Configuring Control-M/Server System Parameters

Determines the number of days to wait before sending a warning that Workload Archiving is not enabled on a PostgreSQL database.

Valid Values: 0 (unlimited) -365.

Default: 7

Defines location where Control-M/Server expects to find all of its executable programs.

Determines the maximum number of worker threads that the tracker can create.

Valid Values:

• Minimum: TRACKER_WORKERS_NUM

• Maximum: 100

Default: 5

Refresh Type: Recycle (by shutting down the Control-M/Server and then re-starting it)

Determines the number of days before a warning is sent for not activating a HOT backup on a PostgreSQL database.

Valid Values: 0 (unlimited)–365

Default: 4

This parameter determines the number of worker threads available for the tracker process at startup.

Valid Values: 1–100

Default: 20

Refresh Type: Recycle (by shutting down the Control-M/Server and then re-starting it)

Determines the handshake protocol for communications between Control-M/Server and Control-M/EM, and between Control-M/Server and Control-M/Agent.

Valid Values:

• INACTIVE: Control-M/Server works in non-SSL mode. If Control-M/Agent is in SSL mode, the server tries to switch that Agent to non-SSL mode.

• DISABLED: Control-M/Server works in non-SSL mode. If Control-M/Agent is in SSL mode, the server does not try to switch that Agent to non-SSL mode.

• ENABLED: Control-M/Server works in SSL mode.

Default: Disabled

How / Where to Set: In the Control-M Main Menu, select Parameter Customization > System Parameters and Shout Destination Tables > System Parameters > Next Page > Secure Sockets Layer. The parameter that is updated is the CTM_CONFIG_AGENT_SSL_ENBL parameter.

Refresh Type: manual

Determines the day on which the work week starts at your site.

NOTE:

Valid Values: 0 (Saturday) through 6 (Friday)

Default: 2 (Monday)

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Determines whether job statistics should be written to the Control-M/Server database.

• Y: tells Control-M to record job statistics.

• N: tells Control-M not to record job statistics.

Default: Y

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Determines which email addresses receive notifications about events.

The e-mails are sent using the SMTP parameters, as described in SMTP Parameters.

Determines the number of seconds for the upgrade or downgrade to complete before a timeout.

Default: 3,600

Determines the number of seconds to wait to retrieve output information from the Control-M/Agent to display in the Control-M/Agent upgrade/downgrade log before a timeout.

Default: 60

Determines the number of seconds to wait for jobs to complete prior to deployment before a timeout occurs. NOTE: This parameter is only relevant for Control/Agents that do not support upgrade with no downtime.

Default: 600

Determines the maximum bandwidth (KB/second) limit to transfer the installation packages from Control-M/Server to Control-M/Agent.

Default: 1,024

Determines the maximum number of upgrade or downgrade processes that can run simultaneously.

Default: 5

Determines the minimum number of MB required in the Control-M/Server computer to perform an upgrade.

Default: 2,048

Determines the number of days that the installation package is saved in the Control-M/Server cache.

Valid Values:

• 0: Never remove

• 1–365

Default: 30

Defines the network location where the Control-M/Agent installation packages are stored on Windows.

You must define this parameter if you want to upgrade Control-M/Agents from a network location, as described in Upgrading Control-M/Agents.

Determines the maximum time to wait for a response from the database server. If the maximum time has passed, and there is no response, it is considered a failure.

Default: 5

Determines the number of consecutive life check requests to the database server without getting a response.

Default: 3

(PostgreSQL only) Determines the number of unsuccessful attempts that Configuration Agent tries to start up the database server.

Default: 20

Determines the number of seconds to wait between sending life check requests to the database server.

Default: 5

(PostgreSQL only) Determines the number of seconds to wait after the Configuration Agent started up the database server.

Default: 10

Determines the maximum number of seconds to wait for a life check response before a timeout.

Default: 5

Determines the number of consecutive failed life check requests between the Configuration Agent and Control-M/Server before the Configuration Agent tries to start it up.

Default: 3

Determines the number of unsuccessful attempts that SU process tries to start up a process and then crashes before shutting down Control-M/Server.

Default: 20

Determines the number of seconds to wait between sending life check requests to the primary Configuration Agent.

Default:15

Determines the number of seconds to wait after the Configuration Agent started up a component.

Default: 10

Determines the hostname used by the Control-M/Agent to communicate with the Control-M/Server.

Control-M/Server can be connected to the Control-M/EM through an IP/specific network and to the Control-M/Agents through a different segment of network using a different IPs to have more secure communication: <Administration IP> to connect to Control-M/EM and <Services IP> to connect to Control-M/Agents.

This parameter is used to separate the listening interface from Control-M/EM and Control-M/Agents.

How / Where to Set:

In the config.dat file of Control-M/Server and the CONFIG.dat file of Control-M/Agent, set the IPV_MODE parameter to DUAL and then restart both Control-M/Server and Control-M/Agent.

Defines the listening port number of the NS process (not to be used for any other purpose in the server computer). Control-M/Server communicates with Control-M/Agent using two TCP/IP ports. CTMS_PORT_NUM specifies the port for data flowing from Control-M/Server to Control-M/Agent. The other port is specified using Server-to-Agent Port Number parameter.

