Messages MTO600 through MTO6xx

This group includes messages for the Control-O product.

MTO600E ERROR RUNNING CTOCMCK RC= rc

Explanation: The CTOGATE communication facility failed to initialize.

CTOMTO called the CTOCMCK module and then ended with an error. This message follows a CTOGATE error message generated by the CTOCMCK module.

CTOGATE aborts.

Corrective Action: Correct and re-initialize CTOGATE.

MTO614I COMMUNICATION STOPPED

Explanation: This information message indicates that communication stopped due to an operator request.

Control-O communication stops.

Corrective Action: No action is required.

MTO615I COMMUNICATION STARTED.

Explanation: This information message indicates that communication started due to an operator request.

Control-O communication starts.

Corrective Action: No action is required.

MTO616I COMMUNICATION WAS ALREADY STARTED.

Explanation: The user attempted to start communication. However, it was already operating.

Corrective Action: No action is required.

MTO617I COMMUNICATION WAS ALREADY STOPPED.

Explanation: The user attempted to stop communication. However, it had already been stopped.

Corrective Action: No action is required.

MTO619I COMMUNICATION CANNOT BE ACTIVATED.

Explanation: This information message indicates that the user was unable to activate Control-O communication.

STARTCOMM modify command cannot be performed. Control-O was started with the CTOGATE parameter set to NO.

Control-O communication is not activated.

Corrective Action: Start Control-O with the CTOGATE parameter set to YES in the CTOPARM member.

MTO61FI CONTROL-O COMMUNICATION IS ACTIVE. NETWORK NAME= sysname, NETWORK MAP= memName'

Explanation: This information message indicates that Control-O communication initialization is complete.

Communication is operating using system name sysname and communication network map memName.

Corrective Action: No action is required.