ENQ Information Screen

The ENQ Information screen displays the selected enqueue information.

Up and down scrolling conventions are supported.

Two predefined display types (described in the following paragraphs) are available for the ENQ Information screen.

Changing Display Types

While in the ENQ Information screen, the display type can be changed using the DISPLAY command. The format of the command is DISPLAY x. In this command, x is the identifying letter for the desired type. DISPLAY can be abbreviated to DI.

Note: For a list of display types, enter DISPLAY ? to show the Display Options window. To select a display type in the window, type S (Select) in the Option field next to the ID. To exit the window without selecting a display type, press PF03/PF15 (END).

Example

DI A displays the All Fields display type.

Valid predefined display types are

D — Default display type
A — All Fields display type

Display Type D (Default)

Figure 55 ENQINFO Option Display Type D (Default)

------< D >------- CONTROL-O - ENQ Information - Option=S ---------------(OA)

COMMAND ===> SCROLL===> CRSR

O JOBNAME STA TYP SCOPE QNAME RNAME

M56FCMP O E SYSTEM SYSDSN CTW.TEST.FD1211.SRC

M56FCMP O E SYSTEM SYSDSN CTDW.WORKD.PRMUSR

SMS O S SYSTEM SYSDSN SYS1.DFSMS.ACDS

W3PGATE O S SYSTEM SYSDSN IOAP.TEST.NSN

I4ZSMON O E SYSTEMS IOAZ410 DEVICE.460

M06C O S SYSTEM SYSDSN CTDW.WORKD.ATF

M56FCMP O E SYSTEM SYSDSN M31.UNDEL100.ASM

M4WTROLM O S SYSTEM SYSDSN CTMW.WORKD.CKP

M06C O S SYSTEM SYSDSN CTMW.WORKD.CKP

M56FCMP O E SYSTEM SYSDSN CTT.TLMSAG.EARL

EDDTROLD O S SYSTEM SYSDSN EDD.TEST.COM

EDDPRINT O S SYSTEM SYSDSN EDD.TEST.COM

LLA O S SYSTEM SYSDSN SYS2.LINKLIB

M06C O S SYSTEM SYSDSN IOAW.WORKI.MSG

M56FCMP O E SYSTEM SYSDSN M54.VSAM.FILE1

M56FCMP O E SYSTEM SYSDSN CTOW.WORKO.GLB.CPUESA1

M00 O S SYSTEM SYSDSN SYS2.EXEC

M42B O S SYSTEM SYSDSN SYS2.EXEC

M80 O S SYSTEM SYSDSN SYS2.EXEC

N38 O S SYSTEM SYSDSN SYS2.EXEC

CMDS: SHPF, REFRESH 15.52.05

Fields in the Default (D) Display Type

The information shown in Table 65 is displayed.

Table 65 Fields of the ENQ Information Screen Display Type D (Default)

Field	Description
<D>	Indicates the Default display type.
O (OPTION)	For future use.
JOBNAME	Name of the job that issued the ENQ.
STATUS	Status of the job. Valid values are: O — The job owns the resource. W — The job is waiting for the resource. An R (RESERVE) character appearing next to the status indicates a RESERVE condition on the disk.
TYPE	Resource type. Valid values are: E — Exclusive S — Shared
SCOPE	Scope of the ENQ entry. Mandatory. Valid values are: STEPS — STEP level SYSTEM — SYSTEM level SYSTEMS — SYSTEMS level ALL — ENQ entries of all three levels above are selected. Default.
QNAME	Resource major name.
RENAME	First 44 characters of the resource name.

Display Type A (All Fields)

Figure 56 shows an example of the All Fields display type for the ENQ Information screen. This display type is requested by typing the DISPLAY A command (abbreviated DI A) in the COMMAND field of the screen.

Figure 56 Example of the ENQ Information All Fields Display Type (A)

------< A >------- CONTROL-O - ENQ Information - Option=S ---------------(OA)

COMMAND ===> SCROLL===> CRSR

O JOBNAME QNAME RNAME

M19A SPFEDIT M19A.ISPF.ISPPROF ISREDRT

STATUS O ASID 0194 TYPE E SCOPE SYSTEMS

RANGE L SYSNAME ESA1 WAIT TIME 00000000

HELD BY

M19A SPFEDIT M19A.ISPF.ISPPROF ISREDIT

STATUS O ASID 0194 TYPE E SCOPE SYSTEMS

RANGE L SYSNAME ESA1 WAIT TIME 00000000

HELD BY

M19 SPFEDIT CTO.WORK.SRC CTOTAOP

STATUS O ASID 0072 TYPE E SCOPE SYSTEMS

RANGE L SYSNAME ESA1 WAIT TIME 00000000

HELD BY

M19 SPFEDIT CTO.WORK.SRC CTOTCSE

STATUS O ASID 0072 TYPE E SCOPE SYSTEMS

RANGE L SYSNAME ESA1 WAIT TIME 00000000

HELD BY

CMDS: SHPF, REFRESH 15.55.58

Fields in the All Fields (A) Display Type

The information shown in Table 66 is displayed.

Table 66 Fields of the ENQ Information Screen Display Type A (All Fields)

Field	Description
<A>	Indicates the All Fields display type.
O (OPTION)	For future use.
JOBNAME	Name of the job that issued the ENQ.
QNAME	Resource major name.
RNAME	First 44 characters of the resource name.
STATUS	Status of the job. Valid values are: O — Job owns the resource W — Job is waiting for the resource An R (RESERVE) character appearing next to the status indicates a RESERVE condition on the disk.
ASID	Address space ID of the job that issued the ENQ.
TYPE	Resource type. Valid values are: E — Exclusive S — Shared
SCOPE	Scope of the ENQ entry. Mandatory. Valid values are: STEP — STEP level SYSTEM — SYSTEM level SYSTEMS — SYSTEMS level ALL — ENQ entries of all three levels above are selected. Default.
RANGE	Range of the ENQ entry. Valid values are: L — Local request G — Global request
SYSNAME	Name of the system associated with the ENQ entry.
WAIT TIME	Time, in seconds, that the job has been waiting for a resource, from first invocation of the ENQ Information screen to its most recent refresh. Exiting and reentering the screen resets this field.
HELD BY	Names of up to six jobs which own the resource for which the job is waiting.

Commands of the ENQ Information Screen

Table 67 Commands of the ENQ Information Screen

Command	Description
SHPF	The SHPF command shows the current PFKey assignments.
REFRESH	The REFRESH command (PF04/PF16) refreshes the screen. In addition to providing new ENQ information, this command is very useful because it allows display of job waiting time, calculated as a time difference between the current refresh and the first invocation of the ENQ Information screen.
AUTO	The AUTO command periodically refreshes the screen automatically after a specified interval. For more information, see AutoRefresh Mode.

Parent Topic

The ENQINFO Option — Enqueue Information