Control-M/Server Installation

If you have additional load balancing and geo-redundancy requirements, you can install multiple instances of Control-M/Server.

Before you install Control-M/Server, verify the requirements, as described in Control-M/Server System Requirements.

If you are installing Control-M/Server on UNIX, complete the pre-installation procedures, as described in Control-M/Server Pre-Installation Procedures on UNIX and the post installation procedures, as described in Control-M/Server post installation on UNIX.

You can install Control-M/Server with one of the following options:

Default: Installs Control-M/Server with a dedicated PostgreSQL database server, default database name, default username and default ports.
Custom: Enables you to select a database server, database name, username and ports.

The Control-M/Server installation includes the installation of a Control-M/Agent, which is critical to the functionality of Control-M/Server. To avoid potential corruption to the product, do not uninstall, disable, or delete the Control-M/Agent.

If you are installing Control-M/Server with a PostgreSQL database on the same computer where Control-M/EM with a PostrgreSQL database was installed, you must use a different port for the second database instance.

The following procedures describe how to install Control-M /Server on UNIX and Windows via an interactive or automatic installation:

Installing Control-M/Server on UNIX
Installing Control-M/Server on Windows

Control-M/Server System Requirements

Before you install Control-M/Server, verify that your operating system, processor, and database server are supported and have the correct amount of memory and diskspace. For a full list of requirements, see the Control-M 9.0.21.100 Release Notes.

Verify that your system meets one of the following requirements:

Control-M/Server UNIX System Requirements
Control-M/Server Windows System Requirements

The number of processes limit must be equal to or greater than the number of expected parallel running jobs.

Control-M/Server UNIX System Requirements

The following table lists the prerequisite requirements for a UNIX platform.

These values represent the minimum requirements for an entry level deployment. For higher capacity workloads, add resources.

Resource	Specification	Requirement
Compatible Processors	AIX	IBM RISC System/6000 Bash Shell
Compatible Processors	Linux	x86_64
Memory	N/A	12 GB
Disk Space BMC Software recommends that you reserve 1.5 times the amount of RAM in the system for swap space.	N/A	40 GB Upgrade: 7 GB If you are installing Control-M with a remote database server, you must have 5 GB free on the database server.
CPU	4 vCPU	100 SPEC rating (2006_int_rate)

Control-M/Server Windows System Requirements

The following table lists the prerequisite requirements for a Windows platform.

These values represent the minimum requirements for an entry level deployment. For higher capacity workloads, add resources.

Resource	Requirement
CPU	4 vCPU 100 SPEC rating (2006_int_rate)
Compatible Processors	x86_64 processors: Intel Xeon 64 bit AMD Opteron
Display	16-bit (65,536) colors or higher
Memory	12 GB
Disk Space BMC Software recommends that you reserve 1.5 times the amount of RAM in the system for swap space.	40 GB Upgrade: 7 GB If you are installing Control-M with a remote database server, you must have 5 GB free on the database server.

The <install folder> must have Read, List Folder Contents, Write, and Read & Execute permissions assigned to the Users group.

Control-M/Server Pre-Installation Procedures on UNIX

Before you install Control-M/Server, you need to complete the following procedures:

Configuring a User Account on UNIX: Describes how to configure specific parameters for Control-M/Server.
Setting Environment Variables in UNIX: Describes how to set environment variables in UNIX, which enables you to see messages from the console.
Setting the Java Environment Variable: Describes how to set the Java environment variable, which points to an external Java installation.
Verifying Operating System Levels and Patches: Describes how to verify operating system level and patches with Control-M/Server requirements.
PostgreSQL UNIX Kernel Parameters: Describes how to modify AIX and Linux system parameters, which enables you to allocate resources for Control-M components.

Installing Control-M/Server on UNIX

This procedure describes how to install Control-M/Server on UNIX. You can install with the default settings, or choose the custom installation to select the database server, database names, usernames, hostnames, and port settings. If you want to install multiple instances of Control-M/Server on several computers using the same configuration, use the automatic installation, as described in this procedure.

The default installation is interactive and uses a GUI display. XServer must be running and configured using the DISPLAY environment variable. If you do not have XServer available, BMC recommends that you continue with the console installation or perform an automatic installation.

Before You Begin

Ensure that you have met the following requirements:

Verify that your operating system and database software is compatible with the current version of Control-M/Server, as described in Control-M/Server UNIX System Requirements.
Successful completion of Control-M/Server Pre-Installation Procedures on UNIX.
Verify that you have met Java requirements, as described in Control-M External Java Installation.
If you are installing on cluster environment, see Control-M/Server UNIX Cluster Configuration.
If you are running the Kafka service, a bash shell must be installed before you install Control-M/Server.
If you are using Red Hat Linux 6, BMC recommends that you define maxproc parameter to at least 4,096 before installing.

