|
|
|
|
|
This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.
Explanation: Missing job name. The JOBNAME field is obligatory.
Corrective Action: Fill in the name of the job. This decollating mission will process the reports (outputs) of the specified job name.
Explanation: Missing owner ID. The owner ID field is obligatory.
Corrective Action: Fill in the owner ID. This parameter identifies the user who requests Control-D services. This parameter is mainly used by the Control-D security mechanism.
Explanation: Invalid format specified in the DAYS parameter. The DAYS parameter should contain 1-31, ALL, +1, +3, and so on. For more details, see the DAYS parameter in the Control-D and Control-V User Guide.
Corrective Action: Correct the contents of the field.
Explanation: The ALL parameter was specified together with specific days in the DAYS parameter or the WDAYS parameter. You cannot specify WDAYS or DAYS with the ALL option.
Corrective Action: Omit either the ALL option or the SPECIFIC DAYS option.
Explanation: Invalid format of WDAYS parameter. WDAYS parameter should contain 0-6, ALL, +1, and so on. For more details, see the WDAYS parameter in the Control-D and Control-V User Guide.
Corrective Action: Correct the WDAYS field.
Explanation: The MAXWAIT parameter value is invalid. MAXWAIT should be in the range from 00 through 31 (days in which to execute the mission) or 99 (forever).
Corrective Action: Correct the MAXWAIT field.
Explanation: The DAYS or WDAYS parameter ended with a comma. Additional data is expected after the comma.
Corrective Action: Correct the parameter.
Explanation: The DAYS parameter and the WDAYS parameter were specified together. The WDAYS parameter cannot appear with the DAYS parameter.
Corrective Action: Select either WDAYS or DAYS.
Explanation: The DATES parameter was mixed with DAYS, WDAYS or MONTHS parameters. The DATES parameter must appear alone.
Corrective Action: Erase any data in the DAYS, WDAYS and MONTHS parameters.
Explanation: The DATES and CONFCAL parameters were both specified. These parameters cannot be specified together.
Corrective Action: Omit either the DATES or CONFCAL specification.
Explanation: The MINIMUM and PDS parameters were specified with DAYS, WDAYS, MONTHS, DATES or CONFCAL parameters. The MINIMUM and PDS parameters must appear without any date-related parameters.
Corrective Action: Specify either the MINIMUM and PDS parameters or the date-related parameters, but not both.
Explanation: The MINIMUM parameter was specified, but the PDS field is empty, or vice versa. MINIMUM and PDS parameters must be filled in together.
Corrective Action: Fill in both the MINIMUM and PDS fields.
Explanation: Invalid condition date reference specified. Date reference should be ODAT, PREV, ****, or mmdd (ddmm). For more details, see these parameters in the Control-D and Control-V User Guide.
Corrective Action: Correct the date reference.
Explanation: Invalid or missing condition option. Condition option should be + for ADD, or - for DELETE. For more details, see these parameters in the Control-D and Control-V User Guide.
Corrective Action: Insert + or - in the condition option field.
Explanation: Invalid action specified in DO statement. For valid actions, see the Control-D and Control-V User Guide.
Corrective Action: Correct the DO action field.
Explanation: Invalid SHOUT urgency specified. SHOUT urgency should be R for regular, U for urgent, or V for very urgent. For more details, see these parameters in the Control-D and Control-V User Guide.
Corrective Action: Fill in R, U, or V in the SHOUT urgency field.
Explanation: Invalid WHEN attribute of SHOUT statement.
WHEN should be one of the following:
For more details, see the Control-D and Control-V User Guide.
Corrective Action: Correct the WHEN field.
Explanation: Invalid SHOUT destination code.
SHOUT destination code should be one of the following:
For more details, see the Control-D and Control-V User Guide.
Corrective Action: Correct the SHOUT destination field.
Explanation: Missing IN prerequisite condition name. The condition date reference was specified without a corresponding condition name.
Corrective Action: Fill in the IN prerequisite condition name field.
Explanation: Missing prerequisite condition name in DO COND statement. At least one condition is expected in DO COND statement.
Corrective Action: Fill in the prerequisite condition name.
Explanation: A PREV (or NEXT) date reference was specified for a job scheduled by the PDS parameter. There is no next date or previous date when the job is scheduled according to the status of the library.
