The print sequence of reports in the Print Plan can be adjusted by entering valid Print Control options, as described in the following table:
Table 147 Print Control Options of the Print Plan Screen
Option |
Description |
---|---|
> |
Skip to report. |
< |
Stop at report without printing this report. |
D |
Delete this report from the Print Plan. |
U |
Erase a delete, stop, or skip sign from the Print Plan. |
Type the desired options in the reports O (Option) field and press Enter. The option symbol is then displayed in the first column of the STAT field of the report.
All actions performed in the Print Plan screen are recorded in the IOA Log file.
Skip to Report – >
The > symbol specifies that Print Control should skip to the indicated report. Entering this symbol may cause one or both of the following windows to be displayed:
If a > symbol entered earlier is still in the screen when you enter this symbol again, the Confirm Override window is opened.
Figure 162 Skip to Report Confirm Override Window
----- PRINT PLAN CATEGORY DAILY MISSION STD PRINTING--(A.P)
COMMAND ===> SCROLL===> CRSR
TOTAL PAGES 5524 CURRENT PAGE NUMBER 4705 REPORT PAGE NUMBER 5
O USER +------------------------------------+ NES PRINTED STAT
BR129LO | One SKIP to report (">") already | 937 7937 P
> MGT <---------| defined. Confirm override (Y/N) | 737 6737 P
MGT +------------------------------------+ 649 47649 > P
MGT BRANCH REPORTS PRBRCHR4 08210 2983 161081 D W
MGT EXPENSE UPDATES PREXPR1 09261 331 16497 250 A
DEV INVENTORY REPORT PRINVR2 04500 320 16021 W
DEV EMPLOYEES REPORT PRDEMPS1 08655 152 6737 W
DEV DEVELOPMENT EXPENSES PREXPR2 08657 21 1107 W
========= >>>>>>>>>>>>>>>>>>>> BOTTOM OF PRINT PLAN <<<<<<<<<<<<<<<<< =========
OPTIONS: > SKIP TO REPORT < STOP AT REPORT D DELETE U UNDELETE 15.50.42
If a report is currently printing when the > symbol is entered, the Skip Selection window is opened:
Figure 163 Skip Selection Window
----- PRINT PLAN CATEGORY DAILY MISSION STD ----------(A.P)
COMMAND === +---------------------------------------------+ SCROLL===> CRSR
TOTAL PAGES | Mission has started printing. | E NUMBER 5
O USER | Confirm request (Y/N) | ES PRINTED STAT
BR129LO | SKIP at end of current C-chunk,R-report | 37 7937 P
> MGT +---------------------------------------------+ 37 6737 P
MGT BANK STATEMENTS PRBNKUPT 09261 1402 47649 47649 P
MGT BRANCH REPORTS PRBRCHR4 08210 2983 161081 D W
MGT EXPENSE UPDATES PREXPR1 09261 331 16497 250 A
DEV INVENTORY REPORT PRINVR2 04500 320 16021 W
DEV EMPLOYEES REPORT PRDEMPS1 08655 152 6737 W
DEV DEVELOPMENT EXPENSES PREXPR2 08657 21 1107 W
========= >>>>>>>>>>>>>>>>>>>> BOTTOM OF PRINT PLAN <<<<<<<<<<<<<<<<< =========
OPTIONS: > SKIP TO REPORT < STOP AT REPORT D DELETE U UNDELETE 15.50.42
Stop at Report – <
The < symbol specifies that printing should stop when the indicated report is reached.
Note: The report indicated with the < symbol is not printed. Only reports prior to the < symbol are printed. You can print a single report by assigning the symbols > and < to consecutive reports.
If the printing mission is already printing, the < symbol must be placed after the report that is currently printing.
Figure 164 Stop at Report Confirm Override Window
----- PRINT PLAN CATEGORY DAILY MISSION STD PRINTING--(A.P)
COMMAND ===> SCROLL===> CRSR
TOTAL PAGES 5524 CURRENT PAGE NUMBER 4705 REPORT PAGE NUMBER 5
O USER +------------------------------------+ NES PRINTED STAT
BR129LO | One STOP AT report ("<") already | 937 7937 P
< MGT <---------| defined. Confirm override (Y/N) | 737 6737 P
MGT +------------------------------------+ 649 47649 P
MGT BRANCH REPORTS PRBRCHR4 08210 2983 161081 D W
MGT EXPENSE UPDATES PREXPR1 09261 331 16497 250 A
DEV INVENTORY REPORT PRINVR2 04500 320 16021 W
DEV EMPLOYEES REPORT PRDEMPS1 08655 152 6737 < W
DEV DEVELOPMENT EXPENSES PREXPR2 08657 21 1107 W
========= >>>>>>>>>>>>>>>>>>>> BOTTOM OF PRINT PLAN <<<<<<<<<<<<<<<<< =========
OPTIONS: > SKIP TO REPORT < STOP AT REPORT D DELETE U UNDELETE 15.50.42
Delete – D
D (Delete) identifies reports that are not to be printed. Although the report listing is not removed from the Print Plan file, D indicates that the report is to be bypassed during printing.
Note: Delete symbols remain after the reports have been bypassed. If the printing mission is rerun with the same Print Plan, the deleted reports are bypassed again.
Undelete – U
Deleted reports can be "undeleted" by entering option U (Undelete); the "delete" is immediately removed. Whether or not an undeleted report actually prints depends on its location relative to the currently printing report.
U also cancels a stop or skip sign on the same line.
Bypass Option
The B (Bypass) option is used to bypass input conditions and/or the time limit for the mission. This option is for missions with either WAIT SCHEDULE or WAIT PROCESS statuses.
Figure 165 Bypass window
Q23AJOB0 +---------------------------------+
Q23AJOB1 | IN Criteria: N (Y/N) |
B Q23AJOB2 <--------| Time Limit N (Y/N) |
Q23AJOB3 +---------------------------------+
Parent Topic |