Valid Values: 1,024–65,534

Default: N/A 7,005 (On UNIX, the default value is overridden, using the value given during installation.)

How: ctm_menu > Parameter Customization > Basic Communication and Operational Parameters > Agent to Server Port.

Refresh Type: Recycle

Determines the number of seconds for the Control-M/Server to wait for an Agent to respond to a request (all requests excluding submit, ping and save script requests).

Valid Values: 1–7,200

Default: 3,600

Determines if the current connection to this AGT can be disconnected when MAX_CONCURRENT_SESSIONS is reached.

Valid Values: Y and N

Default: Y

Determines the communication port number between the Control-M/Server Configuration Agents on the primary and secondary host in a High availability environment.

Default: 2,368

How: ctm_menu > Parameter Customization > Basic Communication and Operational Parameters > High Availability Port Number.

Determines the interval (in seconds) between status checks for each Control-M/Agent that communicates with Control-M/Server.

Valid Values: 30–65,534

Default: 7,200 (2 hours)

Determines the protocol used to communicate with the Agent computers. (The protocol specified here must be the same as that specified on the Agent computer).

Valid Values: TCP

Default: TCP It is recommended that you use TCP when there are many jobs running simultaneously reporting to Control-M/Server.

Refresh Type: Recycle

Determines whether communication packets that Control-M/Agent sends to and receives from Control-M/Server are written to a file. If set to 1, separate files are created for each session (job, ping, and so forth). This parameter can only be changed after completing the installation.

Valid Values: 1 (on), 0 (off)

Default: 0 (off)

Determines whether communication packets that Control-M/Agent sends to and receives from Control-M/Server are written to a file with a parsed value (the packets information).

This parameter can only be changed after completing the installation.

Valid Values: 1 (on), 0 (off)

Default: 0 (off)

Defines the Control-M/Server Configuration Agent listening port number.

Valid Values:

• Distributed Control-M/Server: 1,025–32,767

• MVS Control-M/Server: 1,024–65,534

Default: 2,369

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Basic Communication and Operational Parameters > Configuration Agent Port.

Refresh Type: Recycle

Determines the mode of the Control-M/Server Configuration Agent.

Valid Values:

• 0: (OFF_MODE): Disable Configuration Agent process, no communication with CMS is allowed.

• 1: (READ_MODE): Only life check and information requests are honored, any modifying request is rejected.

• 2: (ALL_MODE) Any CMS request is honored.

Default: 2

Refresh Type: Recycle

Determines the Control-M/Server Configuration Agent unavailability threshold. The Control-M/Server Configuration Agent issues the following message when the number of unavailable Agents is equal to or greater than the threshold:

Some of the Control-M/Agents are unavailable.

Valid Values: 1–2^31

Default: 1

Refresh Type: Manual

For Control-M/Agents and remote hosts for which Control-M/Server has not previously identified the operating system and Agent version, defines the frequency, in seconds, with which Control-M/Server will try to retrieve that information so that it is available to the end user via CCM.

Default: 24

Defines the port number that Control-M/Server uses to listen for communication from Control-M/EM. Verify that the port number is not used for any other purpose on the server computer.

Valid Values: 1,025–32,767 inclusive.

Default: N/A

Refresh Type: Recycle

Defines the listening port number of the RT process.

Valid Values: 1,025–32,767

Default: N/A

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Basic Communication and Operational Parameters > IPC Port.

Refresh Type: Recycle

Determines the number of bytes of the receive buffer of the TCP/IP socket connected to the Control-M/EM gateway.

Valid Values:

• -1

• 1,024–10,000,000

Default: -1

Determines the number of bytes of the send buffer of the TCP/IP socket connected to the Control-M/EM gateway.

Valid Values:

• -1

• 1,024–10,000,000

Default: -1

Defines the host interface name of the TCP/IP network interface card on the server computer to use for communication with Control-M/EM.

This name is typically the host name of the server computer. You should modify this parameter only if the server computer contains more than one network interface card (for example, Ethernet and Token-Ring) or use another name for external communication (AWS public name).

Valid Values: host name, or host IP address (for example, 192.123.186.20).

Default: the default host interface name defined in the server computer operating environment.

Defines the port number for the Control-M/Server Configuration Agent.

Valid Values:

• Distributed Control-M/Server: 1,025–32,767

• MVS Control-M/Server: 1,024–65,534

Default: N/A 2,369

Refresh Type: Recycle

Defines the maximum number of concurrent sessions that the NS process will hold.

Once the maximum of the MAX_CONCURRENT_SESSIONS parameter is reached, the session with the maximum idle time will be terminated in order to open a new connection. If this Agent connection is marked as not allowed to be disconnected (see the ALLOW_ AG_DISCONNECTION parameter) then the next one in line will be disconnected.

Valid Values: All integers in the range of 16 to the maximum available according to the operating system.

Default: 256

Defines maximum number of requests (originating from CONTROL-M/EM gateways) that Control-M/Server can queue.

