Update parameters generally correspond to the parameters of the Control-M Job Scheduling Definition screen. Not all fields in the Job Scheduling Definition screen can be updated using the utility. Fields that can be updated are listed and described below. For a detailed description of each parameter, see the Job Production parameters chapter in the Control-M for z/OS User Guide.
Note: To update fields that are not supported by the CTMTBUPD utility, such as ONPGM or SHOUT, BMC recommends using a combination of the CTMBLT and CTMTLB utilities described in CTMBLT – Create Tables and CTMTLB – Produce XML and CTMBLT Utility Files, respectively. Once the CTMTLB utility has produced statements in the format suitable as input to the CTMBLT utility, these can be edited or updated with any editor, such as ISPF edit, and then run through the CTMBLT utility to recreate the tables with the desired changes.
Fields to be updated can fall into either of two categories:
Fields Easily Updated
You can update the fields shown in Table 151a by specifying the new desired values in the following format:
parm_name=new_value |
where
Note: In Table 151a, an asterisk in column * indicates that character masking can be specified for the parameter as follows:
If an asterisk is specified following a character string, the character string is treated as a prefix (meaning, only the first n characters of the parameter, corresponding to the number of characters preceding the *, participate in the modification).
If the character string begins with one or more asterisks, the number of characters at the start of the parameter value corresponding to the number of asterisks specified do not participate in the modification.
Table 151a CTMTBUPD Parameters
Parameter |
* |
Value |
Description |
---|---|---|---|
ACTIVE-FROM |
|
6 digits in format yymmdd |
Schedule RBC Definition Active From date |
ACTIVE-UNTL |
|
6 digits in format yymmdd |
Schedule RBC Definition Active Until date |
ADJUST-CONDITION |
|
Y (Yes), N (No), D (Dummy), |
Adjust conditions indicator. For SMART Table Entities only |
APPL |
* |
1 through 20 characters |
Application name |
AUTOARC |
|
Y (Yes) or N (No) |
Archive SYSDATA |
CATEGORY |
|
1 through 20 characters |
Category for Control-D |
CONFCAL |
|
1 through 8 characters |
Confirmation calendar name |
CONFIRM |
|
Y (Yes) or N (No) |
Confirmation for schedule |
CYCLIC-TYPE |
|
C, S, V |
Type of interval between cycles: C – constant; S – specified; V – varying |
CYC-RUNTIME |
|
hhmm,nnn |
Enhanced cyclic specific run times in 24-hour format: hh (hour), mm (minutes) with an optional day-offset (nnn) |
DATES |
|
4 digit dates, separated by commas |
DATES scheduling |
DAYS |
|
For information, see the Job Production parameters chapter of the Control-M for z/OS User Guide |
Scheduling days |
DAYSFROM |
|
3 digits (0–120) |
Time FROM days offset |
DAYSKEEPNOK |
|
2 digits (0–99) |
The minimal number of days that the folder and its jobs are kept in the AJF after the folder is marked as "NOT-OK". 1-98 – Number of days to keep. 99 – Keep forever. The above two options are invalid when REMOVEATONCE is set to "No". 0 – Do not keep (Default). This is the only valid value when REMOVEATONCE is set to "No". |
DAYSUNTIL |
|
3 digits (0–120) |
Time UNTIL days offset |
DAYS-DUEOUT |
|
3 digits (0–120) |
Due-out time days offset |
DCAL |
|
1 through 8 characters or "*" |
DAYS calendar name |
DEL-RBC |
* |
1 through 20 characters |
Name of RBC to delete from the SMART Table |
DESC |
|
1 through 50 characters |
Description of job |
DOCLIB |
* |
1 through 44 characters |
Documentation library name |
DOCMEM |