Begin

Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory.
Set your DISPLAY environment variable, as described in Setting Environment Variables in UNIX.
From your home directory, type the following command:

<source_path>/setup.sh
Do one of the following:
- Interactive Install: Select the Control-M/Server option and continue with the on-screen instructions until the installation is complete.
- Automatic Install: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:
  1. Select the Control-M/Server option and continue with the on-screen instructions until the Summary window.
  2. Click Generate and select the location where the XML parameter file is created.
  3. Click Yes to quit the installation.
    
    A confirmation message appears.
  4. Click Yes.
  5. Copy the automatic installation parameters file to a network location that is accessible to all computers where you want to perform an automatic installation.
  6. To run the installation script, type the following command:
    
    <source_path>/Setup_files/components/ctm/setup.sh -silent <xml_path>/<filename.xml>
    
    If you want to encrypt a password in the installation, run the following command:
    
    <source_path>/Setup_files/components/ctm/setup.sh -encrypt <password>
    
    The installation log can be found at the following location:
    
    <$HOME>/BMCINSTALL/log/BMC_Control-M_Server_<date-time>.log
Continue with Control-M Post-installation Procedures on UNIX.

If you installed Control-M/Server on NFS, you can only use the Control-M/Server user on the same host where Control-M/Server was installed.
If a firewall is active, perform the steps described in System Configuration.

By default, Control-M/Server is configured to work with TCP. To secure your environment, BMC recommends to change your configuration to SSL, as described in Zone 2 and 3 SSL Configuration.

Installing Control-M/Server on Windows

This procedure describes how to install Control-M/Server on Windows. You can install with the default settings, or choose the custom installation to select the database server, database names, usernames, hostnames, and port settings.

If you want to install multiple instances of Control-M/Server on several computers using the same configuration, use the automatic installation, as described in this procedure.

Before You Begin

Ensure that your operating system and database software is compatible with the current version of Control-M/Server, as described in Control-M/Server Windows System Requirements.
Verify that you have met Java requirements, as described in Control-M External Java Installation.
If you are installing on cluster environment, see Control-M/Server Windows Cluster Configuration

Begin

Log in to the computer using a user ID that has Administrator permissions.
Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory.
From a command prompt window, run the following command:

<source_path>\setup.exe
Do one of the following:

Interactive Install: Select the Control-M/Server option and continue with the on-screen instructions until the installation is complete.

Automatic Install: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:
1. Select the Control-M/Server option and continue with the on-screen instructions until the Summary window.
2. Click Generate and select the location to create the XML parameter file.
3. Click Yes to quit the installation.
  
  A confirmation message appears.
4. Click Yes.
5. Copy the automatic installation parameters file to a network location that is accessible to all computers where you want to perform an automatic installation.
6. Log in using a user ID that has Administrator permissions on the current computer.
  
  Run the following installation script:
  
  <source_path>\Setup_files\components\ctm\setup.exe -silent <xml_path>\<filename.xml>
  
  If you want to encrypt a password in the installation, run the following command:
  
  <source_path>\Setup_files\components\ctm\setup.exe -encrypt <password>
  
  The installation log can be found at the following location:
  
  <installFolder>\BMCINSTALL\log\BMC_Control-M_Server_<date-time>.log
If a firewall is active, perform the steps described in System Configuration.

By default, Control-M/Server is configured to work with TCP. To secure your environment, BMC recommends to change your configuration to SSL, as described in Zone 2 and 3 SSL Configuration.

Uninstalling Control-M/Server from UNIX

This procedure describes how to uninstall Control-M/Server from UNIX.

Before You Begin

Ensure that all jobs have ended.

Begin

Log in as a Control-M/Server user.
Navigate to the following directory:

<ctmserver_InstallFolder>/BMCINSTALL/uninstall/
Type one of the following commands:

Interactive Uninstall: DRCTV.9.0.21.000/uninstall.sh

Automatic Uninstall: DRCTV.9.0.21.000/uninstall.sh -silent

Control-M/Server is successfully removed from your computer. If you downgraded, Control-M components are up and running.

Uninstalling Control-M/Server from Windows

This procedure describes how to uninstall Control-M/Server from Windows.

Before You Begin

Ensure that all jobs have ended.

Begin

From the Start menu, select Control Panel.
Double-click Programs and Features.
Select Control-M/Server 9.0.21.000, and click Uninstall.
Click OK to continue.

Control-M/Server is successfully removed from your computer. If you downgraded, Control-M components are up and running.

Performing an Automatic Control-M/Server Uninstall on Windows

This procedure describes how to uninstall Control-M/Server from Windows via an automatic uninstall.

Before You Begin

Ensure that all jobs have ended.

Begin

Log in to the computer using a user ID that has Administrator permissions.
Navigate to the following directory:

<ctmserver_InstallFolder>\BMCINSTALL\uninstall\DRCTV.9.0.21.000
Type the following command:

Uninstall.exe -silent

Control-M/Server is successfully removed from your computer.