED
• 5062 USER DAILY userDaily ENDED
• 5063 CALENDAR calName, NOT FOUND OR NOT COMPLETE
• 5064 USER DAILY userDaily STOPPED - DATE PROBLEM. LAST lastDate, NEXT nextDate
• 5065 ORDERED %s: jobNumber; DAILY userDaily, ODATE odate
• 5066 DAILY userDaily FAILED TO ORDER JOBNAME jobName
• 5067 ONE OR MORE JOBS IN DAILY userDaily WERE NOT ORDERED
• 5069 JOB %s WILL NOT BE ORDERED DURING UPCOMING SYSTEM DAILY - %s
• 5070 ONE OR MORE JOBS WILL NOT BE ORDERED DURING UPCOMING SYSTEM DAILY
• 5080 FAILED TO SUBMIT JOB FileName. reason
• 5100 ENDED AT time. OSCOMPSTAT rc. RUNCNT runCounter
• 5101 STARTED AT startRun ON hostID
• 5102 DISAPPEARED AT time. RUNCNT runCounter
• 5105 SUBMITTED TO hostID
• 5106 DISAPPEARED AT dateTime. RUNCNT count. node name IS status
• 5110 LIBMEMSYM FILE pathName NOT FOUND
• 5120 %s STATE CHANGED TO %s
• 5132 STATUS SET TO jobStatus AS A RESULT OF DO {OK | NOTOK | RERUN}
• 5133 ENDED OK
• 5134 ENDED NOTOK
• 5136 JOB STATE CHANGED TO RETRY - SUBMIT
• 5164 DUMMY. STATUS CHANGED TO OK
• 5166 INVALID TIME ZONE timeZone. STATUS CHANGED TO FAILED TO SUBMIT
• 5169 Message from Agent:
• 5199 CONDITION 'condName' 'condDate' ALREADY EXISTS
• 5201 SHOUT TO destination PERFORMED
• 5202 SHOUT TO destination FAILED
• 5203 Control RESOURCE resourceName RESERVED
• 5204 Control RESOURCE resourceName ALLOCATED. MODE: {S | E}
• 5206 Control RESOURCES RELEASED
• 5207 QUANTITATIVE RESOURCE resourceName QUANTITY resourceQuantity RESERVED
• 5208 QUANTITATIVE RESOURCE resourceName QUANTITY resourceQuantity ALLOCATED
• 5209 CONDITION condName condDate ADDED
• 5210 CONDITION condName condDate DELETED
• 5211 %s JOB FAILURE. JOB %s, FOLDER %s
• 5212 JOB %s, FOLDER %s %s
• 5214 QUANTITATIVE RESOURCES RELEASED
• 5215 ALL RERUNS HAVE BEEN PERFORMED. MAXRERUN = number
• 5217 folder '%s', job name '%s' not found
• 5219 CYCLIC ATTRIBUTE REMOVED DUE TO DOSTOPCYCLIC
• 5220 STATUS OF AGENT PLATFORM HostID CHANGED TO AVAILABLE
• 5222 STATUS OF AGENT PLATFORM nodeID CHANGED TO UNAVAILABLE
• 5223 STATUS OF AGENT PLATFORM hostID CHANGED TO DISABLED
• 5225 STATUS OF ACCOUNT , APPLTYPE , AGENT CHANGED TO [AVAILABLE|DISABLED|UNAVAILABLE. Message from Agent follows]
• 5226 :
• 5228 SHOUT TO STILL RUNNING. [JOB|SMART table|Sub table] PROCESSING CONTINUES.
• 5231 CYCLIC ATTRIBUTE OF THIS JOB CHANGED DUE TO STATUS=NOTOK
• 5232 Warning: Cyclic job getting close to maximum allowed runs.
• 5233 Error: cyclic job run too many times and will not run any more
• 5250 ACCESS TO FOLDER %s IS NOT ALLOWED TO USER %s
• 5251 THIS RUN_AS USER IS NOT AUTHORIZED TO EXECUTE THE JOB SCRIPT
• 5252 USER %s NOT AUTHORIZED FOR RUN_AS USER %s
• 5301 SERVER INTERNAL ERROR TYPE type
• 5302 INCOMPATIBLE GATEWAY VER. DATA CENTER VER. CTMServerVersion. W.S. VER. gatewayVersion
• 5304 CANNOT {DELETE | FREE} <%s> orderNumber - <%s> NOT HELD
• 5305 ACTIVE JOBS FILE IS LOCKED, TRY AGAIN LATER
• 5306 CANNOT action JOB orderNumber - JOB DOES NOT EXIST
• 5309 CANNOT HOLD <%s> orderNumber - <%s> ALREADY HELD
• 5310 JOB orderNumber IS NOT WAITING FOR CONFIRMATION
• 5311 ERROR PROCESSING XML REQUEST. xmlMessage
• 5312 GATEWAY OLDER THAN 613 CANNOT CONNECT TO DATA CENTER 613 OR ABOVE
• 5315 QUANTITATIVE RESOURCE resourceName IN USE - CANNOT DELETE
• 5316 QUANTITATIVE RESOURCE resourceName ALREADY EXISTS
• 5317 QUANTITATIVE RESOURCE resourceName DOES NOT EXIST
• 5318 VALUE OF CHANGE IS OUT OF RANGE
• 5319 OUTPUT DOES NOT EXIST FOR THIS JOB
• 5321 STATISTICS DO NOT EXIST FOR THIS FILE/MEMBER
• 5323 SECURITY PROTECTION VIOLATION
• 5327 CANNOT POSTPROCESS JOB. JOB HELD BY SYSTEM
• 5328 JOB orderNumber IS NOT IN EXECUTION STATE
• 5330 AGENT hostID/group IS UNAVAILABLE. REQUEST action FAILED
• 5351 QUANTITATIVE RESOURCE resourceName QUANTITY resourceQuantity DEFINED
• 5352 QUANTITATIVE RESOURCE resourceName DELETED
• 5353 QUANTITATIVE RESOURCE resourceName QUANTITY INCREASED BY resourceQuantity
• 5354 QUANTITATIVE RESOURCE resourceName QUANTITY DECREASED BY resourceQuantity
• 5355 QUANTITATIVE RESOURCE resourceName QUANTITY resourceQuantity RELEASED
• 5358 FILE NOT FOUND
• 5359 DIRECTORY NOT FOUND
• 5360 SECURITY VIOLATION
• 5361 THE SELECTED JOB/SMART FOLDER CANNOT BE DELETED DUE TO ITS CURRENT STATE.
