Control-M/EM Messages

The following Control-M/EM messages are listed according to their ID number. The messages range from warning messages to error messages and contain an explanation and corrective action (where possible).

• 20002 Relate fields warning
• 20001 Number versions to keep warning
• 20003 Mail Server didn't respond
• 20004 Failed to send email
• 24001 Failed to refresh alert list in memory. Alert list will be refreshed in the next refresh cycle. (WARNING).
• 24002 Failed to load new alert (alert number = alertNumber, data center = dataCenter, severity = severity, order id = orderID). (ERROR)
• 24003 Failed to update alert (alert number = alertNumber, data center = dataCenter, severity = severity, order id = orderID). (ERROR)
• 24004 Failed to read alert from database (alert number = alertNumber) because of database problems. (ERROR)
• 24005 Failed to load alerts for data center dataCenter because of database problems. (ERROR)
• 24006 GUI Server failed to load alerts from the database when starting. Exiting... (SEVERE)
• 25001 Condition could not be sent to data center dataCenter (reason = reason, odate = date, condition = condition). (WARNING).
• 26001 DO Remedy is not Supported on platformName for service serviceName (ERROR)
• 26002 DO SIM is not Supported on platformName for service serviceName(ERROR)
• 26003 BIM Server is not installed (SEVERE)
• 26004 Mail Server didn't respond (SEVERE)
• 26005 Failed to create ticket in Remedy
• 26006 Service missing or invalid due time, check properties of service ${%s}
• 27001 Forecast Server is not installed (SEVERE)
• 27002 SLS Server Disconnection
• 28001 Bad or Unknown Auth Category: category, for Destination: destination, request: request
• 28002 Bad or Unknown Auth Level: level, for Destination: destination, request: request
• 28003 Bad or Unknown Request. Destination: destination, request: request
• 28004 Request Permission Denied. Destination: destination, request: request
• 28005 Fail To Get Component Details. Machine: host, Type: type, Name: component; Code: error
• 28006 CTL Request Failed. Machine: host, Type: type, Name: component; Code: error
• 28007 XML Parse Error.
• 28008 Handler Not Found For Request: name.
• 28009 XML Distributor Internal Error: message
• 28010 XML Distributor Internal Error: ID does not exist
• 28011 Gate Error Received: error.
• 28012 Gate Protocol Error: error.
• 28013 CMS Gate Request Timeout, Control-M: name Request: request.
• 28014 CMS Gate Request Aborted, Control-M: name Request: request.
• 28015 CMS Gate Discover Failed, Reason: reason; Host: host, Port: port.
• 28017 Component Info Parsing Error. Request: request
• 28018 Component With The Same Key Already exists. Key: key
• 28019 Unable to perform the operation. Reason: Component not found (It was probably deleted by another console). Component details: type= type host= host name= name
• 28020 SQL Operation Failed, RC: rc, Message: text
• 28021 Set Desired State Failed, RC: rc
• 28022 Unable to perform the operation. Reason: Control-M name not found (It was probably deleted by another console)
• 28023 Control-M With The Same Name Or Code Already exists. Name: name, Code: code
• 28024 Invalid Or Unknown Operation On Control-M; Operation: action
• 28025 Value cannot be empty for field: fieldName
• 28026 Bad value for field: fieldName, bad value is: value
• 28027 Failed to login as user: userName, rc: rc, message: text
• 28028 The following request failed: requestName, rc: rc, Message: text
• 28029 Invalid number for deleted old alerts. rc: rc, Message: text, Deleted: deletedNum
• 28030 A parameter with the same key already exists for paramName
• 28031 Can't update, parameter's details do not exist: paramName
• 28032 Fail To Save Desired State In Database.
• 28033 Invalid State Code.
• 28034 Invalid Or Unknown Process Type.
• 28035 Missing Mandatory Value tag.
• 28036 Invalid Or Unknown OS Type.
