Control-D Transformation Messages

In Control-D, transformation is the process of extracting data from print stream reports (such as AFP, Xerox, Postscript, or PDF) and converting them into a viewable format (such as TEXT, PDF or HTML).

While Control-D is transforming a report (during decollation with ON TRNCLASS, ON TRNDSN, or during a STORE=Y print mission), the following message template is used to generate messages:

REP26DW variableTextMsg

where variableTextMsg is a sub-message directly related to the event that produced it, providing specific information about that event.

This section documents the sub-messages of REP26DW.

Resource Error and Warnings MessagesLink copied to clipboard

This section includes transformation messages for the Control-D product.

BMCDAL0009E TCL.Size : Missing RAesource resourceName (Type: resourceType)Link copied to clipboard

Explanation: This message is issued under message REP26DW when a resource is missing, where resourceName is one of the following:

the name of the resource that failed
(if transformation of the entire report failed) the Document name

and resourceType is described in the table Resource type (resourceType) for BMCDAL0009E.

The system action is according to the specific error code. There are 3 options:

The transformation fails.
The transformation continues without the failed resource. A default resource will be used instead.
The transformation ends OK, for example, when the error code is 198312.

Corrective Action: If the transformation fails, do one of the following:

Try transforming again.
Correct the problem indicated by the error code description and try transforming again.
Set the Report Clique parameter FailOnMissingResources to Never and try transforming again.
Check the resources to determine if they were corrupted during the file transfer and try transforming again.

Resource Type (resourceType) for BMCDAL0009E

Type ID	Type name
1	AFP Overlay
2	AFP Page Segment
3	AFP Presentation Page
4	AFP Formdef
5	AFP Pagedef
6	AFP Coded Font
7	AFP Character Set
9	AFP Code Page
15	AFP Page
16	AFP Document
12289	Xerox Form
12290	Xerox image
12295	Xerox Font
12337	Xerox JSL
12338	Xerox Logo
28674	TBL (UNIMAP, GLYPHMAP, ASCCICVT)

BMCDAL0614E TransformObject.ConvertObject: ConvObject_Create Create resource failed: resourceName (Type resourceType), rc= returnCodeLink copied to clipboard

Explanation: This message is issued under message REP26DW when a resource is missing or the conversion of a resource to the internal format fails, where resourceName is one of the following:

the name of the resource that failed
(if transformation of the entire report failed) the Document name

resourceType is described in the table Resource type (resourceType) for BMCDAL0614E, and returnCode is described in the table Resource message return codes and text.

The system action is according to the specific error code. There are 3 options:

The transformation fails.
The transformation continues without the failed resource. A default resource will be used instead.
The transformation ends OK. For example when the error code is 198312.

Corrective Action: If the transformation fails, do one of the following:

Try transforming again.
Correct the problem indicated by the error code description and try transforming again.
Set the Report Clique parameter FailOnMissingResources to Never and try transforming again.
Check the resources to determine if they were corrupted during the file transfer and try transforming again.

Resource Type (resourceType) for BMCDAL0614E

Type ID	Type name
1	AFP Overlay
2	AFP Page Segment
3	AFP Presentation Page
4	AFP Formdef
5	AFP Pagedef
6	AFP Coded Font
7	AFP Character Set
9	AFP Code Page
15	AFP Page
16	AFP Document
12289	Xerox Form
12290	Xerox image
12295	Xerox Font
12337	Xerox JSL
12338	Xerox Logo
28674	TBL (UNIMAP, GLYPHMAP, ASCCICVT)

