CA-7 to Control-M Easy Reference

The following tables map CA-7 features with their corresponding Control-M functionalities.

Table 29 Mapping of CA-7 Features to Corresponding Control-M Functionalities
Table 30 Mapping of Control-M Functionalities to Corresponding CA-7 Features
Table 31 Mapping of CA-7 Screen Fields to Control-M Parameters

Table 29 Mapping of CA-7 Features to Corresponding Control-M Functionalities

CA-7 Option	Control-M Option
Active Queue	Active Jobs File
ADDRQ	"?" next to job (Screen 3) "A" next to condition (Screen 3)
ADDSCH	"N" next to job (Screen 3)
Base Calendar	WORKDAY Calendar
Batch Card Load	CTMJOB
Batch Terminal	CTMRKSL
BDATE	No direct equivalent
/BRO	No direct equivalent
Calendar Macro	CTMRCAL
Calendar Macro	Screen (8) Calendar PDS
CANCEL	"H" next to job (Screen 3) "D" next to job (Screen 3)
Central Control System	"Online Facility"
Central Control System	CONTROLM
Cold Start	No direct equivalent
Communication Manager	No direct equivalent
Daily Run Log	Log file
Database Load	FORMCTM
Database Maintenance	CTMCAJF
DEMAND	ORDER/FORCE
EDATE	Use special Calendar
Editor	Standard ISPF Edit
Emergency Restart	S CONTROLM
ETIME	LATE
Forecasting	Forecasting/Simulation utility
FORM start	S CONTROLM
FSTRUCT	"N" next to job (Screen 3)
HEAD OF STREAM	Head of tree
Historical Report	"S" option on Status screen or "JOBSTAT" command (Screen 3)
HOLD	"H" next to job (Screen 3)
ICOM	ISCF
Initialization Deck	CTMPARM
JCL Data sets	MEMLIB any PDS[E]
JCL override	OVERLIB any PDS[E]
JCLID	No direct equivalent
JCLOVRD	"J" next to job (Screen 3)
JOB	MEMNAME
JOB DEP	IN Condition
JOB DEP/	CONTROL Resource
Job name	MEMNAME
Job Number	Order ID
Job restart	"R" option on the Status Screen (3)
LACT	"SHOW" command on Screen 3
LACTR	"SHOW" command on Screen 3
LDSN	Simulation/Forecasting – Tape-Pull List
No direct equivalent	IN Condition "PREV"
LIST	"Z" next to job then type “DOC” on command line
LJCL	"J" next to job (Screen 3)
LJES	Present on Screen 3 (JES number)
LJOB	"Z" next to job (Screen 3)
Log Data Set(s)	LOG Option 5 from the Main Menu
LPOST	"SHOW" command on Screen 3
LPRE	"SHOW" command on Screen 3
LPRRN	"SHOW" command on Screen 3
LQ/LQUE	"SHOW" command on Screen 3
LRDY	"SHOW" command on Screen 3
LREQ	"?" next to job (Screen 3)
LRLOG	Option 5 from main Menu or "L" next to job (Screen3)
Main-id	Machine ID
Negative Dependency	CONTROL Resource
POST	Adding a Condition
Post Processing Queue	Active Jobs File
Pre-process Queue	Manual Conditions
Prior run Queue	Active Jobs File
Ready Queue	Active Jobs File
Request Queue	Active Jobs File
REQUEUE	"R" next to job (Screen 3)
ROLL	SHIFT
RUN	"?" Next to job (Screen 3) "A" next to requirement (Screen 3)
SCHEDID	SCHEDULE RBC
SHUTDOWN	P CONTROLM
START	S CONTROLM
Start Command	S CONTROLM
STOP	P CONTROLM
STOP Command	P CONTROLM
SUBTM	FROM TIME
Swap Command	NOT a Requirement
Trigger	IN Condition
U7SVC	IOACND
U7SVC	IOADDC
Virtual Resource Management	RESOURCE/CONTROL