Valid Values: 60–32,000

Default: 60

How / Where to Set:

Refresh Type:

Enables alerts to be sent when variables have not been resolved during job submission. You can set this parameter in the config.dat file, in the following format:

CTM_VARIABLE_SHOUT_ON_ERROR_URGENCY <urgency>

Valid Values:

• N – Do not send alert

• R – Regular (default value)

• U – Urgent

• V – Very urgent

For changes to take effect, restart Control-M/Server or run the following command:

ctmipc -dest ALL -msgid CFG

Defines the communication timeout in seconds.

Valid Values: 10–2^31

Default: 120

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Default Parameters for Communicating with Agent Platforms > Communication Timeout.

Refresh Type: Recycle

Defines the communication retry value.

Valid Values: 1–2^31 (seconds)

Default: 12

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Default Parameters for Communicating with Agent Platforms > Maximum Retries.

Refresh Type: Recycle

Determines the version of the protocol for communication between Control-M/Server and the Agent.

Valid Values: 12–14, where 14 is the most recent protocol version

Default: 11

Determines the number of bytes of the receive buffer of the TCP/IP socket used by the CE process for internal communication.

Valid Values:

• -1

• 1,024–10,000,000

Default: -1

Determines the number of bytes of the send buffer of the TCP/IP socket used by the CE process for internal communication.

Valid Values:

• -1

• 1,024–10,000,000

Default: -1

Determines whether to enable IPV6.

Valid Values:

• IPV4

• DUAL (Enables IPV6)

Default: IPV4

How / Where to Set: In the config.dat file of Control-M/Server and the CONFIG.dat file of Control-M/Agent, set the IPV_MODE parameter to DUAL and then restart both Control-M/Server and Control-M/Agent.

If you want to enable IPV6 before installation, see Setting environment variables in UNIX.

Defines the maximum time in which the NS allows an Agent to be disconnected before it will initiate a session with it (although there's nothing to submit to it). The MAX_DISCONNECT_TIME parameter is relevant only if the ALLOW_COMM_INIT parameter on the Agent is set to NO.

Valid Values: integers in the range 30–86,400 (in seconds)

Default: 300

Used in various ways, for example, the name of the server to be sent to the Agent, for later comparison with the Agent's permitted server list.

Valid Values: 85 characters

Default: dba-tlv-whbdwi

How / Where to Set:

(UNIX) In the Control-M Main Menu, choose Parameter Customization > Basic Communication and Operational Parameters > Local IP host interface name.

Refresh Type: Recycle

Defines an IP address for Server to Agent connections. Update this parameter in the local_config.dat file.

Valid Values: IP address or hostname

Default: hostname

Refresh Type: Recycle

Determines the persistent connection setting. Set the PERSISTENT_CONNECTION parameter to connect to a specific Agent with either a persistent or transient connection.

When Persistent Connection is set to Y (for example, with an Agent version 6.2.01), the NS process creates a persistent connection with the Agent and manages the session with this Agent. If the connection is broken with an Agent or NS is unable to connect with an Agent, the Agent is marked as Unavailable. When the connection with the Agent is resumed, the NS recreates a persistent connection with the Agent and marks the Agent as Available.

Valid Values:

• Y

• N

Default: N for a new Agent installation and N for an Agent that is known to Control-M/Server before upgrading to version 6.2.01 and above.

Defines the time interval (in seconds) between requests from Control-M/Server for status updates from Agent computers that are executing jobs.

Valid Values: 60-65,534

Default: 900

Determines the Server to Agent port number.

Valid Values: N/A 1,024 to 65,534

Defines the length of time to wait (in seconds) between attempts to communicate with an Agent computer whose status is Unavailable.

Valid Values: 30-65,534

Default: 90

Defines the maximum time a session can be in idle before NS terminates it.

Valid Values: integers in the range 30–86,400 (in seconds)

Default: 900

Determines the number of bytes of the send buffer of TCP/IP sockets created by the C processes of Control-M/Server.

Valid Values:

• 0

• 1,024-10,000,000

Default: 0

Determines the number of seconds for the Control-M/Server to wait for an Agent to respond to a submit request before a timeout.

Valid Values: 1–3,600

Default: 600

Determines messages with a high priority sent from an Agent assigned Unavailable status. Urgent message are sent with a special indication so that the recipient of the message is aware of the urgency.

Valid Values:

• R

• U

• V

Default: R

Determines which Hosts that are not defined in the Control-M/Server are allowed to initiate communication with it.

Valid Values:

• N

• Y

Default: Y

Defines a space-separated list of error message numbers that, when written to the IOALOG, is echoed as alerts to Control-M/EM.

Use the following format for message ID entries:

<message-id>[:<urgency>]

Urgency values:

• R: Regular (default)

• U: Urgent

• V: Very Urgent

Default:

ALERT_ON_MESSAGES 5141 5211 5745 5273 5274 5275 5217 5135 5220 0008 0012 0014 0016 0018 5126 5127 5128 5129 5172 5173 5762 5763

To disable: ALERT_ON_MESSAGES 0

How/where to set: Set this parameter through the config.dat file of Control-M/Server. For changes to take effect, restart Control-M/Server or run the following command:

ctmipc -dest ALL -msgid CFG

Determines whether to send Control-M/EM alerts when shouts that are issued by background activities fail.

