East Asian (CJK) Language Support Configuration

The CJK language set includes support for the following languages:

Traditional Chinese
Simplified Chinese
Japanese
Korean

CJK supports specific job definition attributes, product files, and command line utilities, as follows:

CJK Support for Job Definition Attributes
CJK Support for Product Files
CJK Support for Command-Line Utilities

To set up your environment to support the CJK language set, you must configure and synchronize all the computer systems and databases before configuring the language settings for the following Control-M components:

Agent
Control-M/EM
Control-M/Server
Control-M Reports
Control-M for AFT

Control-M/EM can communicate in English with earlier versions of Control-M/Server and with Control-M for z/OS installations that do not handle CJK characters. This communication is possible because the Gateway detects the type and version of the connected Control-M/Servers (and other Control-M installations, such as z/OS) and translates the data accordingly.

Enabling Localization in Control-M Web

This procedure describes how to enable CJK localization in Control-M Web.

Begin

Configure the ExtendedWebLanguages system parameter with the following values, as described in Control-M Web Advanced System Parameters:
- Simplified Chinese
- Traditional Chinese
Log in to Control-M Web.
Click the top right username icon, and from the drop-down list click Preferences.

The Preferences window appears.
From the Language drop-down list, select Simplified Chinese or Traditional Chinese, as described in User Preferences.

Setting the Code Page for CJK Support on Windows

This procedure describes how to set the code page for CJK support on Windows. This must be done before you install Control-M.

Update the locale to the same value on every computer running Windows that runs the following components:

Control-M/EM
Control-M/Server
Agent
Control-M Application Plug-Ins

Begin

From a command line, type chcp <codePage>, where <codePage> can be one of the following values:
- 932: ANSI/OEM, Japanese Shift-JIS
- 936: ANSI/OEM, Simplified Chinese GBK
- 949: ANSI/OEM, Korean
- 950: ANSI/OEM, Traditional Chinese Big5
  
  chcp 932.
  
  If the code page is invalid, contact your system Administrator to install the required code page.
  
  For Control-M components to communicate properly with each other, you must set the locale for all product components to the same value. Discrepancies between locale settings can corrupt data while data is passed from one component to another.
Ensure that the corresponding code page is selected on the list of Code Page Conversion Tables.

Setting the Locale Environment on UNIX or Linux

This procedure describes how to set the locale environment on a UNIX and Linux machine. This should be done on computers that runs components of the following products:

Control-M/EM
Control-M/Server
Agent
Control-M Application Plug-Ins

Begin

Ensure that the required language locale is present on the computer.

Use the same language locale for all affected computers. Discrepancies between locale settings, especially those involving different character sets, can corrupt data as it passes between components.
1. To get a list of locales available on your computer, enter the locale -a command.
2. Confirm that the list includes the required locale as described in CJK character set locale settings for UNIX and Linux. If the required locale is missing, ask your UNIX administrator to install it.

When configuring Agent on operating systems not listed in the following table, use the locale setting for the operating system that corresponds to the one selected for ControlM/EM and Control-M/Server. Contact your UNIX administrator for additional assistance.

CJK Character Set Locale Settings for UNIX and Linux

The following table lists the CJK character set locale settings for UNIX and Linux.

Language	AIX	Solaris	Linux
Chinese (Simplified)	ZH_CN.UTF-8	zh.UTF-8	zh_CN.utf8
Chinese (Traditional)	ZH_TW.UTF-8	zh_TW.UTF-8	zh_TW.utf8
Japanese	JA_JP.UTF-8	ja_JP.UTF-8	ja_JP.utf8
Korean	KO_KR.UTF-8	ko.UTF-8	ko_KR.utf8

Configuring CJK Support for Jobs Submitted on Agentless Hosts

This procedure describes how to configure CJK support for jobs submitted on an Agentless Host.

Begin

Configure the Agentless Host with Agents that are set to the required encoding as defined in Agent Language Encodings Available through ctmunixcfg and Agent Language Encodings Available through ctmwincfg.
Select Agentless Hosts according to the encoding available on either Windows or UNIX platforms. Windows CJK encoding is available only on Agents installed on Windows. Similarly, UNIX CJK encoding is available only on Agents installed on UNIX.

Configuring Language Support on Agent

This procedure describes how to configure language support for CJK on the Agent.

Begin

From the command-prompt window, run the ctmagcfg command-line utility.
Select 7 Advanced Parameters.
Select 7 Foreign Language Support and then select CJK.
Set the encoding that the Agent uses to run jobs.
Ensure that the required language locale or code page is present on the computer, as described in CJK Locale Settings for Operating Systems Jobs. On UNIX, you can use the locale -a command to list the information.
Ensure that the environment of the owner responsible for running jobs is set to the correct locale.
Use the appropriate command-line utility to set the language encoding for jobs that the Agent runs.
From UNIX, run the ctmunixcfg utility, and set the CJK Encoding parameter to one of the language encodings, as listed in Agent Language Encodings Available through ctmunixcfg. The Agent assumes that all jobs run in the same user-defined locale.
From Windows, run the ctmwincfg utility and set the CJK Encoding parameter to one of the available language encodings, as listed in Agent Language Encodings Available through ctmwincfg.
Restart the Agent.

