Operator Command Quick Reference

The following is a list of some of the more common Control‑M Monitor operator commands explained in this chapter.

In these commands, CONTROLM represents the name of the Control-M monitor.

The CTMPLEX Monitor column indicates on which monitor the operator command can be run in CTMPLEX mode. Possible values are:

• GSM - On the Global Sysplex Manager (GSM) system only.
• Both - On both the GSM and LSM systems.
• None - Not relevant to CTMPLEX. For example, CMEM has its own monitor and does not use the Control‑M monitor.

  Table 85 Operator Command Quick Reference

  Category and Task	Command	CTMPLEX Monitor
  General Operations
  Activating the Control-M Monitor	S CONTROLM	Both
  Shutting Down the Control-M Monitor	P CONTROLM	Both
  Modifying the Control-M Sleeping Interval	F CONTROLM,INTERVAL=xx	GSM
  Displaying Control-M Installation Parameters	F CONTROLM,SHOWPARM	Both
  Dynamically Refreshing Control-M Parameters	F CONTROLM,NEWPARM
  Displaying a List of Allocated Datasets	F CONTROLM,LISTDD	Both
  Dynamically Reloading User Exits	F CONTROLM,RELOAD=userExit	GSM
  Stopping Control-M monitors - Using STOPALL to shut down the Control-M monitor	F CONTROLM,STOPALL	GSM
  Writing accumulated performance data on demand	F CONTROLM,PERFDATA=NOW	Both
  Modifying the performance data accumulation interval	F CONTROLM,PERFDATA=nnnn	Both
  Quiesce Time Management
  Scheduling Quiesce Time - Setting a Planned Shutdown Time (Quiesce Time)	F CONTROLM,QUIESTIME=hhmm	GSM
  Stopping submission of any Job	F CONTROLM,QUIESTIME=NOW	GSM
  Cancelling requests for Quiesce Time	F CONTROLM,QUIESTIME=OFF	GSM
  Displaying the current status of QUIESTIME	F CONTROLM,QUIESTIME=DISPLAY	GSM
  Quiesced Resource Management
  Scheduling quiesced qualitative resources - Activating and Deactivating Quiesced Quantitative Resources	F CONTROLM,QUIESQRES=resource-name,hhmm	GSM
  Stopping the use of a quantitative resource	F CONTROLM,QUIESQRES=resource-name,NOW	GSM
  Cancelling previous requests for quiesced resources	F CONTROLM,QUIESQRES=resource-name,OFF	GSM
  Displaying the current status of QUIESQRES	F CONTROLM,QUIESQRES=resource-name,D	GSM
  Destination Tables
  Loading a New Dynamic Destination Table (IOADEST)	F CONTROLM,NEWDEST=member	GSM
  Refreshing the Mail Destination Table	F CONTROLM,NEWMAILDST	GSM
  Loading and Refreshing the SNMP Destination Table (SNMPDEST)	F CONTROLM,NEWSNMPDST	GSM
  Reloading the WLMSCTBL table	F CONTROLM,NEWLMSCTBL	GSM
  Deadline Scheduling and Job Network Dependencies
  Refreshing DUE OUT times - Refreshing Deadline Scheduling and Job Network Dependencies	F CONTROLM,DEADLINE	GSM
  Shifting the DUE OUT time forward - Shifting DUE OUT Times for Control-M Jobs	F CONTROLM,SDOUT=+nnn	GSM
  Shifting the DUE OUT time backward - Shifting DUE OUT Times for Control-M Jobs	F CONTROLM,SDOUT=-nnn	GSM
  Refreshing PRIORITY values - Refreshing Deadline Scheduling and Job Network Dependencies	F CONTROLM,PROP	GSM
  Refreshing both the DEADLINE (DUE OUT) times and the PRIORITY values - Refreshing Deadline Scheduling and Job Network Dependencies	F CONTROLM,REFSCHED	GSM
  Refreshing the List of Dependent Jobs in the Job Dependency Network File - Refreshing Deadline Scheduling and Job Network Dependencies	F CONTROLM,NET	GSM
  Simultaneously refreshing the DEADLINE (DUE OUT) times, PRIORITY values, and the List of Dependent Jobs in the Job Dependency Network (NET) - Refreshing Deadline Scheduling and Job Network Dependencies	F CONTROLM,REFALL	GSM
  Security
  Refreshing the Control-M Security Cache	F CONTROLM,NEWSECDEF	GSM
  Automatic Tape Adjustment Facility
  Refreshing the UNITDEF Table (Unit Definition Table)	F CONTROLM,NEWUNITDEF	GSM
  Trace Facility
  Using the Control‑M Internal Trace facility - Problem Determination using the Internal Trace Facility	F CONTROLM,TRACE=level	GSM