• 5362 QR:'resourceName', QRTOTAL: maxQuantity {decreased | increased} (resourceQuantity)
• 5363 QR:'resourceName', QRTOTAL: maxQuantity defined
• 5364 QR:'resourceName' deleted
• 5366 is rejected.
• 5367 ACCOUNT, APPLTYPE , AGENT IS UNAVAILABLE REQUEST FAILED The user request is not executed.
• 5401 HELD BY USER userName
• 5402 FREED BY USER userName
• 5403 DELETED BY USER userName
• 5404 RERUN BY USER userName
• 5405 CONFIRMED BY USER userName
• 5407 CREATED BY USER userName
• 5408 UNDELETED BY USER userName
• 5409 JOB KILLED BY USER userName
• 5410 JOB SET TO OK
• 5411 SET TO OK REQUEST SUBMITTED BY USER userName
• 5412 Bypass set ON|OFF by user
• 5413 ALL BYPASS OPTIONS ARE RESET TO OFF
• 5500 SERVICE NOT ALLOWED NOW - reason
• 5506 OPERATION NOT SUPPORTED BY AGENT orderNumber
• 5507 AGENT ENCOUNTERED ERROR { orderNumber| Write to File Failed }
• 5508 MAXIMUM CONCURRENT SESSIONS LIMITATION REACHED
• 5520 Perform rollback in function: functionName
• 5522 ERROR: RESOLVED VALUE FOR paramName IS LONGER THAN number CHARACTERS
• 5525 CTMJSA STARTED. MODE={MEMNAME | JOBNAME}
• 5525 CTMJSA STARTED. MODE={MEMNAME | JOBNAME}
• 5700 Folder folderName, Jobname jobName
• 5701 %s %s' ordered, file_name = %s', orderno= %s
• 5702 FileName not ordered
• 5703 FOLDER %s DOES NOT EXIST
• 5704 WARNING: CALENDAR or Rule-based calendar UP TO DATE. REQUEST REJECTED
• 5705 [FOLDER|CALENDAR|Rule-Based Calendar] [folderName|CalendarName|RuleBasedCalendarName] PREVIOUSLY MODIFIED BY Control-M. REQUEST REJECTED
• 5706 Sub folder SubFolderName not ordered (Reason)
• 5707 DOVARIABLE '%s'='%s' performed
• 5708 order operation rolled back. Waiting for the end of New Day...
• 5710 %s: No matching Sub Folder definitions found for folder path %s
• 5711 SMART folder 'SmartFolderName' not ordered (Reason)
• 5720 INTO-FOLDER-ORD request is ignored for the regular job %s
• 5722 WARNING: FOLDER %s IS LOCKED. REQUEST REJECTED
• 5723 WARNING: FOLDER %s UP TO DATE. REQUEST REJECTED
• 5740 User '%s' not allowed to order from folder '%s'
• 5741 User %s' not allowed to FORCE for Run_As user %s'
• 5742 User %s' not allowed to ORDER for Run_As user %s'
• 5743 Security check failed
• 5744 Row number rowNumber does not match the requested job jobName. Can't force into a new Group.
• 5745 Folder '%s' job name '%s' not found
• 5746 The SMART Folder, Sub-folder, SMART Folder job, or Sub-folder job failed to be ordered
• 5747 The ordered SMART or Sub folder does not exist. %s
• 5748 Job No %d does not belong to the SMART folder with orderno %d
• 5749 The SMART Folder l Sub folder already includes an instance of the job
• 5750 No RBC was found or all the SMART folder's RBC failed
• 5751 Error in job's schedule parameters
• 5753 Error copying jobdef to AJF
• 5754 CONDITION condName WITH ORDER DATE condDate DOES NOT EXIST
• 5755 CONDITION condName WITH ORDER DATE condDate ALREADY EXISTS
• 5756 INVALID DATE FOR CONDITION condName condDate
• 5757 ORDER FORCE FAILED DATE= orderDate
• 5758 FOLDER %s IS NOT UP TO DATE
• 5759 Jobname jobName not ordered. Invalid Time Zone.
• 5760 SYNC REQUEST TIMEDOUT
• 5761 SESSION CLOSED BY CO
• 5762 FAILED TO { ADD | DEL} COND: condName, ODAT: condDate
• 5763 FAILED TO DELETE CONDITION: condName DATEREF: condDate
• 5764 Failed to perform DOFORCE. folder: %s, job: %s
• 5765 Sub folder %s job cannot be ordered
• 5766 Cannot order when wait for ODate is set
• 5775 Initialize Sub folder %s job numbers retrieval failed
• 5776 Retrieve next job details of Sub folder %s failed
• 5777 < functionName>: Failed to retrieve definition of job number < jobNumber>
• 5778 Force Sub folder %s alone is not permitted
• 5801 Failed to delete records from folder FolderName with ORDERNO OrderNumber.
• 5803 Update folder FolderName FAILED.
• 5807 SUBAPPLICATION and FOLDER should be the same for SMART folder entity.
• 5808 SUBAPPLICATION and FOLDER should be specified.
• 5811 FAILED to allocate isn.
• 5812 No hosts found in HOSTGRP %s
• 5814 FAILED to setup the application type for HOSTGRP %s.
• 5815 Invalid ODATE date.
• 5816 OUTPUT FILE EXCEEDED LIMIT SIZE (CAN BE VIEWED FROM FILE SYSTEM)
• 5817 Illegal specified folder path FolderName.
• 5821 SMART folder name FolderName contains illegal character /
• 5830 Pre new day ordering for (SMART folder) entity (jobno)
• 5831 Pre new day ordered (SMART folder\Sub folder\JOB):jobno ; ODATE (odate)
• 5832 Pre new day ordering reset due to %s
• 5902 Job: jobNumber USER EXIT102 failed. task type= taskType
• 5903 User Daily SYSTEM USER EXIT103 failed. old_odat= date
• 5904 User Daily SYSTEM: USER EXIT CTMUE104 failed. old_odat= date
• 5905 User Daily userDailyName: USER EXIT CTMUE105 failed. old_odat= date
• 5906 User Daily userDailyName: USER EXIT CTMUE106 failed. old_odat= date
• 5922 Illegal host type Host Type encountered for host HostName
• 5935 BMC recommends that you enable archiving on your database.
• 5936 BMC recommends that you periodically perform hot backup to your database.