• 28037 User Not Registered
• 28038 CMS Gate is not connected to Control-M name. Verify that Control-M host hostName and Admin Port port are correct, and Control-M Configuration Agent is up and running
• 28039 Failed to connect to Control-M/Enterprise Manager Configuration Agent
• 28041 Database device deviceName is percentage percent full, lack of database space may risk EM functionality. (WARNING)
• 28042 Request for Machine Specification failed
• 28043 ManageSSL Request Invokation Failure
• 28054 DB is unavailable
• 29001 EM - Control-M name Communication Service Timed Out. timeout= time, type= type, instance= ID (ERROR)
• 29002 Upload of folderName Aborted (time-out), no answer from Control-M name. timeout= time, instance= ID
• 29003 Download of folderName Aborted (time-out), no answer from Control-M name.
• 29004 Download of folderName Aborted in Gateway, Control-M name.
• 29005 Gateway Client (name) CommEMBufferSize =maxSize Actual = actualSize. (WARNING)
• 29006 Gateway Control-M name CommCTMBufferSize = maxSize Actual = actualSize. (WARNING)
• 29007 Gateway Control-M name, Received Update, but job not found in EM database, For Order_ID orderID (decimalOrderID) Update Sequence Number number, Event Time time (ERROR)
• 29008 Active Download Failure. Control-M name, Odate date, Net Name (netName), Sequence Number number (ERROR)
• 29009 Create Alert Failure. (ERROR)
• 29010 Update Alert Failure. (ERROR)
• 29011 Gateway - GCS Communication Service Timed Out. Control-M name timeout= time, instance= ID, Condition= condition (ERROR)
• 29012 Gateway - GCS Communication Service Aborted In Gateway. Control-M name, instance= ID, Condition= condition (ERROR)
• 29013 Processing Of Updates Timed Out, Probably Database Slow Response Time. Control-M name, Timeout=time. (WARNING)
• 29014 Processing Of Updates Timed Out, Probably Database Slow Response Time Or Internal Error. Control-M name, Timeout=time. (ERROR)
• 29015 Processing Of All, Already Received Updates, Before Download Timed Out, Probably Database Not Responding or Internal Error. Control-M name, Timeout time. (ERROR)
• 29016 Unexpected Fatal Error During Update Processing. Control-M name. (ERROR)
• 29017 DO_MAIL message too long, message truncated. Folder Id: folderID. (WARNING)
• 29018 DO_MAIL message too long, message truncated. Folder Id: folderIDOrder Id: folderID. (WARNING)
• 29019 Workload Sync Error
• 29020 Workload Update Error
• 28021 Set Desired State Failed, RC: rc
• 28022 Unable to perform the operation. Reason: Control-M name not found (It was probably deleted by another console)
• 28023 Control-M With The Same Name Or Code Already exists. Name: name, Code: code
• 28024 Invalid Or Unknown Operation On Control-M; Operation: action
• 28025 Value cannot be empty for field: fieldName
• 28026 Bad value for field: fieldName, bad value is: value
• 28027 Failed to login as user: userName, rc: rc, message: text
• 28028 The following request failed: requestName, rc: rc, Message: text
• 28029 Invalid number for deleted old alerts. rc: rc, Message: text, Deleted: deletedNum
• 28030 A parameter with the same key already exists for paramName
• 28031 Can't update, parameter's details do not exist: paramName

28032 Fail To Save Desired State In Database.

• 28033 Invalid State Code.
• 28034 Invalid Or Unknown Process Type.
• 28035 Missing Mandatory Value tag.
• 28036 Invalid Or Unknown OS Type.
• 28037 User Not Registered
• 28038 CMS Gate is not connected to Control-M name. Verify that Control-M host hostName and Admin Port port are correct, and Control-M Configuration Agent is up and running
• 28039 Failed to connect to Control-M/Enterprise Manager Configuration Agent
• 28041 Database device deviceName is percentage percent full, lack of database space may risk EM functionality. (WARNING)
• 28042 Request for Machine Specification failed
• 28043 ManageSSL Request Invokation Failure
• 28054 DB is unavailable
• 29001 EM - Control-M name Communication Service Timed Out. timeout= time, type= type, instance= ID (ERROR)
• 29002 Upload of folderName Aborted (time-out), no answer from Control-M name. timeout= time, instance= ID
• 29003 Download of folderName Aborted (time-out), no answer from Control-M name.
