Specifying Long OUT Condition Names

Regular prerequisite conditions are not more than 20 characters in length. If you want to specify a longer condition name, up to 39 characters in length, enter the string LONG in the date reference field of an empty OUT condition line. An (L) appears at the beginning of the line. If the field already contains data, entering the string LONG will open a new long OUT condition line, with (L) appearing at the beginning of the line. You can now insert a long condition name, as illustrated in Figure 265.

Specify SHRT in the date reference field to revert back to condition names of standard length.

Note:

• Long condition names cannot be used in CMEM rule definitions.
• If you want to use the UFLOW (unique flow) feature, the condition names must not exceed 36 characters since the UFLOW feature concatenates a unique 3-character suffix to the name of any condition that connects jobs within the ordered table.

  Figure 265 Long OUT Condition

JOB: IEFBR14  LIB CTMP.V610.SCHEDULE                TABLE: PHILL1

COMMAND ===>                                      SCROLL===> CRSR

+---------------------------------------------------------------+

  IN     CTMLDNRS-NMIS-OK    ODAT      CTMLDNRS-NMIS-OK1   ODAT  

           CTMLDNRS-NMIS-OK2    ODAT                             

  CONTROL  CECI-ZEBRA-CONT      E                                

  RESOURCE  INITOS               0002                            

  PIPE                                                           

  FROM TIME 0800    +     DAYS    UNTIL TIME      +     DAYS  

  DUE OUT TIME      +     DAYS    PRIORITY *1  SAC    CONFIRM N

  TIME ZONE:                                                     

================================================================

  OUT    CTMLDNRS-NMIS-OK     ODAT -   CTMLDNRS-NMIS-OK1   ODAT -

        (L)  THIS-LINE-CONTAINS-A-LONG-OUT-CONDITION-XXXX  ODAT -

  AUTO-ARCHIVE Y         SYSDB    Y      MAXDAYS      MAXRUNS    

  RETENTION:  # OF DAYS TO KEEP      # OF GENERATIONS TO KEEP    

  SYSOUT OP   (C,D,F,N,R)                                   FROM

  MAXRERUN      RERUNMEM                    INTERVAL     FROM    

  STEP RANGE         FR (PGM.PROC)          TO          .        

  ON PGMST ANYSTEP  PROCST       CODES ****                  A/O

    DO COND                                                      

    DO                                                           

  ON PGMST ANYSTEP  PROCST          CODES ****               A/O

    DO                                                           

  ON SYSOUT                               FROM 001 TO 132    A/O 

    DO                                                           

  ON VAR                                                         

    DO                                                           

  SHOUT WHEN           TIME       +     DAYS     TO          URGN   

    MS                                                            

=== >>>>>>>>>>>>>> END OF SCHEDULING PARAMETERS <<<<<<<<<<<<< ===

COMMANDS: EDIT, DOC, PLAN, JOBSTAT                      15.49.13