• 5937 Hot backup has not been done for over %d days.
• 5950 Forced from Control-M %s
• 5951 Forced by ordereid %s run-no %s
• 6000 functionName: Stored Procedure failed (procName)
• 6002 User name does not have environment definition for varDescription (varName)
• 6003 functionName: Failed to update database statistics. rc= rc
• 6004 functionName: Failed to create cache table for process parameters
• 6005 functionName: Failed to create cache table record for process parameters
• 6006 functionName: Failed to create a duplicate cache table record for process parameters
• 6007 functionName: Failed to create cache table for variable names
• 6008 functionName: Failed to create cache table for variable values
• 6009 functionName: Failed to expand cache table for variables for order number orderNumber. Variable Name varName, Variable Expression varExpression
• 6010 functionName: Failed to expand cache table for group and local variables
• 6011 functionName: Failed to retrieve global variables from the database
• 6012 functionName: Failed to retrieve {Job | Group} variables from the database for {Job | Group} order number orderNum
• 6013 functionName: Failed to determine variable name level (job, group or global)
• 6014 functionName: Failed to delete global variable name
• 6015 functionName: Failed to delete global variable number
• 6016 functionName: Illegal scheduling plan found in job name name job number number odate date
• 6017 functionName: Group order number number does not exist. Group name can not be ordered into the specified order number
• 6018 functionName: Group entity name was not ordered successfully
• 6019 functionName: Failed to delete in condition(s) of job(s) in group name
• 6020 functionName: Attempt to order daily jobName while upload procedure is active
• 6021 functionName: Failed to read group defName definition. Job jobName is not ordered
• 6022 functionName: Message received from Control-M/EM is not first in sequence
• 6023 functionName: Illegal condition operation opName received from user userName. Condition name is condName
• 6024 functionName: Illegal response responseID received from Control-M/EM for scheduling folder folderName download operation
• 6025 functionName: Illegal response responseID received from Control-M/EM for host group groupName download operation
• 6026 functionName: Illegal response responseID received from Control-M/EM for calendar calName download operation
• 6027 functionName: Failed to handle partitioned folder folderName. Returned status is rc
• 6028 functionName: Terminating process procName, process number procNumber
• 6029 functionName: Failed to update supervisor (SU) process state
• 6030 functionName: Failed to create alert file fileName during handling alert alertName
• 6031 functionName: Failed to release lock lockID (semaphore id) on alert file fileName during handling alert alertName
• 6032 functionName: Failed to copy alert file fileName1 to fileName2
• 6033 functionName: Failed to open alert file fileName, file name fileName return code rc
• 6034 functionName: Failed to release lock lockID after handling alerts file
• 6035 functionName: Failed to release lock (semaphore) id lockID
• 6036 functionName: Failed to initialize process threads environment. Return status rc
• 6037 functionName: Failed to initialize thread environment. Return status rc
• 6038 functionName: Failed to initialize thread database connection. Return status rc
• 6039 functionName: Error occurred while thread termination. Return status rc
• 6040 functionName: Failed to reset Remote Host agent list for Remote Host hostName
• 6041 functionName: Failed to extract Remote Host agent list for Remote Host hostName
• 6042 functionName: Failed to open file fileName for writing
• 6043 functionName: Failed to append Remote host agent name to the remote host agent names list of remote host hostName
• 6044 functionName: Failed to clear remote host agent names list of remote host hostName
• 6045 functionName: Failed to retrieve data from folder folderName explanation
• 6046 functionName: { SSH | WMI } details not found for remote host hostName
• 6047 functionName: Failed to get host name of machine on which Control-M/Server is running.
• 6048 functionName: Failed to fetch next remote host agent name from remote host agent names list of remote host hostName
• 6049 functionName: Failed to clear availability remote host agent names list of remote host hostName
• 6050 Failed to update remote host hostName status
• 6051 Failed to update status details of remote host hostName
• 6052 Failed to read agent agentName status while handling remote host hostName
• 6053 functionName: Agent agentName status file not found while handling remote host hostName
• 6057 functionName: Failed to delete agent name agentName from agent names list of remote host hostName
• 6058 functionName: Host hostID status file not found.
• 6059 functionName: Failed to read host hostID status file. Read status status.
• 6060 functionName: Failed to delete agent agentName from the database.
• 6061 functionName: Failed to initialize select on table CMS_RJX_NAMES while handling agent deletion agentName.
• 6062 functionName: Failed to add a host with hostID to remote hosts list while handling agent agentName deletion.
• 6063 functionName: Failed to update agent agentName details used by remote host hostName while handling agent agentName deletion.
• 6064 functionName: Failed to extract remote host name from remote host names list while handling agent agentName deletion.
• 6065 functionName: Failed to extract parameters from trigger message messageText while handling agent deletion.
• 6066 functionName: Illegal agent type received messageText while handling agent deletion.
• 6067 functionName: Failed to duplicate list listInfo listOrigin
• 6068 Delete local agent is prohibited.
• 6069 Update remote hosts using agent agentName failed.
• 6070 Update remote hosts using agent agentName completed partially.
• 6071 Add a new record to TR host list while handle host hostID failed.
• 6072 Add a new record to TR host-job list while handle host hostID and order number orderNumber failed.
• 6073 Determine different memory remote host agent list and remote host status file agent list failed while handling remote host hostName.
• 6074 Remote host hostName agents list file contains illegal line.
• 6075 Add job with order number orderNumber details to host hostID order number list failed.
• 6076 Failed to clean host hostID order number list. rc= rc.
• 6077 functionName: Remote host hostName map details not found
• 6078 functionName: Failed to get remote host hostName map details.
• 6079 functionName: Illegal node status received status with trigger triggerName.
• 6080 functionName: Illegal node type received type with trigger triggerName.
• 6081 Failed to load fileName file explanation.
• 6082 functionName: Only Mail shouts are allowed for remote hosts. Shout type received shoutType while handling order number orderID.
• 6083 functionName: Failed to get available agent for remote host hostName.
• 6084 Illegal node type type received while handle job with orderno orderNumber runcount count.
• 6101 Utility aborted - User not authorized to execute the utility!