Valid Values:

• Y: An alert is sent to Control-M/EM in the event of shout failure. The alert message is SHOUT TO <shout destination> FAILED.

• N: No alert is sent to Control-M/EM in the event of shout failure.

Default: Y

How/where to set: Set this parameter through the config.dat file of Control-M/Server. For changes to take effect, restart Control-M/Server or run the following command:

ctmipc -dest ALL -msgid CFG

When there is no current Control-M/EM session, Control-M accumulates database updates before downloading them to Control-M/EM. CD_MAX_DBU determines the maximum number of updates to accumulate before requesting a download.

Valid Values: 100–2^31

Default: 1,000

How/where to set: In the Control-M Main Menu, choose Parameter Customization > Advanced Communication and Operational Parameters > Maximum Job State Changes.

Refresh Type: Manual

Determines whether to ignore the prerequisite conditions of a SMART folder entity, when the predecessor jobs that normally set these conditions are not scheduled.

Valid Values:

• Y: Ignore relevant prerequisite conditions.

• N: Do not ignore relevant prerequisite conditions.

Default: N

Refresh Type: Recycle

For jobs in the SMART Folder, determines conditions of which unscheduled predecessor jobs to ignore.

Valid Values:

• AJF: Ignore predecessor jobs in the Active Jobs level. When selected, jobs in the SMART Folder ignore conditions set by jobs in Active Jobs that are not scheduled.

• GROUP: Ignore predecessor jobs in the group level. When selected, jobs in the SMART Folder ignore conditions set by jobs in the SMART Folder that are not scheduled.

Default: GROUP

Refresh Type: Manual

Enables user-defined variables to contain the - (hyphen) character.

Valid Values:

• N

• Y

Default: N

Refresh Type: Manual

Determines if AutoEdit variable %%MEMLIB overrides the MEMLIB value for all jobs in a folder with a command such as:

If you use the same command for a specific jobname, this parameter is ignored.

Valid Values: Y, N

Default: N

Refresh Type: Manual

Controls creation of dummy jobs that run in place of unscheduled prerequisite jobs.

Valid Values:

• Y: A dummy job waits for the prerequisite conditions expected by the job it is replacing, and performs the post processing of the job. When a SMART Folder is ordered, jobs in the folder that should not be ordered at this time are ordered as DUMMY jobs. This functionality is useful for data centers that require identical job flow regardless of whether certain jobs in a folder are ordered for a specific instance of the folder.

• N: Out conditions of the jobs that were not ordered are ignored by the ordered jobs in the SMART Folder.

Default: N

Refresh Type: Manual

Determines if SMART Folder or Sub-folder conditions should be checked for each job in a SMART Folder or Sub-folder after the SMART Folder or Sub-folder conditions have been satisfied.

Valid Values:

• N: SMART folder or sub-folder conditions are ignored when ordering specific jobs in a folder.

• Y: SMART folder or sub-folder conditions are checked for each job in the folder (in addition to conditions specified for the job).

Default: N

Refresh Type: Recycle

The default action of the utility is to order, not force, jobs in Active Jobs. This action can be modified by adding keyword Force to the command that invokes the utility. To change the default to force, set this parameter to Y.

Valid Values:

• Y

• N

Default: N

Refresh Type: Automatic

Determines the number of seconds to wait before releasing a lock on all folders in a user daily.

Default: 900

Refresh Type: Manual (ctmipc -dest all -msgid CFG)

Determines when Cyclic jobs/SMART Folders that have previously executed at least once, are removed from Active Jobs by the New Day procedure.

Valid Values:

• KEEP: Each job is removed when MAXWAIT days have passed regardless of whether it ended OK.

• NOT_KEEP: Each job (non-cyclic and cyclic) is removed from Active Jobs at the next run of the New Day procedure. Cyclic jobs/SMART Folders are not removed if they are executing when the New Day procedure begins. Instead, they are removed at the run of the following New Day procedure.

Default: KEEP

Refresh Type: Recycle

If a Cyclic job/SMART Folder ends NOTOK and this parameter is set to OK, the Cyclic job/SMART Folder will be rerun. If set to NOTOK, the Cyclic job/SMART Folder will not be rerun.

Valid Values:

• OK

• Not OK

Default: OK

Refresh Type: Manual

Determines whether a Control-M/Agent is automatically discovered using an unfamiliar host.

Valid Values:

• Y

• N

Default: Y

Determines the maximum number of jobs that can execute concurrently.

Default: 20,000

Determines the type of Alert message to send to Control-M/EM when a job is not run due to scheduling criteria.

Valid Values:

• 0: One General Alert per User Daily: ONE OR MORE JOBS IN DAILY <daily_name> DID NOT RUN.

• 1: One Alert message per job: DAILY <daily_name> FAILED TO RUN JOBNAME <jobname>.

• 2: Do not issue Alert messages

Default: 0

Refresh Type: Recycle

Determines whether negative values take precedence over positive values in Week or Day parameters when defining a job schedule.

