|
|
|
|
|
This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.
Explanation: This information message indicates that the IOA Archive Server has started and is currently building the required internal environment.
Corrective Action: No action is required.
Explanation: The IOA Archive Server encountered an internal error.
The cross-memory environment could not be established.
The IOA Archive Server shuts down.
Corrective Action: Activate the Control-D subsystem. If it is already active, deactivate then reactivate it. Try to reactivate the IOA Archive server. If this does not help, check for other system messages that might clarify the cause of the problem and precede accordingly. If these measures are of no avail, record the return code, step name and all other related messages and contact BMC Customer Support.
Explanation: The IOA Archive Server is not APF (Authorized Programming Facility) authorized. The IOASSRV module is not in an APF authorized library or does not have attribute AC=1.
The IOA Archive Server terminates with a return code of 8.
Corrective Action: Add the name of the library in which the IOASSRV module resides to the IEAAPF00 member in the SYS1.PARMLIB library.
Explanation: An invalid command or parameter was passed to the IOA Archive Server by an operator MODIFY command. This message is accompanied by another message that indicates why the command failed.
The MODIFY command is not executed.
Corrective Action: See the accompanying message, which indicates why the command failed.
Explanation: Loading of the modName module failed. Possible causes are:
The IOA Archive Server terminates with a return code of 8.
Corrective Action: Check the system job log for more information. If the problem persists, contact BMC Customer Support.
Explanation: An unrecoverable error occurred in the operation of the IOA Archive Server.
The IOA Log file should contain a previous message about the error.
The IOA Archive Server shuts down.
Corrective Action: Check the accompanying message in the IOA Log file. Contact your system programmer for assistance. If the problem is not resolved, contact BMC Customer Support.
Explanation: An IOA Archive Server internal subtask abended.
The IOA Log file and system log should contain previous messages about this error.
The IOA Archive Server issues an implicit START command for this media. Attempts are made to initialize media mediaName and continue normal processing. If these attempts fail, the IOA Archive Server sets the status of the abended media to never active and this media becomes unavailable for use by the IOA Archive Server.
Corrective Action: Check the IOA Log file and system log for additional messages which may indicate why media mediaName abended. If the problem is not resolved, contact BMC Customer Support.
Explanation: This information message indicates that the IOA Archive Server is shutting down upon operator’s request.
Corrective Action: No action is required.
Explanation: An invalid command was passed to the IOA Archive Server. This message follows message IOA103E or SRV103E, which contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more information, refer to the section that describes the IOA Archive Server in the Control-D and Control-V User Guide. Enter a valid MODIFY command.
Explanation: The IOA Archive Server encountered an invalid or unsupported media type specified in the IOASPRM member (IOA Archive Server Installation Parameters).
The media type specified in the IOASPRM member should match one of the supported media types specified in the IOA Archive Server Program List (the IOASPROG member).
The IOA Archive Server terminates with a return code of 8.
Corrective Action: For more information about currently supported media types, refer to the section on how to set IOA Archive Server Installation Parameters in the INCONTROL for z/OS Installation Guide. Correct the media type in the IOASPRM member (IOA Archive Server Installation Parameters). Start the IOA Archive Server again. If the problem is not resolved, contact BMC Customer Support.
Explanation: Highlighted, unrollable message.
The name of IOA Archive Server does not match the value of the PROCNAME parameter in the IOASPRM member. The name of the IOA Archive Server must be the same as the value of the PROCNAME IOA Archive Server Installation Parameter in the IOASPRM member.
The IOA Archive Server terminates with a return code of 8.
Corrective Action: Use the correct IOA Archive Server name or correct the value of the PROCNAME parameter. Restart the IOA Archive Server.
Explanation: Highlighted, unrollable message.
This information message indicates that the IOA Archive Server is shutting down due to operator command or due to internal events.
The IOA Log file should contain additional messages about the reason for shutting down the IOA Archive Server.
The IOA Archive Server shuts down.
Corrective Action: No action is required.
Explanation: An error caused the IOA Archive Server to terminate. The IOA Log file and system log file should contain additional messages identifying the specific error.
The IOA Archive Server shuts down.
Corrective Action: Check the IOA Log file and the system log for the reason. Contact your system programmer for assistance if needed.
Explanation: Highlighted, unrollable message.
An attempt was made to start an IOA Archive Server which is already active. It is impossible to run two IOA Archive Servers with the same qName at the same time.
The newly-started IOA Archive Server with the same qName shuts down.
Corrective Action: No action is required.
Explanation: An invalid parameter was passed to the IOA Archive Server by operator command MODIFY. This message follows the IOA103E or SRV103E message, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more details, refer to the section that describes the IOA Archive Server in the Control-D and Control-V User Guide. Reissue the MODIFY command with valid parameters.
Explanation: There is insufficient memory to initiate or operate the IOA Archive Server.
The IOA Archive Server shuts down.
Corrective Action: Increase the IOA Archive Server REGION size. If the problem persists, record the return code and contact BMC Customer Support.
Explanation: Initialization of an IOA Archive Server internal task failed.
Possible causes are:
The IOA Archive Server terminates.
Corrective Action: Check the system log for additional messages which clarify the situation. Try one of the following:
Explanation: Open of the ddName DD statement failed.
Possible causes are:
The IOA Archive Server terminates with a return code of 8.
Corrective Action: Correct the JCL and rerun the job.
Explanation: Highlighted, unrollable message.
The IOA Archive Server issues this message when it determines that no active media are allocated to it.