Corrective Action: Use another valid date reference.
Explanation: Code option + was specified for a generic date reference. You cannot add a prerequisite condition to all possible dates of the year.
Corrective Action: Enter "-" in the code option or use a different date reference.
Explanation: The SHOUT WHEN parameter contains data which is not relevant to the SHOUT option specified, or the SHOUT WHEN is empty.
Corrective Action: Erase the redundant text.
Explanation: A message is filled in, but the SHOUT line before it is empty.
Corrective Action: Fill in the SHOUT WHEN field. If necessary, fill in the TO destination field as well.
Explanation: There is no message in the SHOUT statement.
Corrective Action: Fill in the message.
Explanation: Invalid data specified for the SEARCH parameter.
The SEARCH parameter has the following options:
For more information, see the Control-D and Control-V User Guide.
Corrective Action: Correct the SEARCH field.
Explanation: A WHEN page identification criterion or a DO USER statement was entered without an ON statement. On the following Report Decollating screen, If there is data on the WHEN (line 2) or DO line (line 3), there must be data on the ON line (line 1).
================================================================= |
|---|
DEF COPIES 01 LVL USER 05 DEST MAX COPIES |
1. ON (CLASS, DSN, SYSDATA, SYSLOG, SYSJCL, SYSMSG) PRT DEST MAX COPIES 05 PRINTING PARAMETERS |
2. WHEN LINE 001- 005 COL 010- 070 PRINT Y ...... STRING = MONTHLY A/R |
3. DO PRINT BY MORNING |
================================================================= |
Corrective Action: Fill in the ON line (line 1), or erase the data from the WHEN (line 2) or DO line (line 3).
Explanation: Invalid ON statement.
ON should be one of the following:
Corrective Action: Correct the ON parameter.
Explanation: ON CLASS has been specified without the letter of the class.
Corrective Action: Fill in the letter of the class.
Explanation: ON DSN has been specified without the Compressed Dataset Access Method selection criteria. The selection criteria specified must be a valid Compressed Dataset Access Method (CDAM) retrieval parameter, such as PREFIX, PGMSTEP, and so on.
For a list of valid CDAM parameters, see the Control-D and Control-V User Guide.
Corrective Action: Fill in the selection criteria.
Explanation: The FROM line is greater than the UNTIL line in the page identification criteria.
Corrective Action: Change either the FROM line or the UNTIL line.
Explanation: The FROM column is greater than the UNTIL column in the page identification criteria.
Corrective Action: Change either the FROM column or the UNTIL column.
Explanation: Invalid AND/OR option specified. The valid options are A for and relation O for or relation, blank for no additional WHEN line.
Corrective Action: Fill in A, O, or blank.
Explanation: An additional WHEN line has been displayed due to an A or O in the AND/OR parameter, but the line is empty.
Corrective Action: Fill in the additional WHEN line or delete the A or O in the previous WHEN line.
Explanation: WHEN LINE/COLUMN references have been entered, but the search string is missing. If line and column references are used, the search string is obligatory.
Corrective Action: Fill in the search string.
Explanation: The user entered an invalid value. E, A, S, or blank are the only values valid in this field.
Corrective Action: Enter the correct value.
Explanation: The user entered an invalid value. Y, N, S, or blank are the only values valid in this field.
Corrective Action: Enter the correct value.
Explanation: DO PRINT has been selected, but the Printing Mission name is missing. The Printing Mission name is obligatory when DO PRINT is used.
Corrective Action: Enter the Printing Mission name.
Explanation: DO BACKUP has been selected, but the Backup Mission name is missing. The Backup Mission name is obligatory when DO BACKUP is used.
Corrective Action: Enter the Backup Mission name.
Explanation: DO NAME has been selected, but the report name is missing. The report name is obligatory when DO NAME is used.
Corrective Action: Enter the report name, or *. For more details, see the Control-D and Control-V User Guide.
Explanation: There is data in the WHEN page identification criteria line AND/OR field, but no data in the LINE or COL range. In the following Report Decollating screen, if there is data in the PRINT, REF NEXT PAGE, CONT ID, AND/OR, or STRING fields, then LINE and COL must also be filled in.