• 6102 Timeout waiting for LG process to change state to Running
• 6103 Selector did not get out of suspension
• 6104 Update user information in security table userName description userGroup nodeID
• 6105 Insert user information into security table userName description userGroup nodeID
• 6106 Update group information in security table groupName description - group- nodeID
• 6107 Insert group information into security table groupName description - group- nodeID
• 6108 Failed to receive confirmation of successful message receiving
• 6109 Failed in database operation while trying to find dependent jobs. Return Code = rc
• 6112 Unable to initialize
• 6114 Failed to get ControlM_USER from the environment
• 6116 Failed to get ControlM environment variable
• 6117 Failed to create temporary file fileName for writing. Error Number= errorNumber, Error Message= errorString
• 6118 Failed to create temporary (fp) file fileName for writing
• 6119 Failed to open file filename for reading
• 6120 Failed to get CTM_DATABASE_TYPE from the environment
• 6121 UnSupported database DBType
• 6122 Failed to get envirVariable from the environment
• 6123 Cannot open directory directoryName
• 6124 Cannot shutdown Control-M/Server...
• 6125 Restarting server...
• 6126 Cannot restart Control-M/Server...
• 6127 Failed to run ctmshout utility
• 6128 Failed to create database objects
• 6129 Failed to insert initial values into database tables
• 6130 Failed to create database partitions tables
• 6131 Failed to update system and communication parameters in database tables
• 6132 Failed to reset several Control-M/Server configuration parameters
• 6133 functionName: Failed to retrieve output from the agent for orderno runcount output size. rc = rc
• 6134 functionName: Failed parsing fileName
• 6135 Invalid tagName request in xmlFile
• 6136 functionName: Failed to retrieve element list for nodeName in the fileName
• 6137 Invalid calendarType
• 6138 functionName: Invalid attributeName of attributeType.
• 6139 functionName: Failed to commit when inserting calendar: calendarName, calendarYear
• 6140 functionName: Failed to insert calendar calendarName, calendarYear into the database.
• 6141 functionName: Failed to retrieve parent node of nodeName in the fileName
• 6142 functionName: CalendarName with year was imported successfully.
• 6143 functionName: Failed to convert arguments to UTF8.
• 6153 functionName: A conflict has occurred between the imported information specified in nodeGroup and applType and the information currently existing in the database.
• 6154 functionName: Failed on input XML file initialization process. Message: messageDetails
• 6155 Error was found during XML file parsing. Error Type: errorType, File Name: fileName, Line: lineNum, Column: columnNum, Message: messageDetails
• 6157 Import tableName has successfully written to the database.
• 6158 functionName: Failed to insert scheduling folder folderName into the database
• 6159 functionName: Request permission denied. Scheduling folder: folderName, Action: permissionType. Skip importing this folder.
• 6160 Scheduling folder folderName already exists in the database and overwrite was not specified. Skip importing this folder.
• 6161 functionName: Failed during XML file parsing. Message: messageDetails
• 6162 functionName: Failed to delete scheduling folder folderName from the database
• 6163 functionName: Failed to delete jobs related to scheduling folder folderName from the database
• 6164 functionName: Failed to delete checksum of scheduling folder folderName from the database
• 6165 functionName: Failed to insert tag tagName of scheduling group groupName into the database
• 6166 functionName: Failed to insert dates of scheduling group tag into the database. Tag: tagName, Scheduling group: folderName, Date: Date.
• 6167 functionName: Failed to insert Job jobName for scheduling folder tableName into the database.
• 6168 functionName: Failed to insert jobProcessingDefinitions for Job jobName for scheduling folder folderName into the database.
• 6169 functionName: Failed on processing componentType componentName - JOB is not defined.
• 6170 functionName: Failed on processing jobName - Scheduling Folder is not defined.
• 6171 functionName: scheduling folder folderName already exists in the database and overwrite was specified. Overwriting this folder.
• 6172 Import failed. Job definition folder folderName partially imported.
• 6174 Import finished successfully.
• 6176 Import failed. No table was imported into the database.
• 6177 Import failed. Not all the job definition tables were imported.
• 6178 Starting import of job definition tables from file: fullPathFileName Overwrite mode: mode
• 6179 End of import of job definition tables.
• 6200 functionName fail to initialize a message list for messageType message to agent nodeID, request will be aborted
• 6201 functionName fail to initialize messageType header message to agent nodeID, request will be aborted
• 6202 functionName fail to append messageType header message to agent nodeID, request will be aborted
• 6203 functionName fail to create messageType message to agent nodeID, request will be aborted
• 6204 functionName received from agent a corrupt message <<<< message>>>>
• 6205 functionName fail to create temporary status file: fileName
• 6206 functionName fail to write temporary status file: fileName
• 6207 functionName fail to close temporary status file: fileName
• 6208 functionName fail to rename temporary status file: fileName1 to status file: fileName2
• 6209 functionName fail to make a message list from a message buffer, request will be aborted
• 6210 functionName fail to get header message, request will be aborted
• 6211 functionName unSupported request code (requestCode) received from agent nodeID
• 6212 functionName received termination request by user
• 6213 functionName unSupported request code (requestCode) received from one of the server processes
• 6214 functionName null logical TCP session pointer, current service is aborted
• 6215 functionName failed to create a new physical protocol communication channel
• 6216 functionName communication error INET protocol type (protocol) is not Supported
• 6217 functionName communication error protocol mode (protocol) is not Supported
• 6218 functionName failed to create a new logical protocol communication channel
• 6219 functionName failed to up-class a physical communication channel to a physical protocol communication channel
• 6220 functionName failed to connect to client (nodeID) at port (portNumber)
• 6221 functionName failed to disconnect session of logical TCP communication channel (channel) of physical session id (sessionID)
• 6222 functionName connected client name (nodeID) is already connected
• 6223 functionName fail to get parameter agent parameter value for client name (nodeID) using default
• 6224 Connected persistent sessions:
• 6225 Disconnected persistent sessions:
• 6226 functionName failed to create a new disconnected session for client name (nodeID)
• 6227 functionName failed to send alerts on event
• 6228 functionName operation (opCode) is not Supported
• 6229 functionName failed on SSL client operation server operation with physical session id (sessionID) sid= code
• 6230 functionName failed to set SSL session option (option) with physical session id (sessionID)
• 6231 functionName failed on SSL server operation client operation with physical session id (sessionID) sid= code
• 6232 functionName process processName will terminate after receiving SIGTERM signal
• 6233 functionName got an invalid SSL profileType profile pointer while SSL protocol is enabled.
