This section includes Xerox error and warning messages for the Control-D product.
Explanation: This warning message is issued under message REP26DW when transforming a Xerox report. Transformation continues. The supported returnCode and messageText values are listed in the table Xerox warning messages.
Corrective Action: Read the message in order to determine if user action is required.
Xerox warning messages
Return code  | 
Message text  | 
|---|---|
109  | 
4197 encrypted/decrypted file wrong length  | 
113  | 
bad character descriptor, ignored  | 
114  | 
8790 leading value inconsistent  | 
115  | 
8790 character height inconsistent  | 
116  | 
8790 font has obsolete(IG 1) bitmap fmt  | 
117  | 
8790 font has unknown bitmap format  | 
118  | 
New font with 10 byte FST entries  | 
119  | 
font's space character' width not equal average character space value PTF019  | 
123  | 
cdesc inconsistent w/bitmap scan results  | 
124  | 
#bytes/scan not even for 8790 bitmap  | 
128  | 
requested output type unknown - no o/p  | 
129  | 
can't find output CDesc  | 
130  | 
8790 char ofs would be negative, set to 0  | 
131  | 
wng: cbm.c_buf already allocated  | 
145  | 
unknown token in header  | 
148  | 
bad Line Control Code in IMG  | 
149  | 
unexpected SOI code within IMG  | 
150  | 
data code error in IMG  | 
151  | 
too many samples in current line  | 
152  | 
bad arg to Axx  | 
153  | 
decode error ddd: Line#: 0xXXX=%DDD  | 
154  | 
attempt to read beyond IMG bytecount  | 
155  | 
EOF detected while reading IMG  | 
156  | 
IMG header not found in file  | 
157  | 
IMG line length bad  | 
2700  | 
bad or unsupported JSL command in JSL file  | 
2701  | 
JDL not found in library  | 
2702  | 
JDE not found in JDL  | 
6004  | 
Invalid JSL Command  | 
6005  | 
Unsupported PDL keyword  | 
6006  | 
BEGIN value bad in PDE  | 
6007  | 
LINE PDL parameter invalid  | 
6008  | 
VFU channel assignment invalid  | 
6013  | 
bad TCODE parameter  | 
6025  | 
COPY parameter invalid  | 
6026  | 
FEED parameter invalid  | 
6027  | 
COVER parameter invalid  | 
6028  | 
shift parameter invalid  | 
6029  | 
OFFSET parameter invalid  | 
6030  | 
NUMBER parameter invalid  | 
6031  | 
PAPERSIZE parameter invalid  | 
6032  | 
font character not in font  | 
6033  | 
XEROX FNT Font FILE INVALID  | 
6034  | 
JSL VOLUME HOST parameter INVALID  | 
6035  | 
RECORD ADJUST parameter invalid  | 
6036  | 
RECORD LMULT parameter invalid  | 
6037  | 
RECORD LTHFLD parameter invalid  | 
6038  | 
RECORD OFFSET parameter invalid  | 
6039  | 
RECORD POSTAMBLE parameter invalid  | 
6040  | 
RECORD PREAMBLE parameter invalid  | 
6041  | 
RECORD FORMAT PARAMETER INVALID  | 
6042  | 
BLOCK FORMAT PARAMETER INVALID  | 
6045  | 
BLOCK ADJUST parameter invalid  | 
6046  | 
BLOCK LMULT parameter invalid  | 
6047  | 
BLOCK LTHFLD parameter invalid  | 
6048  | 
BLOCK OFFSET parameter invalid  | 
6049  | 
BLOCK POSTAMBLE parameter invalid  | 
6050  | 
BLOCK PREAMBLE parameter invalid  | 
6051  | 
BLOCK LENGTH parameter invalid  | 
6052  | 
itext parameter invalid  | 
6053  | 
otext parameter invalid  | 
6054  | 
rtext parameter invalid  | 
6055  | 
rform parameter invalid  | 
6056  | 
ACCT DEPT parameter invalid  | 
6057  | 
ACCT USER parameter invalid  | 
6058  | 
output MODIFY parameter invalid  | 
6060  | 
System catalog entry invalid  | 
6061  | 
invalid keyword in system catalog entry  | 
6062  | 
Incomplete entry in system catalog  | 
6063  | 
System Catalog backup file cannot be deleted/renamed over  | 
6066  | 
RPMF Parm entry invalid  | 
6067  | 
invalid keyword in RPMF Parm entry  | 
6068  | 
Incomplete entry in RPMF Parm  | 
6079  | 