WHEN LINE 001- 005 COL 010- 070 PRINT Y ......AND/OR A STRING = MONTHLY A/R
Corrective Action: Fill in the LINE or COL range, or erase the PRINT, REF NEXT PAGE, and so on, data fields.
Explanation: Two consecutive WHEN lines are specified without AND/OR relations between them.
Corrective Action: Erase the second WHEN line or do as the message says.
Explanation: An asterisk (*) has been inserted in both the LEVEL field and the USER field of a DO USER statement.
Corrective Action: Choose one field, and clear the other.
Explanation: The value S for the MUTLI parameter and the value Y for the STORE parameter are invalid.
Corrective Action: Leave the value of the MULTI parameter blank and set the value of the STORE parameter to N.
Explanation: The value specified for the field where the cursor is positioned is invalid.
Corrective Action: Set the value of the field to S or leave it blank.
Explanation: DO MASKRUL has been selected, but the MASK ruler name is missing. A MASK ruler name is required when using DO MASKRUL.
Corrective Action: Enter a MASK ruler name. For more details, see the INCONTROL for z/OS Administrator Guide, and the Control-D and Control-V User Guide.
Explanation: There is data in the DO USER LINE or COL field, but the USER data field is not set to *.
If either the DO USER LINE or COL field is specified, then the USER data field must be set to *. For more information, see DO USER in the Control-D and Control-V User Guide.
Corrective Action: Enter * in the USER data field, or clear the LINE and COL fields.
Explanation: DO USER is specified, but the USER field is blank. When DO USER is specified, the USER field must be filled in.
Corrective Action: Fill in the USER field.
Explanation: An asterisk (*) was entered in the USER field in the DO USER parameter, but the FROM and UNTIL COL fields are unspecified. FROM and UNTIL COL fields must be specified when * is used for the USER field.
Corrective Action: Fill in the FROM and UNTIL column references.
Explanation: An asterisk (*) has been entered in the DO NAME field, but the FROM and UNTIL COL fields are unspecified. FROM and UNTIL COL fields must be specified when * is used for DO NAME.
Corrective Action: Fill in the FROM and UNTIL column references.
Explanation: There is data in the DO NAME LINE and COL fields, but the NAME data field is not set to *.
If the DO NAME LINE and COL fields are entered, then the NAME data field must be set to *. For more information, see DO NAME in the Control-D and Control-V User Guide.
Corrective Action: Enter * in the NAME data field, or erase the LINE and COL fields.
Explanation: Invalid class mixture specified. When specifying class *, no other class can be specified. For more information, see the Control-D and Control-V User Guide.
Corrective Action: Correct the CLASS field.
Explanation: Y was entered in the GENERIC field, but the data entered in the ON CLASS field contradicts the installation parameters. If Y was entered in the GENERIC field, then the ON CLASS option must contain one of the Generic classes specified during Control-D installation.
Corrective Action: Check the GENCLAS parameter of the CTDPARM and enter the correct one in the ON CLASS field.
Explanation: N was entered in the GENERIC field, but the data entered in the ON CLASS field contradicts the Installation Parameters. If N was entered in the GENERIC field, then the ON CLASS option must not contain one of the Generic classes specified during Control-D installation.
Corrective Action: Check the GENCLAS parameter of the CTDPARM and enter the correct one in the ON CLASS field.
Explanation: Y was entered in the GENERIC field, but the ON statement does not contain the CLASS option. A Generic decollating mission can contain ON statements only with the CLASS option.
Corrective Action: Correct the ON statement. For more information, see the Report Decollating Parameters chapter in the Control-D and Control-V User Guide.
Explanation: N was entered in the WHEN IN QUEUE field despite the fact that Y was entered in the GENERIC field. The parameter specified in the WHEN IN QUEUE field for Generic decollating missions must be either Y or blank.
Corrective Action: Enter Y or blank in the WHEN IN QUEUE field. For more information, see the Report Decollating Parameters chapter in the Control-D and Control-V User Guide.
Explanation: DO APPROV is specified, but the APPROV field is blank. When DO APPROV is specified, the APPROV field must be filled in.
Corrective Action: Fill in the APPROV field.
Explanation: The user started to enter data in the fields of the new ON statement without entering data in the DO and/or WHEN fields of the previous ON statement. The ON statement must contain at least one non-empty WHEN or DO field.