• 6234 functionName got a negative value for PORTNUM entry in AGDEFS table
• 6235 NS initialization failed process will be aborted
• 6236 NS service manager failed to start default services, process will be aborted
• 6237 NS agent availability failed to start, process will be aborted
• 6238 functionName failed to open INET listen channel for HOST: host on PORT: port
• 6239 functionName failed to open CTMS listen channel for NAME: IPCCode
• 6240 functionName failed to up-class an abstract channel to a communication channel (pointer)
• 6243 functionName failed to delete host group hostGroup information from table databaseTable, code= rc
• 6244 functionName failed to insert host group hostGroup into table databaseTable, code= rc
• 6300 functionName : Inconsistent Control-M Server to Control-M Agent message list
• 6301 functionName : Control-M Server to Control-M Agent message pointer is not initialized
• 6302 functionName : Control-M Server to Control-M Agent Message buffer is not initialized
• 6303 functionName : Control-M Server to Control-M Agent Messages list is not initialized
• 6304 functionName : The value of 'CPU used' sent by the Control-M Agent is negative : CPU_used
• 6305 functionName : The value of 'elapse time' sent by the Control-M Agent is negative: time
• 6306 functionName : Control-M Server to Control-M Agent message type not found. Message type : messageType.
• 6307 functionName : Control-M Server to Control-M Agent message is empty
• 6308 functionName : Gateway older than 613 cannot connect data center 613 or above
• 6309 functionName : Unknown service ID received from Control-M EM
• 6310 functionName : Database transaction failed to commit. Return code = rc
• 6311 functionName : Database fail to open a new transaction
• 6312 functionName : Failed to clean statistic information. Return code = rc
• 6313 functionName : Database transaction failed to rollback. Return code = rc
• 6314 functionName : Failed to clean CMR_JOBINF table. Return code = rc
• 6315 functionName : Ignore Conditions file exceeded maxEntries entries
• 6316 functionName Failed to delete condition : condName, condDate
• 6317 functionName Fail to allocate memory for AGSTAT information
• 6319 functionName Agent nodeID newday cleanup failed. Return code = rc
• 6319 functionName Agent nodeID newday cleanup failed. Return code = rc
• 6320 functionName Fail to fetch next record from AGSTAT table. Return code = rc
• 6321 functionName Failed to translate local date and time information given specific Time Zone
• 6322 functionName Failed to perform new day process for time zone timeZone, odate odate
• 6323 functionName Failed to select jobs from active jobs file where time zone = timeZone
• 6324 functionName Failed to update the job's status on the active jobs list during new day
• 6325 functionName Failed to release control resources during new day process for order number orderNumber
• 6326 functionName Failed to release quantitative resources during new day process for order number orderNumber
• 6327 functionName Failed to delete the file fileName
• 6328 functionName Failed to update variables from Control-M Agent
• 6329 functionName Job have reached timeout for state jobState.
• 6330 functionName Failed to read order number orderNumber from active jobs list. Return code = rc
• 6331 functionName Failed to select post processed jobs from active jobs list
• 6332 functionName A corrupted status file received from Control-M Agent
• 6333 functionName When a corrupted status file received, rename the file fileName1 to fileName2
• 6334 functionName Unable to rename fileName1 to fileName2
• 6335 functionName Failed to initialize connection to database
• 6336 functionName Failed to check link to database server
• 6337 functionName Failed to open CMS_SYSPRM table
• 6338 functionName Failed to clean list
• 6339 functionName Failed to close connection when the process is shutting down
• 6400 functionName: error allocating entity
• 6401 functionName: error in mutex creation: rc
• 6402 functionName: error creating message Q rc
• 6403 functionName: error destroying mutex in cleanup rc
• 6404 functionName: asked to terminate a running thread id= threadID
• 6405 functionName: error destroying mutex rc
• 6406 functionName: error locking mutex rc
• 6407 functionName: error unlocking a mutex rc= rc
• 6408 functionName: error creating threads dynamic array rc= rc
• 6409 functionName: error allocating work Qs array
• 6410 functionName: error duplicating message for thread with index threadIndex rc= rc
• 6411 functionName: error in sending message to Q type queueType thread threadIndex rc= rc
• 6412 functionName: failed to get status of thread with index threadIndex rc= rc
• 6413 functionName: failed to add message to thread message Q rc= rc
• 6414 functionName: thread message id messageID without destination
• 6415 functionName: thread with index threadIndex has kpa problem
• 6416 functionName: error creating thread message with id messageID rc= rc
• 6417 functionName: error in priority Q creation rc= rc
• 6418 functionName: error in signaling condition rc= rc
• 6419 Unable to read CMS_SYSPRM
• 6420 functionName: Failed to initialize threads in main. rc = rc
• 6421 functionName: Catastrophic failure while mainAction
• 6422 functionName: Failure occurs - Threads have not changed their states. State = {SUSPEND | RUN}
• 6423 functionName: Thread status pointer is not initialized
• 6424 functionName: failed in checking threads state rc= rc
• 6425 functionName: error inserting thread entity to threads array rc= rc
• 6426 functionName: main thread failed to wait for state change rc= rc
• 6427 functionName: error creating threads manager object rc= rc
• 6428 functionName: failed to get kpa value for thread with index threadIndex
• 6429 functionName: Unknown process state state
• 6430 functionName: Failure while trying to send to all threads a change state message. with id state
• 6431 functionName: Error adding thread work queue - array is full
• 6432 functionName: Cannot add thread message to queue - message is corrupt
• 6433 functionName: Failed to pop a message from message queue rc= rc
• 6434 functionName: Failure occurs - Submission and presub threads have not changed their states to SUSPEND. Going out
• 6435 functionName: Failure occurred - Refresh has was not been performed. rc = rc
• 6436 functionName: validity check of hi_load_start value failed
• 6437 functionName: validity check of hi_load_end value failed, setting hi_load_end value to blank.
• 6438 functionName: Failure occurred while trying to clean the message Q of main thread. rc = rc
• 6439 functionName: Failed while trying to send refresh message to the threadName thread
• 6440 functionName: error in sending message to thread work queue with index threadIndex rc= rc
• 6441 Failed to create temporary file name under directory dirName, rc
• 6442 functionName : Failed to serialize remote host, rc
• 6443 functionName: Failed to deserialize remote host, rc
• 6444 functionName : Failed to update AGSTAT file of nodeID, rc
• 6445 functionName: Failed to locate file fileName rc= rc.
• 6500 functionName: Failed while initializing the thread, rc = rc. Going out.
• 6501 functionName: Failed while initializing the thread's prolog, rc = rc
• 6502 functionName: Failed while fetching the thread's message queue, rc = rc
• 6503 functionName: Failed while setting the thread status to status, rc = rc. Going out.