Valid Values:

• 0

• 1

Default: 1

When DAYS is >n, or <n, should we order the job on the next (>n), or previous (<n) working day, if n is a non-existing day for the specific month? If the parameter is set to Y, then we should order the job.

Valid Values:

• N

• Y

Default: N

Refresh Type: Manual

Determines the maximum number of seconds to wait for a shout to program to complete before continuing to process the job.

Valid Values: 0 (unlimited)–2,147,483,648

Default: 20

Determines the error code returned by ctmudly utility if one or more jobs in a folder are not ordered by a User Daily job (due to scheduling criteria or security settings).

Valid Values:

• 0: User Daily job ends with an exit code of 0 even if not all jobs are ordered.

• 1: User Daily job ends with an exit code of 14 if not all jobs are ordered.

Default: 0

Refresh Type: Automatic

Determines the number of milliseconds to wait before a warning is issued stating that that DNS is performing too slow.

Default: 3,000

To disable, set to 0.

Determines the number of milliseconds to wait before a warning is issued stating that the disk is performing too slow.

Default: 180

To disable, set to 0.

Determines the number of milliseconds to wait before a warning is issued stating that the connection between Control-M/Server and Control-M/Agent is too slow.

Default: 3,000

To disable, set to 0.

Determines the logical name of the Shout destination for critical Alert messages.

Valid Values:

• EM: Control-M/EM GUI

• IOALOG: Control-M IOALOG files

• CONSOLE: Server console

Default: EM

Refresh Type: Manual

Determines if job run time is adjusted to time zone.

Valid Values:

• N – the Next Run time of a job is in local computer time, not adjusted to time zone.

• Y – the Next Run time of a job is adjusted to the correct time zone.

Default: N

Refresh Type: Manual

If this parameter is set, critical alerts are sent to the console of the server in addition to being sent as Shout messages to Control-M/EM.

Valid Values:

• YES

• NO

Default: NO

Refresh Type: Recycle

Maximum OUTPUT size that can be viewed by the output command from Control-M/Server and Control-M/EM. The value is set in Kilobytes. If a OUTPUT file exceeds the value specified by the OUTPUT_LIMIT_SIZE configuration parameter, it cannot be viewed from Control-M/Server or Control-M/EM, and the following message is displayed:

OUTPUT FILE EXCEEDED LIMIT SIZE (CAN BE VIEWED FROM FILE SYSTEM)

Valid Values: 0–2^31

Default: 0 (unlimited)

Refresh Type: Manual

Defines the maximum number of characters for a OUTPUT file line.

Valid Values: 80–132 characters.

Default: 80

Refresh Type: Manual

Defines the number of generations of diagnostic log information to keep for a process or a thread.

Valid Values:

• -1 (no limit to the number of files)

• 1–2^31

Default: 20 (In the shipped config.dat, the default value is overridden by 10).

Refresh Type: Recycle

Defines the maximum size (MB) of diagnostic log files for a process or a thread.

Valid Values:

• -1 (no filesize limit)

• 1–2^31

Default: 15 (In the shipped config.dat, the default value is overridden by 10).

Refresh Type: Recycle

Defines the number of days that job OUTPUT files are retained for jobs executed by Agent computers.

After this period, the New Day procedure deletes all job OUTPUT files.

This parameter also affects the number of days that old nets are saved. To view OUTPUT files of jobs in old nets, in some cases OUTPUT files must be saved for an extra calendar day.

Valid Values: Any number greater than 0.

Default: 1

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Defines the maximum number of days that entries are retained in the Control-M log before the New Day cleanup procedure deletes them.

Valid Values: Any number greater than 0.

Default: 2

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Determines whether the New Day procedure sends a request to Control-M/Agents to remove OUTPUT files and exit status files that are no longer needed.

Valid Values:

• Y: The New Day procedure sends a request to Control-M/Agents to remove OUTPUT files and exit status files that are no longer needed.

• N : The New Day procedure does not send a request to the Control-M/Agents to remove OUTPUT files and exit status files that are no longer needed.

Default: Y

Refresh Type: Recycle

Defines the timeout value for long New Day database transactions, in seconds.

Valid Values: 300–3,600

Default: 300

Refresh Type: Recycle

Defines Start-of-day time that Control-M uses.

This time is when the Control-M date (Odate) changes and the New Day procedure runs.

Valid Values: either of the following formats (where hh indicates hours and mm indicates minutes):

• +hhmm: changes the Control-M date at the specified time after midnight.

• -hhmm: changes the Control-M date at the specified time before midnight.

These values reflect 24-hour time. For example, 22:00 is equivalent to 10 P.M.

Default: +0700

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Defines the number of threads that would handle the download process in case parallel download is enabled (NEWDAY_MODE = 1).

Valid Values: 1–100

Default: 3

Determines the number of jobs that are cached in memory to speed up the download. Increasing this number causes the product to consume more memory.

Valid Values: 100-100,000

Default: 5000

Determines whether to perform a Full backup when clean AJF is enabled.

Valid Values:

• Y–Enabled.