Corrective Action: Enter data in the WHEN or DO fields of the previous ON statement, or erase data from the fields of the current ON statement.
Explanation: An invalid format of parameters was detected for a variable or variable function. The variable or variable function was specified in a DO or WHEN statement.
The statement has the following valid format, where POS (startpos) and LTH (len) must both be numeric and not greater than 9.
DO doname %%variable(startpos,len)
or
WHEN …
STRING %%variable(startpos,len)
The specified range may be invalid for one of the following reasons:
Currently, only the %%$CELL function is supported.
The $CELL function has the following valid format, where col is the Excel column letter in a range from A to IU and row is the Excel row, a number greater than 0 and not greater than 255.
DO SET %%$CELL(col[row])
The specified column and row may be invalid for one of the following reasons:
Corrective Action: Correct the DO or WHEN statement. For more information, see the DO or WHEN parameters in the Control-D and Control-V User Guide.
Explanation: Invalid monitor number specified. The MONITOR field should be blank or 1 for the primary monitor, or 2-9 for secondary monitors.
Corrective Action: Correct the MONITOR field.
Explanation: Invalid monitor specified for generic mission. Generic missions can only be processed by the monitor specified in the GENMON Installation Parameter (in CTDPARM).
Corrective Action: Change the MONITOR field of the decollating mission to the value specified in the GENMON parameter.
Explanation: Invalid monitor specified. The number of Control-D monitors is defined in the CTDMON# Installation Parameter (in CTDPARM).
Corrective Action: Change the MONITOR field of the decollating mission to a value not higher than that specified in the CTDMON# parameter.
Explanation: An invalid option was typed.
Valid options are:
Corrective Action: Specify a valid option.
Explanation: Either the H option was specified after a scrollable line, or the F option was specified before a scrollable line. Header and footer sections must be entirely unscrollable. Header lines may not be preceded by scrollable unmarked lines, and the footer lines may not be followed by scrollable unmarked lines.
Corrective Action: Correct the header or footer specifications.
Explanation: No line in the page was left unmarked. At least one line must be scrollable and unmarked.
Corrective Action: Unmark at least one line in the page.
Explanation: An invalid range ID was specified in the Cut line. Range ID must be a digit or any letter except the letter E.
Corrective Action: Correct the Cut line.
Explanation: A specified range was not terminated with the letter E.
Corrective Action: Correct the Cut line.
Explanation: The same letter was already used as a range ID. The same letter may not be used to specify more than one range ID. Range ID must be unique.
Corrective Action: Correct the Cut line.
Explanation: A letter E that does not terminate any range was specified. The letter E may only terminate a range; it may not be used to specify a range ID.
Corrective Action: Correct the Cut line.
Explanation: Insufficient memory to save the column editing specifications in memory.
All the latest changes are ignored.
Corrective Action: Exit from all the other screens (screen A, screen 5, and so on) and try again to specify the column editing. If it happens again, notify your INCONTROL administrator.
Explanation: An invalid value was specified in the FREEZE LINE field. The FREEZE LINE describes the columns to be frozen or not frozen.
Valid FREEZE LINE options are:
Corrective Action: Put a valid FREEZE LINE option in the FREEZE LINE field.
Explanation: An invalid value was specified for the WRITER OPTION parameter in the Print Mission Definition screen. The only valid WRITER OPTION values are blank and TEST.
The cursor stays in the field until a valid WRITER OPTION value is specified.
Corrective Action: Specify a valid WRITER OPTION value
Explanation: This information message indicates that the CTDCP2A utility is copying the list of reports from the Permanent User Report List file to the Active User Report List file.
Corrective Action: No action is required.
Explanation: This information message indicates that the CTDCP2A utility has finished copying the list of reports from the Permanent User Report List file to the Active User Report List file. This is a normal end message for the CTDCP2A utility.
Corrective Action: No action is required.
Explanation: An error occurred during the execution of the CTDCP2A utility.
Corrective Action: A previous message should describe the error.
Explanation: The content of the date parameter passed to the CTDCP2A utility is invalid. The valid format is ddmmyy or mmddyy.
Corrective Action: Correct the date, and rerun the CTDCP2A utility.
Parent Topic |