• 6504 functionName: Failed while getting the thread's status, rc = rc. Going out.
• 6505 functionName: A thread has reached an unrecognized status status. Going out.
• 6506 functionName: A thread has received an unrecognized message messageID
• 6507 functionName: Failed while handling a submission of job orderNumber, rc = rc.
• 6508 functionName: Failed while trying to mark a job orderNumber, as failed in submission rc = rc.
• 6509 functionName: Failed while popping job orderNumber, from submission queue, rc = rc.
• 6510 functionName: Failed while fetching a message from submission queue.
• 6511 functionName: Failed while notifying on submission failure, for job orderNumber, rc = rc
• 6512 functionName: A thread has failed to clean its message queue, rc = rc
• 6513 functionName: No destination is found to where a message should be sent, msg = messageData.
• 6514 functionName: Failed while creating dataStructure, rc = rc
• 6515 functionName: Thread manager has failed to create the thread threadName, rc = rc.
• 6516 functionName: Failed to create thread with invalid type type
• 6517 functionName: Process has failed to Initialize its prolog, rc = rc
• 6518 functionName: No job is marked as Fail in submission queue, rc = rc, Going out.
• 6519 functionName: Failure occurred - Release resource failed, for a job orderNumber rc = rc.
• 6520 functionName: Failed while sending condition message to thread thread for cond condition.
• 6521 functionName: Failed while sending control message to thread thread for resource resource.
• 6522 functionName: Failed while trying to send quantitative message to thread thread for resource resource.
• 6523 functionName: Failed while sending order message for job orderNumber, to thread thread.
• 6524 functionName: Failed while sending order but not submit message for job orderNumber, to thread thread.
• 6525 functionName: Failed while sending a change state SUSPEND to submission thread, rc = rc.
• 6526 functionName: Failed while sending a change state RUN to submission thread, rc = rc.
• 6527 functionName: Failed while sending a notification to submission thread, job orderNumber, rc = rc.
• 6528 functionName: Failed while handling a change state message for thread with index index, new status state, rc = rc.
• 6529 functionName: Failed while handling a KPA message for thread with index index, rc = rc.
• 6530 functionName: Failed while sending Do not handle job Message, for job orderNumber, to thread thread, rc = rc.
• 6531 functionName: Failed while sending change status message to a thread with index index, new status status, rc = rc.
• 6532 functionName: Process has reached terminate state. Going out.
• 6533 functionName: Failed while preparing job orderNumber for submission, rc = rc
• 6534 functionName: Failed during job submission, job orderNumber, because of reason.
• 6536 functionName: No allocated resources were found in database, for job orderNumber, although they should be.
• 6537 functionName: Comm. thread has failed to establish IPC, rc = rc. Going out.
• 6538 functionName: Thread manager failed to close, during action, rc = rc.
• 6539 functionName: Message messageID to be sent to an invalid thread number.
• 6540 functionName: Refresh action failed in process process during action
• 6541 functionName: Failed to read from file fileName, rc= rc
• 6600 Job orderNumber is neither a SMART Folder nor a Sub-folder
• 6601 Job jobName does not exist in CMR_IOALOG
• 6602 CS_info_req_view_output: error reading CMR_AJF (Orderno= orderNumber, Runcount= runCounter). Trying CMR_JOBINF
• 6603 CS_info_req_view_output: Orderno orderNumber runcount runCounter does not exist in CMR_JOBINF and CMR_AJF
• 6604 Cannot allocate memory.
• 6605 cs_info_process_xml_request: GM_XML_DOM_Parser_create failed
• 6606 cs_info_process_xml_requests: GM_XML_DOM_tree_walker_create failed
• 6607 cs_irr_printf: printing line is too long
• 6608 ERROR: unknown ZOOM part
• 6609 CS_ZS_update_stmt: unknown ACTION type
• 6610 CM_SRVC_read failed: unable to save triggers.
• 6611 CM_SRVC_read failed: unable to save triggers for later handling.
• 6612 CM_SRVC_read_nowait: unable to save triggers.
• 6613 CM_SRVC_read_ipc: Add failed - unable to save GTW triggers.
• 6614 CM_SRVC_read_ipc: Add failed - unable to save signal triggers.
• 6615 CS_HNDL_user_req_hold: Failed to hold job.
• 6616 functionName: Failed to set to ok job
• 6617 functionName: Failed to free job
• 6618 functionName: Failed to delete job
• 6619 functionName: Failed to undelete job
• 6620 functionName: Failed to confirm job
• 6621 functionName: Failed to rerun job
• 6622 cs_info_why_check_qr: Failed to retrieve Quantitative Resources.