• N–Disabled.

Default: Y

Determines whether the New Day procedure should ignore prerequisite conditions if their reference date (day and month) matches the Control-M date + 1.

How / Where to Set: Use the ctmsys utility to change the parameter value.

Refresh Type: Automatic

Valid Values: Y or N

Default: N

Determines whether New Day performance enhancements are enabled.

Valid Values:

• 0: Disabled

• 1:Enabled

Default: 1

Determines whether the statistics cleanup action is executed during the New Day procedure.

Valid Values:

• Y: The statistics cleanup action is executed during New Day procedure.

• N: The statistics cleanup action is not executed during New Day procedure.

Note: You can speed up the New Day procedure by specifying N for this parameter and running ctmruninf -PURGE.

Default: Y

Refresh Type: Recycle

Defines the number of seconds preceding launch of the NewDay procedure during which jobs are not submitted.

Valid Values: 0–3,600

Default: 2

Refresh Type: Manual

Defines the number of threads that would handle the SYSTEM user daily when parallel system daily is enabled (NEWDAY_MODE = 1).

Valid Values: 1–100

Default: 4

Determines whether Control-M/EM users are authenticated against Control-M/Server Security definitions. When set to Y, EM users requests would not be checked against Control-M/Server Security definition. Only the Control-M/EM Authorization definition would be checked.

Valid Values:

Y: Not authenticated against Control-M/Server Security definitions.

N: Authenticated against Control-M/Server Security definitions.

Default: N

Determines whether Control-M operates with a restricted or unrestricted level of security.

Valued Values:

• Y (restricted) means a user who is not defined in the Control-M security database does not have any application authorizations.

• N (unrestricted) means a user who is not defined in the Control-M security database is regarded as having all application authorizations.

Default: N

Refresh Type: Automatic

Determines whether to purge job statistics also during the day.

Valid Values:

• Y

• N

Default: Y

Affects the statistics cleanup algorithm that is performed during New Day when the RUNINF_PURGE_MODE is set to 0 (default). If the number of records to be deleted from the table is less than the value of this parameter, then records are deleted directly from the statistics table. Otherwise a temporary table is used to delete the records.

Valid Values: 0–65,000

Default: 2,000

Refresh Type: Recycle

Affects the statistics cleanup algorithm that is performed during New Day when the RUNINF_PURGE_MODE is set to 0. If the ratio between the number of records to be deleted and the number of records in the table is less than the value of this parameter, then records are deleted directly from the statistics table. Otherwise a temporary table is used to delete the records.

Valid Values: Decimal fraction between 0–1.

Default: 0.33

Refresh Type: Recycle

Defines the number of Run Information records to keep for a given MemName/MemLib/HostID. If RUNINF_PURGE_MODE is 0, the New Day Procedure deletes all Run Information records for each unique name except the last n records, where n is the value of this parameter.

Valid Values: 1–2^31

Default: 20

Refresh Type: Recycle

Valid Values:

• 0: Performs -PURGE cleanup. Statistics records per job are kept according to the specified Statistics Mode (either MEMNAME or JOBNAME). Default: 20 records of each MEMNAME or JOBNAME are kept. If the RUNINF_PURGE_LIMIT in the config.dat is specified, the number of records that are kept is determined by this parameter.

• 1: Performs -DELETE cleanup. Only the amount of days that are specified are kept. Default: The number of days kept is specified by the How Many Days to Retain ioalog parameter.

If the RUNINF_PURGE_LIMIT in the config.dat is specified, the number of days that are kept is determined by this parameter.

Default: 0

Refresh Type: Recycle

Determines whether Control-M/Server collects job statistics.

Valid Values:

• Y

• N

Default: Y

See Also: ctmruninf, ctmstats

Determines the mode used to collect summary statistics by ctmjsa. In addition it is used for actions on statistics such as average and deletion.

Valid Values:

• JOBNAME: compiles statistics for each Control-M Job Name/Table and Host ID where the job was submitted.

• FILENAME: compiles statistics for each Control-M File Name/Mem Name/Mem Lib and Host ID.

Default: FILENAME

Refresh Type: Recycle

See Also: ctmruninf, ctmstats

Determines whether the OUTPUT of a job can be attached to e-mail messages.

Valid Values:

• N: No. When specified, the OUTPUT of a job is not attached. This setting overrides any specification made elsewhere.

• A: Attachment. When specified, the OUTPUT of a job is attached. This setting overrides any specification made elsewhere.

Default: N

Refresh Type: Manual

Determines the maximum size of the attachment OUTPUT file in kilobytes.

You can specify the value 0 for unlimited size.

Valid Values: 0–2^31

Default: 5,120KB (5MB)

Refresh Type: Manual

When sending a mail request—with a OUTPUT file attached—to the SMTP server, determines the maximum time to wait.

Valid Values: 1–300 (seconds)

Default: 30 (seconds)

Refresh Type: Manual

Determines if the Control-M/Server Shout by orderno prefix must be added to the subject of the e-mail message.

Valid Values:

• Y

• N

Default: Y

Refresh Type: Manual

Determines the maximum time (in seconds) to send the mail request to the SMTP server when no OUTPUT is attached.