Resource Message Return Codes and Text

Severity	Return code	Message text
NONCRITICAL	131846	Requested resource not found--continuing without resource (or with a default resource)
VISUAL	198147	Medium map specified in IMM not found - probably wrong/no Formdef used
VISUAL	198197	Afp Page Segment is missing
VISUAL	198198	Afp Overlay is missing
VISUAL	198199	Medium map specified in IMM not found - probably wrong/no Formdef used
VISUAL	198200	Afp Coded font missing - another font will be substituted
VISUAL	198201	Invalid Afp structure in Afp Codepage or Afp CharacterSet
VISUAL	198312	Invalid Afp after EDT - stop processing
CRITICAL	262400	Memory allocation error
CRITICAL	262407	Invalid value in Row-Col parameters
CRITICAL	262917	Memory allocation error
CRITICAL	262918	Requested resource not found - cannot continue transformation
CRITICAL	262919	Unknown resource type was requested
CRITICAL	262921	Internal logical error
CRITICAL	263680	Invalid Afp structure (no BDT)
CRITICAL	263681	Invalid Afp structure (no PageEnv)
CRITICAL	263682	Invalid Afp structure (problem reading SFI)
CRITICAL	263684	Invalid Afp structure (problem in afp page data)
CRITICAL	263686	Invalid Afp structure (no Active Environment Group)
CRITICAL	263688	Internal error (problem with anchors)
CRITICAL	263689	Memory allocation error
CRITICAL	263696	Internal error - storing of private data failed
CRITICAL	263697	Unsupported object type
CRITICAL	263698	Internal error (Could not retrieve private data in job start)
CRITICAL	263699	Unknown object type
CRITICAL	263700	Internal error (Buffer callback function not supplied)
CRITICAL	263701	Internal error (error in put callback)
CRITICAL	263702	Afp buffer callback not created - data is not valid Afpds
CRITICAL	263704	Internal logical error
CRITICAL	263705	Internal error--error creating internal page format
CRITICAL	263712	Memory allocation error
CRITICAL	263713	Memory allocation error
CRITICAL	263717	Invalid Afp structure--no BPG record in page
CRITICAL	263744	Invalid Afp structure in Afp Image
CRITICAL	263745	Invalid Afp structure in Afp Image
CRITICAL	263746	Invalid Afp structure in Afp Image
CRITICAL	263747	Invalid Afp structure in Afp Image
CRITICAL	263748	Invalid Afp structure in Afp Image
CRITICAL	263749	Invalid Afp structure (no PageEnv in PageSegment)
CRITICAL	263750	Invalid Afp internal image in PageSegment
CRITICAL	263762	Invalid Afp font raster pattern
CRITICAL	263763	Afp Outline Font is currently not support
CRITICAL	263764	Afp Font without raster patterns is currently not supported Only the new C0 FONT format is supported. The corresponding C0 FONTs must be added to the resource library and all FONTs starting from C1, C2, C3, C4 must be removed from resource library.
CRITICAL	263844	Invalid Afp structure - no EPG record in page
CRITICAL	263845	Invalid Afp structure - no BPG record in page
CRITICAL	263846	Invalid Afp MCF record in Active Environment Group
CRITICAL	263847	Invalid Afp Active Environment Group - PGD record missing
CRITICAL	263849	RSTACK EOF, no data for Xerox page
CRITICAL	263850	Invalid Afp data - record read did not start with x'5A'
CRITICAL	263851	Goca object failed
CRITICAL	263852	Unsupported Color Model
CRITICAL	263853	JPG failure
CRITICAL	263854	JPG EOF
CRITICAL	263855	JPG UNKNOWN ERROR
CRITICAL	263856	Invalid Band Length
CRITICAL	263857	Unsupported bits per Band
CRITICAL	263858	Invalid Band Color Model
CRITICAL	263859	Invalid JPEG RELRES
CRITICAL	263860	LZW Failure
CRITICAL	263861	LZW unknown error
CRITICAL	263862	ENG without BNG
CRITICAL	263863	TLE without BNG
CRITICAL	263864	IO ERROR when reading file

Xerox Error and Warnings MessagesLink copied to clipboard

This section includes Xerox error and warning messages for the Control-D product.

BMCDAL0678W Xerox Warning cdpXerox returnCode : messageTextLink copied to clipboard

Explanation: This warning message is issued under message REP26DW when transforming a Xerox report. Transformation continues. The supported returnCode and messageText values are listed in the table Xerox warning messages.

Corrective Action: Read the message in order to determine if user action is required.