• 6623 CS_info_req_list_output: error reading CMR_IOALOG (Orderno= orderNumber)
• 6624 CS_info_req_list_output: Failed to retrieve the log of Orderno orderNumber
• 6625 CS_info_req_view_output: Orderno orderNumber runcount runCounter does not exist in CMR_JOBINF>
• 6626 CS_info_req_view_output: error reading CMR_JOBINF (Orderno= orderNumber, Runcount= runCounter)
• 6627 CS_info_req_list_output: error reading CMR_AJF (Orderno= orderNumber)
• 6628 CS_info_req_list_output: Orderno orderNumber does not exist in CMR_JOBINF
• 6629 CS_info_req_list_output: error reading CMR_JOBINF (Orderno= orderNumber)
• 6630 CS_info_req_list_output: Failed to read Orderno orderNumber from CMR_AJF
• 6631 unknown user info request type
• 6632 functionName: Invalid XML file. Cannot find HEADER
• 6633 CS_ZS_update_job: Failed to update job
• 6634 CS_user_req: unknown user request type
• 6635 CS_resource_user_req_ctl: unknown operator
• 6636 CS_resource_user_req_qr - Invalid request
• 6637 CS_upload: unknown upload type
• 6638 CS_download: unknown download type
• 6639 CS_download_sch: download confirmation error
• 6640 Folder is currently being used (folderName)
• 6641 CS_download_cal: download confirmation error
• 6642 functionName: Failed to send alert to Control-M/EM
• 6644 cd_db_init: Failed to read table CMS_CMNPRM
• 6645 cm_ipr_msg_put_msg: message to be sent to Control-M/EM is corrupt
• 6646 CM_open_session_FULL_DUPLEX: cm_bca_accept failed
• 6647 CM_open_session_FULL_DUPLEX: Unable to close session sessionName
• 6648 com_jcr_pack_msg: failed to pack job data
• 6649 com_jcr_add_jobdata: Cannot retrieve record from memory list
• 6650 com_dwl_get_taskt: Illegal task type taskType
• 6651 CM_open_session: cm_bca_accept failed
• 6652 cm_rcv: client name gracefully closed the connection
• 6653 com_jcr_add_jobdata: Failed to find job information when performing zoom-and-save
• 6654 com_jvp_get_do_sz: Illegal DO type (DoType)
• 6655 functionName: Failed to decrypt string string code: rc
• 6701 functionName: Failed to initialize Xerces library
• 6702 functionName: DOM exception caught; message: message code: code
• 6703 DOM implementation not Supported
• 6705 functionName: DOM builder creation failed
• 6706 functionName: DOM writer creation failed
• 6709 functionName: XML length is zero
• 6710 functionName: Communication is down
• 6711 functionName: Failed to send message: rc
• 6712 functionName: Header size is too short: (size = size)
• 6713 Error occurred while parsing XML request. Probably XML text does not match schema. Message: messageText Node name: nodeName
• 6714 functionName: DOM document creation failed
• 6720 Security Group 'group' already exists
• 6721 User 'user' already exists
• 6722 Security Group 'group' does not exist
• 6723 User 'user' does not exist
• AP- 24 Update Parameters Module: 5 - Failed to write to file fileName
• 6724 Failed to create Security group, name ='name'
• 6725 Failed to create Security group
• 6726 Failed to create user, name ='user'
• 6727 Failed to create user
• 6728 Failed to delete user, name ='user'
• 6729 Failed to delete user
• 6730 Failed to delete Security group, name ='name'
• 6731 Failed to delete Security group
• 6732 Failed to update user, name ='user'
• 6733 Failed to update user
• 6734 Failed to update Security group, name ='name'
• 6735 Failed to update Security group
• 6736 Failed to update User or Security group (name = 'name') attributes
• 6737 User or Security group (name = 'name') does not exist
• 6738 Database error error
• 6739 Failed to update Table ('table') attributes for User or Security Group (name='name')
• 6740 Failed to update Active(Owner='owner' NodeId='nodeID') attributes for User or Security Group (name='name')
• 6742 Failed to view user or group attributes
• 6744 Control-M/Server works in restricted mode. Request reqName is rejected.
• 6750 Ping to Control-M/Agent failed
• 6751 Update Control-M/Agent nodeid nodeID failed
• 6752 Access Control-M/Agent data for nodeid nodeID failed
• 6753 Delete Control-M/Agent nodeid nodeID status file failed
• 6754 Delete Control-M/Agent nodeid nodeID parameters file failed
• 6755 functionName Activation of ctmgetcm for Agent nodeID failed
• 6756 Failed to read CM information for Control-M/Agent nodeID from the database, rc
• 6757 functionName: Failed to retrieve Control-M/Server version from versions file
• 6758 functionName : Failed to open Control-M/Server versions file fileName
• 6759 functionName Corrupt versions file: invalid value value found for product prodName
• 6760 Control-M/Server cannot generate a full xml response
• 6761 There is no connection to the database
• 6762 Failure to allocate memory for object during activity
• 6763 Could not create action for request reqName
• 6764 Failed to read table CMS_CMNPRM
• 6765 Failed to read table CMS_SYSPRM
• 6766 Failed to retrieve hostName
• 6767 Received Illegal Time Zone
• 6768 Failed to update gateway port
• 6769 Failures while setting debug level
• 6770 functionName Could not translate last update lastUpdateTime to GMT Time Zone
• 6771 Failed to prepare temporary parameters for agent ping for agent nodeID rc
• 6772 Another request is currently being served for Control-M/Agent nodeID. Please try again in a few seconds.
• 6773 Cannot retrieve the list of host groups
• 6778 Update state of node with Discovering state is prohibited.
• 6787 Host Group hostGroup already exist.
• 6788 Failure occurred while checking existence of Host Group hostGroup.
• 6789 Failed to add host group to the database, code: rc.
• 6790 Host Group hostGroup does not exist.
• 6793 Failed to delete host group from database, code: rc
• 6794 Failed to update host group hostGroup in the database (deletion failure), code: rc
• 6795 Failed to update host group hostGroup in the database (insertion failure), code: rc.
• 6801 Remote Host hostName is not defined
• 6802 Remote Host hostName is already defined
• 6803 Remote Host hostName can not be defined because a Control-M/Agent on that host is already connected.
• 6807 Cannot retrieve owner or host for owner 'owner', host 'host'
• 6808 Failed to add owner 'owner' and host 'host'
• 6809 Owner 'owner' is already defined for host 'host'
• 6810 The passphrase key key and owner owner on host host is incorrect
• 6811 Owner 'owner' is not defined for host 'host'
• 6812 Failed to update owner 'owner' and host 'host'
• 6813 Failed to delete owner 'owner' and host 'host'
• 6814 Failed to add owner 'owner' and host 'host' because the key 'key' does not exist in database
• 6815 Cannot retrieve the list of key names
• 6820 Control-M/Server is not authorized
• 6821 Host is inaccessible
• 6822 No remote service on remote host
• 6823 Invalid user or bad password
• 6824 The passphrase for private key and owner on the remote host is incorrect.
• 6825 To run jobs using WMI protocol, the agent must be installed on either Windows XP, Windows 2003 or higher.
• 6826 The Control-M/Agent services should run under the This Account logon option. Currently, it is the Local System Account
• 6827 Server-Agent Protocol version 07 or higher is required to connect to remote hosts.
• 6828 Failed to update Server to Agent port. Port is busy.
• 6829 Credential validations is inapplicable for Control-M/Agent for UNIX/Linux.
• 6830 The "Logon as a batch job" privilege has not been granted to the user.
• 6831 The SeTcbPrivilege (act as part of OS) privilege has not been granted.
• 6832 Undefined user or wrong password
• 6833 Access to CMD.exe is denied.
• 6834 The credential validations are inapplicable for Control-M/Agent for Windows without the Logon User mode.
• 6835 The user cannot be tested because Nodeid nodeID does not exist.
• 6836 The user cannot be tested because failed to determine Nodeid nodeID status, rc= rc.
• 6837 Failed to serialize owner owner credentials.
• 6838 An internal error occured while testing the user.
• 6839 A timeout occurred while waiting for a response from the agent.