* |
1 through 8 characters |
Documentation member name |
DUE-OUT |
|
[+/-]hhmm |
Due out time |
INSERT-RBC |
* |
1 through 20 characters |
Name of RBC to insert into the SMART Table |
INTERVAL |
|
5 digits (0-64800) |
Minutes between reruns |
INTERVAL-TYP |
|
1 character: S (Start), E (End), or T (Target) |
Interval type |
INTERVL-UNIT |
|
M, H, D |
The units in which INTERVAL is expressed (Minutes, Hours, or Days) |
MAXDAYS |
|
2 digits |
Expiration period |
MAXRERUN |
|
4 digits |
Maximum number of reruns |
MAXRERUN - CYC |
|
4 digits; 0 through 9999 |
Maximum number of cyclic runs. Effective only if TASKTYPE is set to CYC for job or TBC for cyclic SMART Table. |
MAXRUNS |
|
3 digits |
Maximum number of runs |
MAXWAIT |
|
2 digits |
Maximum days job is retained 0-98 (default is 0) 99 indicates "forever" |
MEMLIB |
* |
1 through 44 characters |
Library containing JCL member |
MEMNAME |
* |
1 through 8 characters |
JCL member name |
NJE-NODE |
|
1 through 8 characters |
NJE node identifier |
OVERLIB |
* |
1 through 44 characters |
Overriding JCL library name |
OWNER |
* |
1 through 8 characters |
User-identification |
PREVENT-NCT2 |
|
Y (Yes) or N (No) or F or L |
Prevent ‘NOT CATLGD 2’ errors |
PRIORITY |
|
1 to 2 characters |
Priority |
RBC |
* |
1 through 20 characters |
Schedule RBC name |
RBC-LEVEL |
|
CTM or TBL |
Indicates whether this is a Control-M Rule-based Calendar or a Table Rule-based Calendar |
RBC-RELATION |
|
1 character (blank, O, A) |
RBC And/Or relationship |
RELATION |
|
A or O |
AND or OR relation |
REMOVEATONCE |
|
Y (Yes) or N (No - default) |
Indicates that all the jobs will be removed together, when the folder is ready to be removed. |
RETDAYS |
|
3 digits |
Maximum number of days to retain |
RETGENS |
|
2 digits |
Maximum number of generations to retain |
RETRO |
|
Y (Yes) or N (No) - Y (Yes) is not valid in SMART Tables |
Retroactive selection |
SCHENV |
|
1 through 16 characters |
Workload management scheduling environment |
SHIFT |
|
1 character: >, <, @, blank |
Shift on confirmation calendar |
SHIFT-EXT |
|
3 characters: ±nn, or blank |
For a description, see the Control-M for z/OS User Guide |
SAC |
|
1 character (P, N, -, +, blank) |
Schedule adjustment for conversion |
SYSDB |
|
Y (Yes) or N (No) |
Archive to common data set |
SYSTEM-ID |
|
1 through 4 characters |
SYSTEM-ID identifier |
TABLE |
* |
1 through 20 characters |
Table name |
TASKTYPE |
|
3 characters |
Type of task (job, started task, and so on. For SMART Tables the valid values are: TBC - cyclic SMART Table and TBL - regular table) |
TIMEFROM |
|
[+/-]hhmm |
Earliest time to submit job |
TIMEUNTIL |
|
[+/-]hhmm,> |
Latest time to submit job, submit as soon as possible |
TIME-ZONE |
|
3 characters |
Time zone designation |
TOLERANCE |
|
1 to 4 digits |
Enhanced cyclic tolerance - the maximum number of minutes after the specified time permitted for a late submission. |
VAR-INTERVAL |
|
nnnnn,unit |
Enhanced cyclic varying interval (nnnnn - interval length, unit = M (Minutes), H (Hours), D (Days) |
WCAL |
|
1 through 8 characters or "*" |
WDAYS calendar name |
WDAYS |
|
For information, see the Control-M for z/OS User Guide |
Weekly scheduling days |
Note:
An RBC name of ‘*’ cannot be changed, and an RBC name cannot be changed to ‘*’. To delete a rule-based calendar and all of its corresponding job scheduling definitions from the SMART Table Entity, specify the name of the RBC to be deleted in the RBC selection parameter and specify a null RBC update parameter.
The RBC parameter cannot be used to add new rule-based calendars to SMART Table Entity definitions.
Parent Topic |