Step 2.6 – Define IOA LOADE (PDSE) library parameters

Select minor step 6 in the Minor Steps Selection screen and insert values for the IOA LOADE (PDSE) parameters, as shown in the following table:

Note: When specifying values for parameters or subparameters that include both unit and volume (volser) fields, you must either define both fields, or leave both of them blank. Do not enter a value for only one of them.

Table 13 IOA LOADE (PDSE) library parameters

Parameter	Description
STEPLIBE	Full name of IOA LOADE (PDSE) library. The name must be different from the name of the IOA LOAD (PDS) library. Mandatory Maximum length: 44
PDSEUNIT	Unit of the disk on which the IOA LOADE library is to be placed. Specify a generic unit (for example, 3390—not SYSDA). Maximum length: 8
PDSEVOL	Serial number of the volume on which the IOA LOADE library is to be placed. Maximum length: 6

Parameter

Description

STEPLIBE

Full name of IOA LOADE (PDSE) library. The name must be different from the name of the IOA LOAD (PDS) library.

Mandatory
Maximum length: 44

PDSEUNIT

Unit of the disk on which the IOA LOADE library is to be placed. Specify a generic unit (for example, 3390—not SYSDA).

Maximum length: 8

PDSEVOL

Serial number of the volume on which the IOA LOADE library is to be placed.

Maximum length: 6

Parent Topic

Step 2 – Parameters for File Allocation