  Supporting Interfaces
  Switching from SAPI to PSO Support	F CONTROLM,SAPI=NO	GSM
  Switching from PSO to SAPI Support -Switching from SAPI to PSO Support	F CONTROLM,SAPI=YES	GSM
  Identity Level (IDL) facility	F CONTROLM,IDL=<IDLModifyCommand>	Both
  AutoEdit Variables and the Cache
  Reloading AutoEdit definitions to cache - Loading %%GLOBAL Members to Cache	F CONTROLM,AECACHE=RELOAD	GSM
  Reloading AutoEdit definitions using new list members to cache -Loading %%GLOBAL Members to Cache	F CONTROLM,AECACHE= RELOAD(membername)	GSM
  Stopping cache until AECACHE=RELOAD - Loading %%GLOBAL Members to Cache	F CONTROLM,AECACHE=STOP	GSM
  Newday Operations
  Modify the number of intervals to wait for Newday	F CONTROLM,NEWDAYWT= numberOfIntervals	GSM
  Special Newday Parameters	F CONTROLM,NEWDAY=expression	GSM
  Optimization Commands
  Load-Index Optimization Commands	F CONTROLM,LOAD-INDEX <commands>	Both
  Displaying the status of active Workload Policies	F CONTROLM,WLLIST	GSM
  Refreshing Workload Policies	F CONTROLM,WLREFRESH	GSM
  CMEM Facility
  Manually Activating the CMEM Monitor - Activating the CMEM Facility	S CTMCMEM	None
  Shutting Down the CMEM Facility - Deactivating the CMEM Facility	F CTMCMEM,STOP Or P CTMCMEM	None
  Replacing an Active CMEM Monitor - Replacing an Active CMEM Monitor	S CTMCMEM	None
  Replacing the Active CMEM Executor Modules -Replacing the Active CMEM Executor Modules	F CTMCMEM,RELOAD=module	None
  Manual Loading of Rules - Manual Loading of Rules using Operator Commands	F CTMCMEM,C=library(table)	None
  Replacing All CMEM Rule Tables in All CPUs - Replacing All CMEM Rules Tables in All CPUs	F CONTROLM,NEWCONLIST	None
  Deleting (Deactivating) an Active Rule Table	F CTMCMEM,D=library(table)	None
  Displaying Active Rules	F CTMCMEM,DISPLAY[=DETAIL]	None
  Controlling CMEM Rule Operation Mode	F CTMCMEM,LOG=mode	None
  Modifying the CMEM Sleeping Interval	F CTMCMEM,INTERVAL=nn	None
  Refreshing the CMEM Security Cache	F CTMCMEM,NEWSECDEF	None
  CMEM Internal Trace	F CTMCMEM,TRACE=nn	None
  Displaying Internal Resource Utilization Statistics	F CTMCMEM,USAGESTATS	None
  Journaling
  Journal File Commands	F CONTROLM,JOURNAL=ENABLE	GSM
  Journal File Commands	F CONTROLM,JOURNAL=DISABLE	GSM
  AJF Space Reuse Facility
  Activate deletion for space reuse of jobs copied to History AJF - History file processing for AJF space reuse	F CONTROLM,HISTALOC=ENABLE	GSM
  Deactivate deletion for space reuse of jobs copied to History AJF - History file processing for AJF space reuse	F CONTROLM,HISTALOC=DISABLE	GSM
  CTMPLEX Facility
  Start the Control-M monitor on any system. The monitor becomes either a GSM or LSM monitor depending on whether there are other Control-M monitors of the same CTMPLEX. - Controlling CTMPLEX	S CONTROLM	GSM
  Stop any LSM (when issued on the system where an LSM runs) or stop the entire CTMPLEX (when issued on the system where the GSM runs). - Controlling CTMPLEX	P CONTROLM	GSM
  Activates or inactivates Work Balancing mode, overriding the value of parameter BALANCEM - Controlling CTMPLEX	F CONTROLM,BALANCE=YES|NO	GSM
  Stops all LSM monitors. The GSM monitor continues working in regular (not CTMPLEX) mode. - Controlling CTMPLEX	F CONTROLM,STOPPLEX	GSM
  Stops the GSM. - Controlling CTMPLEX	F CONTROLM,STOPGSM	GSM
  Displays information about all monitors (GSM and LSMs) of the CTMPLEX. -Controlling CTMPLEX	F CONTROLM,LISTPLEX	GSM
  Resumes CTMPLEX processing after environmental errors related to the CTMPLEX Coupling facility structure occur. - Controlling CTMPLEX	F CONTROLM,STARTPLEX	GSM
  Displays information about the GSM from an LSM - Controlling CTMPLEX	F CONTROLM,WHOGLOBAL	Both
  Issues a diagnostic dump (to any of SYS1.DUMPxx datasets) in order to obtain the contents of the CTMPLEX Coupling facility structure. - Controlling CTMPLEX	F CONTROLM,DUMPPLEX	GSM