Xerox Warning Messages

Return code	Message text
109	4197 encrypted/decrypted file wrong length
113	bad character descriptor, ignored
114	8790 leading value inconsistent
115	8790 character height inconsistent
116	8790 font has obsolete(IG 1) bitmap fmt
117	8790 font has unknown bitmap format
118	New font with 10 byte FST entries
119	font's space character' width not equal average character space value PTF019
123	cdesc inconsistent w/bitmap scan results
124	#bytes/scan not even for 8790 bitmap
128	requested output type unknown - no o/p
129	can't find output CDesc
130	8790 char ofs would be negative, set to 0
131	wng: cbm.c_buf already allocated
145	unknown token in header
148	bad Line Control Code in IMG
149	unexpected SOI code within IMG
150	data code error in IMG
151	too many samples in current line
152	bad arg to Axx
153	decode error ddd: Line#: 0xXXX=%DDD
154	attempt to read beyond IMG bytecount
155	EOF detected while reading IMG
156	IMG header not found in file
157	IMG line length bad
2700	bad or unsupported JSL command in JSL file
2701	JDL not found in library
2702	JDE not found in JDL
6004	Invalid JSL Command
6005	Unsupported PDL keyword
6006	BEGIN value bad in PDE
6007	LINE PDL parameter invalid
6008	VFU channel assignment invalid
6013	bad TCODE parameter
6025	COPY parameter invalid
6026	FEED parameter invalid
6027	COVER parameter invalid
6028	shift parameter invalid
6029	OFFSET parameter invalid
6030	NUMBER parameter invalid
6031	PAPERSIZE parameter invalid
6032	font character not in font
6033	XEROX FNT Font FILE INVALID
6034	JSL VOLUME HOST parameter INVALID
6035	RECORD ADJUST parameter invalid
6036	RECORD LMULT parameter invalid
6037	RECORD LTHFLD parameter invalid
6038	RECORD OFFSET parameter invalid
6039	RECORD POSTAMBLE parameter invalid
6040	RECORD PREAMBLE parameter invalid
6041	RECORD FORMAT PARAMETER INVALID
6042	BLOCK FORMAT PARAMETER INVALID
6045	BLOCK ADJUST parameter invalid
6046	BLOCK LMULT parameter invalid
6047	BLOCK LTHFLD parameter invalid
6048	BLOCK OFFSET parameter invalid
6049	BLOCK POSTAMBLE parameter invalid
6050	BLOCK PREAMBLE parameter invalid
6051	BLOCK LENGTH parameter invalid
6052	itext parameter invalid
6053	otext parameter invalid
6054	rtext parameter invalid
6055	rform parameter invalid
6056	ACCT DEPT parameter invalid
6057	ACCT USER parameter invalid
6058	output MODIFY parameter invalid
6060	System catalog entry invalid
6061	invalid keyword in system catalog entry
6062	Incomplete entry in system catalog
6063	System Catalog backup file cannot be deleted/renamed over
6066	RPMF Parm entry invalid
6067	invalid keyword in RPMF Parm entry
6068	Incomplete entry in RPMF Parm
6079	PDE cannot be found in current JSL or in system catalog
6080	PCC Table not found in current JSL or in system catalog
6081	Default PCC Table not found in current JSL or in system catalog (SYSCTLG.cat)
6082	Invalid CODE table - not found
6083	CRITERIA entry not found
6089	Image header invalid "Interpress" string not found
6091	Page Interleaved graphic after page transition
6092	Print Line ignored searching for Page Interleaved graphic after page transition
6093	Premature end of file occurred searching for Page Interleaved graphic after page transition
6100	RPMF parameter keyword unsupported
6101	XFONT table parameter keyword unsupported
6102	Invalid orientation in XFONT, PCLFONT statement
6103	File not a supported Xerox font
6106	PFONT parameter not found on XFONT statement
6107	Invalid record length parameter
6108	Invalid VFU table name
6109	VFU table is not found
6110	TCODE table is not found
6111	Invalid parameters in TCODE statement
6117	CME parameter is missing
6129	Font file size is incorrect
6130	System catalog resource name requires 8 characters or less
6137	File is too big to keep in storage
6138	Null pointer passed to fPrintLogoStats
7003	default font is being substituted
7006	bad entry in font mapping table file
7007	bad Type parameter in Symbol Set entry
7010	font character not in target font symbol set
7011	Error in PCLFONT command in the Font Table file
7012	character to be printed does not have a character in the related PCL font set
7014	Font point size not specified and font files not available
7015	Font pitch not specified for FIXED font default substituted
7016	font file open failed when downloading font
7019	Command parser has found that a required parameter in a command is missing
7024	The above error occurred in the following command:
7025	no messages produced by conversion program
7026	buffer memory overflowed - being reallocated
7027	no character available in font to map X'1B' (Escape) into
7028	attempt to position PCL cursor off page
7029	Attempt to delete file failed
7031	Xerox Font not found
7032	Default font will be substituted, page will probably be incorrect
7034	Font index offset incorrect, usually means offset longer than record
7036	Invalid IDR table name
7037	IDR table is not found
7038	Ink index offset incorrect, usually means offset longer than record
7039	Invalid IDFAULT parameter
7040	Hex 0A or 0B in form DL but no INK font in TL
7041	Font name in Xerox font header is different than font file name

BMCDAL0679E Xerox Error cdpXerox returnCode : messageTextLink copied to clipboard

Explanation: This error message is issued under message REP26DW when transforming a Xerox report. The supported returnCode and messageText values are listed in the table Xerox error messages.

Transformation stops and ends with an error.

Corrective Action: Correct the error as described in the message.