• 29004 Download of folderName Aborted in Gateway, Control-M name.
• 29005 Gateway Client (name) CommEMBufferSize =maxSize Actual = actualSize. (WARNING)
• 29006 Gateway Control-M name CommCTMBufferSize = maxSize Actual = actualSize. (WARNING)
• 29007 Gateway Control-M name, Received Update, but job not found in EM database, For Order_ID orderID (decimalOrderID) Update Sequence Number number, Event Time time (ERROR)
• 29008 Active Download Failure. Control-M name, Odate date, Net Name (netName), Sequence Number number (ERROR)
• 29009 Create Alert Failure. (ERROR)
• 29010 Update Alert Failure. (ERROR)
• 29011 Gateway - GCS Communication Service Timed Out. Control-M name timeout= time, instance= ID, Condition= condition (ERROR)
• 29012 Gateway - GCS Communication Service Aborted In Gateway. Control-M name, instance= ID, Condition= condition (ERROR)
• 29013 Processing Of Updates Timed Out, Probably Database Slow Response Time. Control-M name, Timeout=time. (WARNING)
• 29014 Processing Of Updates Timed Out, Probably Database Slow Response Time Or Internal Error. Control-M name, Timeout=time. (ERROR)
• 29015 Processing Of All, Already Received Updates, Before Download Timed Out, Probably Database Not Responding or Internal Error. Control-M name, Timeout time. (ERROR)
• 29016 Unexpected Fatal Error During Update Processing. Control-M name. (ERROR)
• 29017 DO_MAIL message too long, message truncated. Folder Id: folderID. (WARNING)
• 29018 DO_MAIL message too long, message truncated. Folder Id: folderIDOrder Id: folderID. (WARNING)
• 29019 Workload Sync Error
• 29020 Workload Update Error
• 29021 Workload Update Canceled
• 35003 Automatic Failover completed
• 35005 Failover failed
• 35006 Fallback failed
• 35011 Set secondary as primary has failed
• 35023 Failed to sync to configuration file
• 35024 Moving to stand-by host
• 35028 Distributed EM Configuration Agent is unavailable
• 35029 Active EM Configuration Agent is unavailable
• 35030 Stand-by EM Configuration Agent is unavailable
• 35032 Installed Fix-Pack levels don't match
• 40001 EM Server failed to write audit action to the EM database (action = action, user = userName, return_code = rc, db error = error (ERROR)
• 40100 LDAP authentication can not be configured
• 40201 Database server is unavailable for more than number minutes. (WARNING)
• 40201 Database server is unavailable for more than number minutes. (WARNING)
• 40202 Communication with the database server was lost and can not be recovered. Server is shutting down in number minutes. (ERROR)
• 40203 Database server is unavailable for more than number seconds. Server is shutting down (WARNING) for CMS (SEVERE) for all other components
• 40204 Communication with the database server was lost and can not be recovered. Server is shutting down. (ERROR) for CMS (SEVERE) for all other components
• 40206 LDAP Directory Server is unavailable
• 40002 Control-M Configuration Manager failed to erase old audit records from the EM database. Please, delete them manually via erase_audit_data script. (return_code = rc, error = text (ERROR)
• 40205 Server failed to read system parameter type: paramType, name: paramName. (ERROR).
• 40401 Scheduling group with this scheduling folder name already exists. Change the scheduling folder name or the scheduling folder library.
• 40402 Scheduling group with this scheduling folder name already exists. Change the scheduling folder name.
• 40404 A regular scheduling folder with this name already exists. Change the scheduling folder name.
• 40404 A regular scheduling folder with this name already exists. Change the scheduling folder name.
• 40405 Lock Folder Failed
• 40406 Unauthorized user
• 40407 Create scheduling group failed.