CJK Locale Settings for Operating Systems Jobs

The following table lists the CJK locale settings for operating system jobs.

Language	AIX	Solaris	Linux	Windows
Chinese (Simplified)	ZH_CN.UTF-8 Zh_CN.GBK Zh_CN.GB18030	zh.UTF-8 zh.GBK zh_CN.GB18030	zh_CN.utf8 zh_CN.gb18030 zh_CN.gbk	CP936
Chinese (Traditional)	ZH_TW.UTF-8 Zh_TW.big5 zh_TW.IBM-eucTW	zh_TW.UTF-8 zh_TW.BIG5 zh_TW (EUC)	zh_TW.utf8 zh_TW.big5 zh_TW.euctw	CP950
Japanese	JA_JP.UTF-8 JA_JP.IBM-eucJP Ja_JP.IBM-943	ja_JP.UTF-8 ja_JP.eucJP ja_JP.PCK (Shiftjis)	ja_JP.utf8 ja_JP.eucjp ja_JP.PCK (Shiftjis)	CP932
Korean	KO_KR.UTF-8 KO_KR.IBM-eucKR	ko.UTF-8 ko (EUC)	ko_KR.utf8 ko_KR.euckr	CP949

Agent Language Encodings Available through ctmunixcfg

The following table list the language encodings available through the ctmunixcfg utility.

Job Language Option	Encoding
UTF-8	*.UTF-8
Japanese EUC	*.eucJP
Japanese SHIFT-JIS	Ja_JP.IBM-943 ja_JP.SJIS ja_JP.PCK
Korean EUC	*.eucKR
Simplified Chinese GBK	*.GBK
Simplified Chinese GB	*.GB18030
Traditional Chinese EUC	*.eucTW
Traditional Chinese BIG5	*.big5

Agent Language Encodings Available through ctmwincfg

The following table lists the language encodings available through the ctmwincfg utility.

Job Language Option	Encoding
Japanese	CP932
Korean	CP949
Simplified Chinese	CP936
Traditional Chinese	CP950
UTF-16	UNICODE

CJK Database Configuration

Before creating a Control-M/Server or Control-M/EM database, ensure that the database server fulfills the prerequisites, as listed in CJK Prerequisites.

Review the additional CJK support issues, as described in CJK Support Issues for Database Installation when creating or installing a new database.

CJK Prerequisites

The following table lists the CJK prerequisites.

Type of Database	Prerequisites
PostgreSQL	Installed with UTF8 character sets
Oracle	Configured with AL32UTF8 or UTF8 character sets
MSSQL	None

CJK Support Issues for Database Installation

The following table lists the support issues for database installation.

If You Are	CJK Support Issue
Creating a Control-M/Server or Control-M/EM database on an Oracle database server	If CJK settings are detected, they are inherited automatically from the database server. Installation continues.
Creating a Control-M/Server or Control-M/EM database on an MSSQL database server	If CJK settings are detected, you are asked whether CJK support is required.
Installing a BMC-supplied PostgreSQL database	Choose the custom option for installation mode. During the custom installation, you are asked whether CJK support is required.

Configuring English Support on Japanese Microsoft Windows 7 and Higher

This procedure describes how to configure English support on Japanese Microsoft Windows 7 and higher. The settings vary according to the version of Windows installed.

The system locale for all of the following product components must be set to the same value:

Control-M/EM
Control-M/Server
Agent
Control-M Application Plug-Ins

Begin

Set the system locale and language settings to English before installing any of the associated Control-M components.
1. From the Control Panel select Regional Options > Language Settings.
1. To receive all messages in English, select Western Europe and United States.
1. At Control Panel > Regional Options > Your locale (location), select English (USA).

After installation, reconfigure your computer to work with a non-English language.

Configuring English Support on Japanese UNIX

This procedure describes how to configure English support on Japanese UNIX systems that run the following components:

Control-M/EM
Control-M
Control-M Reports
Control-M/Server
Agent
BMC Batch Impact Manager
Control-M Application Plug Ins

Begin

At the command prompt, type locale -a.

A list of locales available on your computer appears.
Check that C, c, POSIX, or an English locale, as listed in ISO English-character-set locale settings for UNIX or Linux (for Japanese operating systems) is displayed. If none of these locales is displayed, ask your UNIX administrator to install it.
Set the following values in the .cshrc file. If necessary, add lines for these environment variables.

Add the lines in the same order as the environment variables, as listed in UNIX environment variables for English on Japanese systems in .cshrc.
Run the source ~/.cshrc command to apply the new settings to the environment.

ISO English-Character-Set Locale Settings for UNIX or Linux (for Japanese Operating Systems)

The following table lists the ISO English-character-set locale settings for UNIX or Linux for a Japanese operating system.