• 6841 The key does not exist.
• 6842 Failure to find key details.
• 6843 The Control-M/Agent must have protocol version 08 or higher for test user functionality.
• 6850 The Configuration Agent plugin configuration file is corrupt: extendedMessage.
• 6851 Failed to create temporary file names code: rc.
• 6852 Failed to update temporary file with standard input content code: rc.
• 6853 Failed to activate plugin code: rc.
• 6854 The output size exceeds the limit (outputStringSize bytes).
• 6855 Operation timed out (timeout seconds).
• 6893 Failed to test Remote Host hostName
• 6894 Failed to ping Remote Host hostName
• 6896 Failed to delete Remote Host hostName, rc
• 6897 Failed to update Remote Host hostName, rc
• 6898 Failed to get Remote Host hostName details, rc
• 6899 Failed to add Remote Host hostName, rc
• 6900 Cannot update CMR_UDLAST for Daily userDaily
• 6901 functionName: Error while creating dwl
• 6902 functionName: Error while creating dwq
• 6903 functionName: Error while creating dwc
• 6904 functionName: Error while creating dwe
• 6905 functionName: Error while creating alr
• 6906 functionName: Failed to count how many jobs are in scheduling folder FolderName. Skip folder
• 6907 functionName: Job not found in list
• 6908 functionName: The number of obsolete jobs is greater than the maximum allowed (maxNumber)
• 6909 functionName: Failed to close file FileName
• 6910 functionName: Failed to delete the obsolete jobs from scheduling folder FolderName
• 6911 functionName: Failed to delete obsolete scheduling folder FolderName [(SpecificFailure)]
• 6912 functionName: Obsolete scheduling folder FolderName deleted successfully
• 6913 functionName: Failed to delete obsolete jobNo JobNumber (jobname=JobName)
• 6914 functionName: Failed to update the checksum of scheduling folder FolderName
• 6915 functionName: NumOfJobs obsolete jobs from scheduling folder FolderName deleted successfully
• 6916 functionName: Failed to check for obsolete criteria in all the tags of all the groups
• 6917 functionName: Failed to check for obsolete criteria in all the tags of all the jobs
• 6918 functionName: Failed to check for obsolete criteria in all the jobs
• 6919 functionName: Failed to write report file FileName
• 6920 functionName: Failed to delete all obsolete tables and jobs
• 6921 functionName: Retrieving obsolete definitions from Control-M/Server database using date criteria: ObsoleteDate
• 6922 functionName: Found NumOfTables tables that contain obsolete jobs
• 6923 functionName: Generate report file FileName
• 6924 functionName: delete folder FolderName *
• 6925 functionName: delete job TableName JobNumber MemName JobName
• 6926 functionName: Start to delete obsolete definitions from Control-M/Server database ...
• 6927 functionName: User is not permitted to [update|delete] folder FolderName. Skip folder
• 6940 < functionName>: Error in < subFolder or subFolderJob> < subFolderName or jobName> schedule parameters
• 6941 < functionName>: Failed to add order number < OrderNumber> of Sub-folder < SubFolderName> to Sub-folders list
• 6942 < functionName>:Failed to retrieve ADJUST_COND for < FolderName or subFolderName>
• 6943 < functionName>: Failed to count how many Sub-folders are in SMART Folder < FolderName>
• 6944 < functionName>: Failed to retrieve ancestor order numbers of Sub-folders and SMART Folder for order number < orderNumber>
• 6945 < functionName>: Failed to add order number < orderNumber> to order numbers list
• 6946 < ActionDescription> is not supported for Sub-folders
• AP- 1 Initialize Module: 1 - This utility must be executed by Windows Administrator
• AP- 2 Initialize DB Module: 1 - Failed to initialize database. return code = rc
• AP- 4 Connect DB Module: 1 - Failed to connect to the Database
• AP- 4 Connect DB Module: 23 - Failed to set database login parameter parameter = parameterName. return code = rc
• AP- 10 Execute Script Module: 4 - Failed to open output tmp file
• AP- 5 Save Parameters Module: 5 - Failed to write to file fileName
• AP- 5 Save Parameters Module: 9 - Failed to append parameter parameterName in the DBUtils file. Action in the database passed successfully.
• AP- 6 Execute Stored Procedure Module: 6 - SP storedProcedure - Failed to fetch column columnName from tableName. return code= rc
• AP- 6 Execute Stored Procedure Module: 7 - SP storedProcedure - Failed to fetch from dbu_monitor_table. return code= rc
• AP- 6 Execute Stored Procedure Module: 8 - SP storedProcedure - Failed to perform select from dbu_monitor_table. return code= rc
• AP- 7 Permission Module: 2 - This utility is not supported
• AP- 9 Get Environment Variable Module: 25 - Failed to retrieve process path. return code=rc
• AP- 10 Execute Script Module: 9 - Failed to invoke command= command. return code= rc
• AP- 11 Validation of Input Parameters Module: 12 - Directory directoryName is not empty
• AP- 11 Validation of Input Parameters Module: 19 - Parameter parameterName is not valid. Full file path is required
• AP- 11 Validation of Input Parameters Module: 9 - Failed to check directory directoryName. return code= rc
• AP- 12 Input Params Module: 10 - Failed to allocate memory
• AP- 12 Input Params Module: 11 - Parameter parameterName is mandatory
• AP- 12 Input Params Module: 13 - Incorrect value for parameter parameterName. Valid values: values
• AP- 12 Input Params Module: 16 - Directory directoryName does not exist
• AP- 12 Input Params Module: 20 - Missing value for parameter parameterName
• AP- 12 Input Params Module: 21 - The value of parameter parameterName exceeds permitted length
• AP- 12 Input Params Module: 22 - Incorrect attribute attribute
• AP- 13 Read DB Utils Parameters Module: 22 - Missing value for parameter parameterName
• AP- 13 Read DB Utils Parameters Module: 26 - Failed to read file fileName. return code= rc
• AP- 13 Read DB Utils Parameters Module: 4 - Failed to open file fileName. return code= rc
• AP- 13 Read DB Utils Parameters Module: 9 - Failed to retrieve process path. return code= rc
• AP- 15 Set Variable Module: 9 - Failed to set environment variable var. return code= rc
• AP- 21 Operating System Resolve Module: 9 - Failed to convert path fullPath to short path
• AP- 23 Inquire Parameters Module: 12 - descriptionTopic (11)
• AP- 24 Update Parameters Module: 4 - Failed to create file fileName