Table 30 Mapping of Control-M Functionalities to Corresponding CA-7 Features

Control-M Option	CA-7 Option
"?" Next to job (Screen 3) "A" next to requirement (Screen 3)	RUN
"?" Next to job (Screen 3) "A" next to condition (Screen 3)	ADDRQ
"?" Next to job (Screen 3)	LREQ
"H" Next to job (Screen 3)	HOLD
"H" Next to job (Screen 3) "D" next to job	CANCEL
"N" Next to job (Screen 3)	ADDSCH
"J" Next to job (Screen 3)	LJCL
"Online Facility"	Central Control System
"R" next to job (Screen 3)	REQUEUE
"R" option on the Status Screen (3)	Job restart
"S" option on Status screen or “JOBSTAT” command Screen (3)	Historical report
"SHOW" command on Screen 3	LACT
"SHOW" command on Screen 3	LACTR
"SHOW" command on Screen 3	LPOST
"SHOW" command on Screen 3	LPRE
"SHOW" command on Screen 3	LPRRN
"SHOW" command on Screen 3	LQ/LQUE
"SHOW" command on Screen 3	LRDY
"Z" next to job (Screen 3)	LJOB
"Z" next to job then type “DOC” on command line	LIST
Active Jobs File	Active Queue
Active Jobs File	Post-Processing Queue
Active Jobs File	Prior run Queue
Active Jobs File	Ready Queue
Active Jobs File	Request Queue
Adding a Condition	POST
Adding a Condition	POSTING
CONTROL Resource	JOB DEP/
CONTROL Resource	Negative Dependency
CONTROLM	Central Control System
CTMJOB	Batch Card Load
CTMPARM	Initialization Deck
CTMRCAL	Calendar Macro
CTMRFLW, "G" or Simulation/Forecasting	FSTRUCT
CTMRKSL	Batch Terminal
Simulation/Forecasting utility	Forecasting
FORMCTM	Database Load
FORMCTM	Database Maintenance
FROM TIME	SUBTM
Head of stream	HEAD OF STREAM
IN Condition	JOB DEP
IN Condition	Trigger
IN Condition "Prev"	Lead Time Dependency
IOACND	U7SVC
IOADDC	U7SVC
ISCF	ICOM
LATE	ETIME
Log file	Daily Run Log
LOG Option 5 from the Main Menu	Log data Set(S)
Machine ID	Main-id
Manual Conditions	Pre-process Queue
MEMNAME	JOB
MEMNAME	Job name
MEMLIB any PDS	JCL Data sets
No direct equivalent	Communication Manager
No direct equivalent	BDATE
No direct equivalent	Cold Start
No direct equivalent	JCLID
No direct equivalent	BRO
NOT a Requirement	Swap Command
Option 5 from main Menu “L” next to job (Screen 3)	LRLOG
Order ID	Job Number
ORDER/FORCE	DEMAND
OVERLIB any PDS	JCL override
P CONTROLM	SHUTDOWN
P CONTROLM	STOP
P CONTROLM	STOP Command
Present on Screen 3 (JES number)	LJES
S CONTROLM	START
S CONTROLM	Start Command
S CONTROLM	Emergency Restart
S CONTROLM	FORM start
Screen (8) Calendar PDS	Calendar Macro
SHIFT	ROLL
Simulation/Forecasting – Tape-Pull List	LDSN
Standard ISPF Edit	Editor
Schedule RBC	SCHEDID
Use special Calendar	EDATE
WORKDAY Calendar	Base Calendar

Table 31 Mapping of CA-7 Screen Fields to Control-M Parameters

CA-7 Screen	CA-7 Field	Control-M Scheduling Screen
JOB	JOB	MEMNAME, OWNER, GROUP, TABLE name, SMART Table Entity name
	MEMBER	%%INCLIB, %%INCMEM
	JCLID	MEMLIB
	SYSTEM	APPL
	JCL-OVRD	IN condition (manual)
	VERIFY	IN condition (manual)
	MAINT	Ignore DSN connections
	HOLD	IN condition (manual)
	EXEC=N	OVERLIB=DUMMY
	PRTY	PRIORITY
	COND-CODE and RO	ON PGMST
	TYPE1 and TYPE2 (tape)	RESOURCE
	CLASS	RESOURCE
	INSERT RMS	DO IFRERUN, Control-M JCL steps
	UID	OWNER
	DONT SCHEDULE BEFORE/AFTER	DEFINITION ACTIVE FROM, UNTIL
	MAINID	SYSTEM ID or distributed job def
	OWNER	OWNER
	PROMPTS	SHOUT WHEN LATESUB
	CLOCK-TIME	SHOUT WHEN EXECTIME
	ARFSET
SCHD, JOB	SCAL	CONFCAL, DCAL, WCAL
	SCHID	SCHEDULE RBC, ST VAR
	ROLL, INDEX	SHIFT
	SBTM	FROM, SAC
	DOTM and LDTM	DUE OUT
	SYMETRIC	TASKTYPE=CYC, DATE, INTERNVAL nnnD FROM TRGT
	REPEAT	TASKTYPE=CYC, INTERNVAL nnn, FROM TIME hhmm, UNTIL TIME hhmm
	Scheduling Information	Scheduling criteria
SCHD, JTRG	DEP-JOB	IN condition
	LEADTM=00	IN or OUT conditions, date=****
	DEP-JOB=/	Control
	DEP-JOB=?	'maybe' IN condition
	DSN	IN condition
	NWK	IN condition (manual)
	USER REQUIREMENTS	IN condition (manual)
PROSE	PROSE data	(multi line) DESC or DOCMEM and DOCLIB
RM/RSRC	EXC	CONTROL
	SHR	CONTROL
	RCT	RESOURCE
	CRQ	IN condition (manual)
	ASX	IN condition (manual)
	VAR	SCHENV
CA-7	#HLD	IN Condition (manual)
JCL Parameters	#ARF	Specify an ARFSET definition
	#HLD	IOATEST utility
	#JCL	IN condition (manual)
	#JI, #JO, #JEND, #X1, #XO, #XEND	AutoEdit Statements
	#MNT	Ignore DSN connections
	#NOX	%%GOTO AutoEdit statement
	#MSG	IOANOTE utility
	#NTR	Suppress OUT Conditions
	#RES	PRIORITY, SHOUT WHEN EXECTIME, RESOURCE, CTMRELRS utility
	#SCC	ONPGMST
	#VER	IOATEST utility
	CLASS=jobclass	RESOURCE
	USER=userid	OWNER
	GROUP=groupid	OWNER
	NOTIFY=userid	OWNER
	DEMAND[H]	various parameters
	POST	Control-M JCL step
	RESCHNG	Control-M JCL step
	PRSQA, PRSQD	Control-M JCL step
	CA-11 non-restartable steps	Control-M/Restart CTRNORST DD statement
	//*CA-11 comments statement	Control-M/Restart parameters
	CA-11 U11RMS steps	Control-M/Restart parameters
	JES ROUTE PRINT statement	SYSOUT
	HOLD	CTMAPI utility (HOLD)
	RELEASE	CTMAPI utility (FREE )
	RESTART	CTMAPI utility (RERUN)
	#7UNI	Distributed job definition
CA-11	UCC11NR	CTRNORST – Marks step as a non-restartable step. Although we recommend that you change the DD in your JCL to "CTRNORST", it is not a requirement as Control-R accepts the original CA11 DD.