Xerox Error Messages

Return code	Message text
1	processor long is less than 32 bits
2	file does not exist
3	input file in unrecognizable format
4	error writing output font file
5	attempt to read beyond end of file
6	unable to write to file
7	seek error
8	heap memory exhausted
9	Security check failed -added URM013
10	unable to read from file
11	bad option in arglist
12	bad argument count
18	incomplete PCL command in file
19	PCL command string too long
20	pcl font header wrong type
21	pcl header wrong type
22	bitmap dimensions out of range
25	output file size >64k
26	system error -- to_canon() function
27	8790 font has unsupported orientation
30	bad interpress header
31	EOF encountered while trying to parse hdr
32	scpixels inconsistent in header
33	at least one IMG parameter is missing
34	NRange not in 5..8
35	nscans too large or too small
36	NRange(%d) not implemented
37	no Start Of Image code in compressed array
39	input band buffer too few scans
42	sys err in pagein
44	error swapping in inband
46	invalid scpixels in header
47	invalid resolution in header
58	bad decompression
59	error writing temporary file
60	error initializing PCL output
61	error writing PCL output
62	error finalizing PCL output
63	no heap to allocate temp buffers
120	file tell operation returned error
6000	DJDE has no END parameter in packet
6001	DJDE Keyword missing
6002	DJDE Invalid Keyword
6003	JSL could not be read & processed
6010	paper size unsupported
6011	two page-oriented DJDEs found on one logical page - only the first is processed
6012	Internal error occurred - see description
6014	bad Criteria parameter in JSL
6015	invalid parameter on TABLE statement in JSL
6016	invalid RSTACK statement in JSL
6017	invalid RPAGE statement in JSL
6018	invalid ROFFSET statement in JSL
6019	invalid RSUSPEND statement in JSL
6020	invalid RRESUME statement in JSL
6021	invalid BANNER statement in JSL
6022	Error in IMAGE DJDE
6023	Error in GRAPHIC DJDE
6024	error reading form file - probably not found
6043	RECORD CONSTANT parameter invalid
6044	BLOCK CONSTANT parameter invalid
6059	System Catalog error
6064	I/O error on input file
6065	RPMF Parm error
6069	error in user font table
6070	fontindex invalid, default font substituted
6071	font name in JSL, DJDE or RPMF is invalid, probably too long
6072	Pagesize in RPMF parameter is invalid
6073	RPMF MARGIN parameter invalid
6074	FILE Processing Error - Cannot open destination file
6075	INCLUDE cannot find CATALOG jsl statements
6076	INCLUDE name invalid (too long)
6077	ONLINE IMAGE data record does not have correct terminating character
6078	font number invalid - out of range of current font list
6084	syntax error encountered in scan for keyword
6085	TEST Criteria parameter invalid
6086	invalid ASSIGN parameter on PCC statement
6087	Repeat count in text string invalid
6088	CME in Invalid sequence at line %u Column %d
6090	IMAGE file missing - open failed
6094	Document interleaved graphic was not found, defaulting to Random mode graphic
6104	Converted font file is not found
6105	Converted font file could not be opened
6112	Required constant in TABLE command has been missing
6113	Invalid DJDE SIDE parameter
6114	Previous image is incomplete
6115	Invalid DJDE BATCH parameter
6116	DJDE CANCEL of non-active GRAPHIC failed
6118	Label record invalid
6119	File is being processed
6120	Excess card writing
6121	Card images is not supported
6122	File pointer can not be NULL
6123	Image control block is not available for header
6124	Unable to open image output file
6125	Invalid image header
6126	Input/output error writing image file
6127	Document interleave image could not be found
6128	Premature end of file occurred reading image file
6131	CME constant font is not in font list default
6132	Image file could not be open
6133	I/O error writing DJDE to output metacode file
6134	I/O error writing RSTACK to output metacode file
6135	Memory overwrite for buffer
6136	Count negative memory deallocation error-buffer
7001	Image Conversion failed
7002	FNT/LGO Conversion failed
7004	I/O error writing to output file
7005	bad header in PCL font file
7008	bad parameter in symbol set command
7009	bad value in Unicode FORMAT A record
7013	unable to get JFCB for infile on MVS
7017	statistics keyword in configuration file has invalid value
7018	statistics file could not be opened
7020	error occurred in memory management - buffer or pool not found during free
7021	Display Field Descriptor block contained invalid character type
7022	internal error DFD/TLDL buffer chain missing
7023	error encountered performing a file seek
7030	Unable to add font control table entry
7033	Xerox FORM missing
7035	Color name in ILIST is too long