Valid Values: 1–30

Default: 10

Refresh Type: Manual

Defines the number of attempts to get an Agent's network information.

Valid Values: 1-2,048

Default: 5

Defines the name of the SMTP server relay.

Valid Values:

0–50 characters

Default: "" (During installation, this is overridden by a null value.)

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Simple Mail Transfer Protocol Parameters > SMTP Server (Relay) Name.

To disable, use a dummy value.

Refresh Type: Automatic

Defines the e-mail address used by Control-M/Server.

Valid Values: 0–99 characters.

Default: "" (During installation, this is overridden by Control@M.)

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Simple Mail Transfer Protocol Parameters > Sender Email.

Refresh Type: Automatic

Defines the port number to which the service is assigned.

Valid Values: 1–65536

Default: 25

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Simple Mail Transfer Protocol Parameters > Port Number.

Refresh Type: Automatic

Defines the regular text name used to identify the sender.

Valid Values: 0–99 characters.

Default: Control-M/Server (During installation, this is overridden by a null value).

How / Where to Set: In the Control-M Main Menu, choose Parameter Customization > Simple Mail Transfer Protocol Parameters > Sender Friendly Name.

Refresh Type: Automatic

Determines whether Control-M user exits and Watchdog process exits are enabled.

Valid Values:

• Y

• N

Default: Y

Refresh Type: Recycle

Determines whether the associated UExxx user exit is enabled.

Valid Values:

• Y

• N

Default: N

Defines the name of the UExxx user exit script. These scripts must reside in the ~<controlm_owner>/ctm_server/ue_exit directory.

Valid Values: 1,024 characters

Default:

• UE101 Job Ordering User Exit: ctm_exit101.sh

• UE102 Job Submission User Exit: ctm_exit102.sh

• UE103 Before New Day Procedure User Exit: ctm_exit103.sh

• UE104 After New Day Procedure User Exit: ctm_exit104.sh

• UE105 Before User Daily User Exit: Ctm_exit105.sh

• UE106 After User Daily User Exit : Ctm_exit106.sh

Refresh Type:

• UE101 Job Ordering User Exit: Manual

• UE102 Job Submission User Exit: Manual

• UE103 Before New Day Procedure User Exit: Recycle

• UE104 After New Day Procedure User Exit: Recycle

• UE105 Before User Daily User Exit: Manual

• UE106 After User Daily User Exit : Manual

Defines the time to wait for a user exit script to run before it is terminated.

For UNIX: Time is measured in units of seconds.

For Windows: Time is measured in units of milliseconds.

Valid Values: 20–2^31

Default: 20

Refresh Type:

• UE101 Job Ordering User Exit: Manual

• UE102 Job Submission User Exit: Manual

• UE103 Before New Day Procedure User Exit: Recycle

• UE104 After New Day Procedure User Exit: Recycle

• UE105 Before User Daily User Exit: Manual

• UE106 After User Daily User Exit : Manual

Defines the total number of Control-M/Server system exits to run.

Valid Values: Any whole number.

Default: 3 (set to 2 during installation)

During New Day or Download of Active Jobs to Control-M/EM, the ctmcreate, ctmudly, ctmorder utilities and ctmac and CS processes are suspended (when trying to order). They stay suspended until the Download or New Day is completed. This parameter Determines the maximum number of times to wait, where each time is configured, in seconds, by the parameter CTM_SUS_SLEEP_TIME.

Valid Values: 1–120 (times)

Default: 30

Refresh Type: Manual

During New Day or Download of Active Jobs to Control-M/EM, the ctmcreate, ctmudly, and ctmorder utilities and the ctmac and CS processes are suspended (when trying to order). They stay suspended until the Download or New Day is complete. This parameter Determines the specified number of seconds to wait before initiating a download or the New Day procedure.

See also CTM_SLP_SUSPEND.

Valid Values: 1–180 (seconds)

Default: 60 (seconds)

Refresh Type: Manual

Determines the number of retries to run the ctmudchk utility if ctmudly is ordering the user daily.

Default: 10

Determines whether the Heartbeat monitor operates in active or passive mode.

Valid Values:

• Y (for active) or

• N (for passive)

Default: Y

Refresh Type: Recycle

Defines time (in seconds) between heartbeat checks.

Valid Values: 1–2^31 (integer)

Default: 60

Refresh Type: Recycle

Defines time (in seconds) to wait for a confirmation from Control-M/EM. If confirmation does not arrive, a timeout is generated and the connection is severed.

Valid Values: any integer

Default: 1800

Refresh Type: Recycle

Defines message to be sent in response to successful heartbeat checks.

Valid Values: 1,024 characters

Default: N/A

Refresh Type: Recycle

Defines the host name or IP address of the computer running CONTROL-O/Server. If this parameter is specified, the Watchdog process sends all error messages to the CONTROL-O/Server Central Message window.

Valid Values: Up to 255 characters.

Refresh Type: Recycle

Defines the maximum time (in second) to send messages to CONTROL-O/Server before terminating the communication.