Every media was terminated due to operator request or internal error. This message disappears when a START command is issued for any media.
The IOA Archive Server continues processing.
Corrective Action: If information about the status of a media is needed, issue a DISPLAY command.
Explanation: This information message indicates that the IOA Archive Server was successfully initialized.
Corrective Action: No action is required.
Explanation: The media was specified in a MODIFY operator command, but was not defined in the IOASPRM member, which defines the IOA Archive Server Installation Parameters. This message follows message IOA103E or SRV103E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more details, refer to the section that describes the IOA Archive Server in the Control-D and Control-V User Guide. Reissue the MODIFY command with the correct media name.
Explanation: An attempt was made to stop media mediaName which was already inactive. This message follows message IOA103E or SRV103E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: No action is required.
Explanation: An attempt was made to start media mediaName which was already active. This message follows message IOA103Eor SRV103E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: No action is required.
Explanation: During initialization, the IOA Archive Server determined that initialization failed for all media specified in the IOASPRM member (IOA Archive Server Installation Parameters).
Every media was terminated due to an unrecoverable error. The IOA Log file should contain additional messages concerning specific errors.
The IOA Archive Server terminates with a return code of 8.
Corrective Action: Check the IOA Log file and the system log for messages describing the error. Contact the system programmer for assistance if needed. Start the IOA Archive Server again. If the problem is not resolved, contact BMC Customer Support.
Explanation: Highlighted, unrollable message.
The IOA Archive Server cannot complete the initialization phase. During IOA Archive Server initialization, a period of time equal to nn cycles elapsed before any media specified for use by the IOA Archive Server completed the initialization process. Each cycle is one IOA Archive Server sleeping interval, whose value in hundredths of a second is defined in the INTERVAL parameter in the IOASPRM member in the IOA Archive Server Installation Parameters.
The initialization of the IOA Archive Server is not completed.
Corrective Action: Check the IOA Log file and the system log for the cause of the problem. If the IOA Archive Server waits a long time for media to complete initialization, and the reason for the delay cannot be determined, issue the CANCEL command to stop the IOA Archive Server. Restart the IOA Archive Server. If the problem is not resolved, contact BMC Customer Support.
Explanation: The IOA Archive Server cannot complete the termination phase. During IOA Archive Server termination, a period of time equal to nn cycles elapsed before the media specified for use by the IOA Archive Server completed the termination process. Each cycle is one IOA Archive Server sleeping interval, whose value in hundredths of a second is defined in the INTERVAL parameter in the IOASPRM member in the IOA Archive Server Installation Parameters.
The termination of the IOA Archive Server is not completed.
Corrective Action: Check the IOA Log file and the system log for the cause of the problem. If the IOA Archive Server waits a long time for media to complete termination, and the reason for the delay cannot be determined, issue operator command CANCEL to stop the IOA Archive Server. If the problem is not resolved, contact BMC Customer Support.
Explanation: A command cannot be passed to media mediaName for execution because the media has not finished executing a previous command. This message follows message IOA103E or SRV103E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: Reissue the MODIFY command later.
Explanation: The IOA Archive Server encountered an internal error.
The IOA Archive Server terminates with abend code 0006. The output includes a dump of the abend.
Corrective Action: Report the message ID and return code to BMC Customer Support.
Explanation: An attempt was made to start a device assigned to media mediaName while that media was inactive. Media mediaName must be started before issuing a START command for a device assigned to it. This message follows message IOA103E or SRV103E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: Issue the following operator command to start media mediaName: F IOASMON,START MEDIA=media-name
After media mediaName is initialized successfully, issue the MODIFY command to start a device. For more details, refer to the section that describes the IOA Archive Server in the Control-D and Control-V User Guide.
Explanation: During the initialization phase, the IOA Archive Server determined that the IOASPRM member does not include a definition for any media or only includes definitions for media of the DASD type. Possible causes are:
Do not activate the IOA Archive Server unless a media type other than DASD is defined in the IOASPRM member.
The IOA Archive Server shuts down.
Corrective Action: If the services of the IOA Archive Server are required, add appropriate media to the IOASPRM member in the IOA Archive Server Installation Parameters, and restart the IOA Archive Server.
Explanation: An attempt to access a migrated index failed because there is insufficient memory in the IOA Archive server to open a session. A session is opened in the IOA Archive server when accessing a migrated index. This error occurs when there is not enough memory in the IOA Archive server to hold the RBA range table of the user, and the index record for that index.
The session is not opened and the migrated index cannot be viewed.
Corrective Action: Increase the region of the IOA Archive server.
Explanation: An internal error occurred when accessing a migrated index. A session is opened in the IOA Archive Server when accessing a migrated index.
The session is not opened and the migrated index cannot be viewed.
Corrective Action: Print the user record and index records of the report. Record the last actions of the user before the error occurred. Supply this information to BMC Customer Support.
Explanation: The MODIFY operator command to activate the IOA Archive Server debug facility contains an invalid DEBUG level. Valid DEBUG levels are between 0 and 255. Zero specifies no debugging.
The MODIFY command is not executed. The DEBUG facility is not activated.
Corrective Action: Reissue the operator command with the correct debug level. The required debugging level should be supplied by BMC Customer Support.
Explanation: This information message indicates that the IOA Archive Server debug level has been set to num by a MODIFY operator command.
Each debug level activates the trace option on different components of the IOA Archive Server.
The DEBUG level is set to level num.
Corrective Action: No action is required.
Parent Topic |