• 40801 GUI Server failed to load active net. (server, collection). (ERROR)
• 40802 GUI Server failed to load archived net. (server, collection, net). (ERROR)
• 40803 GUI Server failed to load active net. Net table was not found in database. (server, collection). (WARNING)
• 40804 GUI Server failed to load archived net. Net table was not found in database. (server, collection, net). (WARNING)
• 40900 Periodic calendar (calendar_Control-M | calendar_name) used in periodic statistics definition ' periodic_stats_def_name' was not found. (ERROR)
• 41001 The soft limit of resource parameter parameter is too low. Soft limit should be equal to or larger than requested value.
• 41002 Both soft and hard limits of resource parameter parameter are too low. Limits values should be equal to or larger than requested value.
• 50001 Invalid character at position position. Input: string.
• 50002 Field contains invalid value string.
• 50003 Delimiter character expected at index position. Input: string.
• 50004 Maximum length for that value should be maxLength
• 50005 Invalid value number - out of range.
• 50006 Invalid character character at position position. Input: string
• 50007 The value contains invalid characters. Input string
• 50008 The value is too short. Input string.
• 50009 Invalid value: string
• 50010 String should not contain lower-case characters. Input string
• 50011 The field must have a value.
• 50012 Conflict: Job with value in field1 [and field2] field[s], cannot have value in the following fields: field3, field4 ... fieldn
• 50013 When the Tag Relationship is set to 'And', at least one scheduling tag must be selected.
• 50014 Field fieldName - The specified value is too long. Specify a shorter value.
• 60001 Failed to establish connection with Server
• 60002 Connection with the Server lost This error may be caused in the following cases:- The Control-M/Enterprise Manager Server is not responding or stopped running- The CORBA Naming Service is not running
• 60003 Invalid username or password: Make sure: - The user is defined properly - The given password is correct
• 60004 User is not authorized for that action
• 60005 Your password is about to expire
• 60006 User account is locked
• 60007 Login Failed: This error may be caused by any of the following: . - Server is not running under context serverName- CORBA configuration file is not configured properly.(Edit and save the file. Restart the application to apply the new settings.)
• 60009 Login Failed: Ensure Server under context serverName has the correct version.
• 60010 Login Failed: This error may be caused by any of the following:- User userName is not defined properly.- The specified password is incorrect.
• 60011 Login Failed: Password has expired
• 70001 Large amount of resources
• 70003 Form validation failed
• 70007 User not authorized
• 70008 Limit exceed
• 70009 Field length exceeds limit
• 70013 View joblist not available
• 70013 View joblist not available
• 70014 Invalid character
• 74001 Login failed: Failed to login to Control-M Configuration Server 'serverName' with user 'userName'
• 74002 Invalid database type: Actions on the database are not allowed since there was a problem in getting database details
• 74003 System parameter not selected: Please select a system parameter for action
• 74004 Missing parameter
• 74005 CMC Exception was raised: Action performed: action Exception message: text
• 74006 Unknown Database type: type. Action will terminate.
• 74007 Missing value
• 74008 Value out of range
• 74009 Invalid file name
• 74010 Action failed: Action action has failed for unknown reason. Please refer to the application logs for additional information
• 74011 File already exists
• 74013 Failed to send request to the Server: Failed action: action.
• 74014 Dialog validation error
• 74015 The connection to the server is lost. The connection will be restored when available.
• 74016 The connection to the server was restored.
• 74017 Control-M Configuration Manager: Your password has expired. Please refer to the Control-M/EM documentation for further information.
• 74018 Control-M Configuration Manager: Your password will expire shortly. Please refer to the Control-M/EM documentation for further information.
• 74019 Control-M Configuration Manager: The account is locked.
• 74020 Control-M Configuration Manager: Post login failed: reason
• 74021 Action succeeded: Action: action, Message returned: text.
• 74022 Duplicate component was identified
• 75002 Failed to retrieve database host and port.
• 75003 The Reporting Facility is unable to connect to the database.
• Ended not ok
• DATA CENTER %s WAS DISCONNECTED
• ECS3095 ORDER REQUEST FAILED - SMART FOLDER NOT FOUND IN THE AJF