Valid Values: 1–10

Default: 10 seconds

How / Where to Set:

Refresh Type: Recycle

Defines the full path name of a user defined script called by the Watchdog process as an error handler. The error messages are included as arguments to the script.

Valid Values: 1,024 characters

Default: N/A (In the shipped config.dat, the default is overridden by ./scripts/UE_handler).

Refresh Type: Recycle

Defines the maximum time for the Watchdog facility to wait for the user-defined script to run.

Valid Values: 5–2^31

Default: 10 (In the shipped config.dat, this is overridden by the value 10).

Refresh Type: Recycle

The Watchdog process checks Control-M/Server processes by sending a message. If this parameter is set to 5, the Watchdog process sends a message to each of the primary Control-M/Server processes every 5th interval and awaits a response.

Valid Values: 1–2^31

Default: 6 (In the shipped config.dat, this is overridden by the value 1).

Refresh Type: Recycle

Defines the maximum time (in seconds) to wait for a response from each of the Control-M/Server processes, after issuing a Heartbeat check, before sending a message to the error handlers.

Valid Values: 1–2^31

Default: 360

Refresh Type: Recycle

Defines parameters to be passed to the exit script. Arguments must start with a ‘-’ sign. Values separated by either a space or a ‘-’ sign must be enclosed in double quotation. Mandatory.

Valid Values: 1,024 characters

Default: ""

In the shipped config.dat on UNIX, the default values are overridden as follows:

• wd_ctmexit_1: -LIMIT "10 M" -PATH ctm_em

• wd_ctmexit_2: -LIMIT "90 M"

In the shipped config.dat on Windows, the default values are overridden as follows:

• wd_ctmexit_1: -LIMIT 10M -PATH C:\

• wd_ctmexit_2: -LIMIT 90

Refresh Type: Recycle

Defines error message string to be passed to the error handler(s) if the utility returns a "failed" status. Optional.

Valid Values: 1,024 characters

Default: "" (In the shipped config.dat, for wd_ctmexit_1 and wd_ctmexit_2, the default is overridden by "Low on database space.")

Refresh Type: Recycle

Defines the number of basic time interval units that should pass before reinvoking the exit script. The basic time interval unit is defined in parameter WD_INTERVAL.

For example, if the value of this parameter is 20, and the basic time interval unit (as defined in parameter WD_INTERVAL) is 5 minutes, the exit script will be invoked every 100 minutes (20 x 5 minutes).

Valid Values: 1–2^31

Default: 5 (In the shipped config.dat, this is overridden by the value 20.)

Refresh Type: Recycle

Determines whether (Y) or not (N) to run the utility when Control-M/Server is running. A Y must be specified for either this parameter or for parameter WD_CTMEXIT_#_SUSPEND _STATE for the utility to be run.

Valid Values:

• Y

• N

Default: N (In the shipped config.dat, this is overridden by the value Y.)

Refresh Type: Recycle

Defines the relative path of the script or binary from the ~controlm\ctm_server\exe_<computer> directory.

Valid Values: 1,024 characters

Default: "" (In the shipped config.dat, for both wd_ctmexit_1 and wd_ctmexit_2, this is overridden by the value CTMDISKSPACE).

Refresh Type: Recycle

Determines whether (Y) or not (N) to run the utility in Suspend mode (that is, during New Day procedure or download, when the database inaccessible). A Y must be specified for either this parameter or for parameter WD_CTMEXIT_#_RUN _STATE for the utility to be run.

Valid Values:

• Y

• N

Default: N

Refresh Type: Recycle

Defines parameters to be passed to the exit script. Arguments must start with a ‘-’ sign. Values separated by either a space or a ‘-’ sign must be enclosed in double quotation. Mandatory.

Valid Values: 1024 characters

Default: ""

Refresh Type: Recycle

Defines the error message string to be passed to the error handler(s) if the check returns a "failed" status. Optional.

Valid Values: 1024 characters

Default: ""

Refresh Type: Recycle

Defines the umber of basic time interval units that should pass before reinvoking the exit script. The basic time interval unit is defined in parameter WD_INTERVAL.

For example, if the value of this parameter is 2, and the basic time interval unit (as defined in parameter WD_INTERVAL) is 5 minutes, the exit script will be invoked every 10 minutes (2 x 5 minutes).

Valid Values: 1–2^31

Default: 5

Refresh Type: Recycle

Determines whether (Y) or not (N) to run the utility when Control-M/Server is running. A Y must be specified for either this parameter or for parameter WD_USEREXIT_#_SUSPEND _STATE for the utility to be run.

Valid Values:

• Y

• N

Default: N

Refresh Type: Recycle

Defines the relative path of the script or binary from the ~controlm\ctm_server\exe_<computer> directory.

Valid Values: 1024 characters

Default: ""

Refresh Type: Recycle

Determines whether (Y) or not (N) to run the script in Suspend mode (that is, during New Day procedure or download, when the database inaccessible). This parameter or WD_CTMEXIT_#_RUN _STATE must be set to Y for the script to be run.

Valid Values:

• Y

• N

Default: N

Refresh Type: Recycle