Language	AIX, Solaris, Compaq (OSF)	Linux (Red Hat)	Linux (SuSE)
English (USA)	en_US.ISO8859-1	en_US.iso8859-1	en_US
English (British)	en_GB.ISO8859-1	en_US.iso8859-1	en_GB

UNIX Environment Variables for English on Japanese Systems in .cshrc

The following table list the UNIX environment variables for English on Japanese systems in .cshrc.

Environment Variable	Description / Value
LC_ALL	*.UTF-8
LC_CTYPE LANG LC_COLLATE LC_MESSAGES	These environment variables should be C (or c, as defined on the computer). If the C (or c) locale is not present, you can use POSIX or one of the English locales that appear in the previous table. Set these variables by adding the following lines to the .cshrc file: setenv LC_CTYPE C setenv LANG C setenv LC_COLLATE C setenv LC_MESSAGES C

Environment Variable

Description / Value

LC_ALL

*.UTF-8

LC_CTYPE

LANG

LC_COLLATE

LC_MESSAGES

These environment variables should be C (or c, as defined on the computer).

If the C (or c) locale is not present, you can use POSIX or one of the English locales that appear in the previous table.

Set these variables by adding the following lines to the .cshrc file:

setenv LC_CTYPE C

setenv LANG C

setenv LC_COLLATE C

setenv LC_MESSAGES C

CJK Support for Product Files

The following table summarizes the level of CJK support for various types of product files.

File Type	File Names and Paths	File Contents
Drafts	English Only	CJK (UTF-8)
Reports	English Only	CJK (UTF-8)
Templates (skeletons)	English Only	CJK (UTF-8)
OUTPUT (Job Log)	CJK Supported	Various CJK encodings
Job Scripts (for Edit JCL)	CJK Supported	Various CJK encodings
OS Job Executable	CJK Supported	Various CJK encodings
Doc Path (Formerly Doc Lib)	CJK Supported	Various CJK encodings
Doc File (Formerly Doc Mem)	CJK Supported	Various CJK encodings
%%LIBMEMSYM Variable	CJK Supported	CJK (UTF-8)
XML Files	English Only	CJK (UTF-8)
Command-Line Arguments*	N/A	UNIX: CJK (UTF-8) Windows: CJK (UTF-8)
File Watcher Rule File	English Only	UNIX: CJK (UTF-8) Windows: CJK (UTF-8)
input_file	English Only	UNIX: CJK (UTF-8) Windows: CJK (UTF-8)

CJK Support for Job Definition Attributes

The following table lists parameters that support CJK characters.

Parameter	Sub-parameter
Application*
Command*
Condition Name*
Lock Resources*	Resource Name
Description
Set Variable*	Name
Set Variable*	Value
Do Condition Name*
Do Mail*	cc
Do Mail*	Message
Do Mail*	Subject
Do Mail*	To
Notify*	Destination
Notify*	MSG
handle Output*	Prm
Do OUTPUT*	From Class
Doc File* (formerly called Doc Mem)
Doc Path* (formerly called Doc Lib)
File Name*
From Class*
Sub Application*
Wait for Event*	Name
Job Name*
Mem Lib*
Mem Name*
On Code*
On Statement*
OUTPUT*	Parameter
Event*	Name
Override Path*
Path*
Resource Pool*	Name
Shout*	Message
Shout*	To (Destination)
Step Range*	Name
Order Method
User Daily Name*
Variable (Set Var)*	Name
Variable (Set Var)*	Value

* CJK characters for this parameter are not supported on z/OS.

The following table lists parameters that accept English characters only.

Parameter	Sub-parameter
Component Names
Control-M/Server Name
Host Names
Host Group
Host ID
Run As
Password
Periodic Calendar Values
Rule Based Calendar	Name
User Name

The following are exception alert fields that support CJK special characters:

Message
Note
Key1
Key2
Key3
Key4
Key5

CJK Support for Command-Line Utilities

The following table lists the command-line utilities that support CJK characters. These utilities accept parameters in UTF-8 on UNIX and also UTF-8 on Windows.

Product/Component	Command-Line Utilities
Control-M	ctmdbbck ctmdbcheck ctm_backup_bcp ctm_restore_bcp File Watcher (ctmfw) ctmjsa ctmorder ctmsys ctmudly ctmvar ctmdefine ctmcontb ctmcreate
Agent	ctmorder ctmudly ctmvar ctmdefine ctmcontb ctmcreate
EM Servers	These functions include the following operations of the util utility: Export data from the Control-M/EM database. Import data to the Control-M/EM database. Delete the Control-M/EM database. Clear the Control-M/EM database. Build the Control-M/EM database. Export a specified definition folder. Export a specified definition SMART folder. Import a specified definition folder. Import a specified definition SMART folder.
EM Clients	(Deprecated) XML Utilities: defjob exportdefjob updatedef