PDE cannot be found in current JSL or in system catalog  | 
6080  | 
PCC Table not found in current JSL or in system catalog  | 
6081  | 
Default PCC Table not found in current JSL or in system catalog (SYSCTLG.cat)  | 
6082  | 
Invalid CODE table - not found  | 
6083  | 
CRITERIA entry not found  | 
6089  | 
Image header invalid "Interpress" string not found  | 
6091  | 
Page Interleaved graphic after page transition  | 
6092  | 
Print Line ignored searching for Page Interleaved graphic after page transition  | 
6093  | 
Premature end of file occurred searching for Page Interleaved graphic after page transition  | 
6100  | 
RPMF parameter keyword unsupported  | 
6101  | 
XFONT table parameter keyword unsupported  | 
6102  | 
Invalid orientation in XFONT, PCLFONT statement  | 
6103  | 
File not a supported Xerox font  | 
6106  | 
PFONT parameter not found on XFONT statement  | 
6107  | 
Invalid record length parameter  | 
6108  | 
Invalid VFU table name  | 
6109  | 
VFU table is not found  | 
6110  | 
TCODE table is not found  | 
6111  | 
Invalid parameters in TCODE statement  | 
6117  | 
CME parameter is missing  | 
6129  | 
Font file size is incorrect  | 
6130  | 
System catalog resource name requires 8 characters or less  | 
6137  | 
File is too big to keep in storage  | 
6138  | 
Null pointer passed to fPrintLogoStats  | 
7003  | 
default font is being substituted  | 
7006  | 
bad entry in font mapping table file  | 
7007  | 
bad Type parameter in Symbol Set entry  | 
7010  | 
font character not in target font symbol set  | 
7011  | 
Error in PCLFONT command in the Font Table file  | 
7012  | 
character to be printed does not have a character in the related PCL font set  | 
7014  | 
Font point size not specified and font files not available  | 
7015  | 
Font pitch not specified for FIXED font default substituted  | 
7016  | 
font file open failed when downloading font  | 
7019  | 
Command parser has found that a required parameter in a command is missing  | 
7024  | 
The above error occurred in the following command:  | 
7025  | 
no messages produced by conversion program  | 
7026  | 
buffer memory overflowed - being reallocated  | 
7027  | 
no character available in font to map X'1B' (Escape) into  | 
7028  | 
attempt to position PCL cursor off page  | 
7029  | 
Attempt to delete file failed  | 
7031  | 
Xerox Font not found  | 
7032  | 
Default font will be substituted, page will probably be incorrect  | 
7034  | 
Font index offset incorrect, usually means offset longer than record  | 
7036  | 
Invalid IDR table name  | 
7037  | 
IDR table is not found  | 
7038  | 
Ink index offset incorrect, usually means offset longer than record  | 
7039  | 
Invalid IDFAULT parameter  | 
7040  | 
Hex 0A or 0B in form DL but no INK font in TL  | 
7041  | 
Font name in Xerox font header is different than font file name  | 
Explanation: This error message is issued under message REP26DW when transforming a Xerox report. The supported returnCode and messageText values are listed in the table Xerox error messages.
Transformation stops and ends with an error.
Corrective Action: Correct the error as described in the message.
Xerox error messages
Return code  | 
Message text  | 
|---|---|
1  | 
processor long is less than 32 bits  | 
2  | 
file does not exist  | 
3  | 
input file in unrecognizable format  | 
4  | 
error writing output font file  | 
5  | 
attempt to read beyond end of file  | 
6  | 
unable to write to file  | 
7  | 
seek error  | 
8  | 
heap memory exhausted  | 
9  | 
Security check failed -added URM013  | 
10  | 
unable to read from file  | 
11  | 
bad option in arglist  | 
12  | 
bad argument count  | 
18  | 
incomplete PCL command in file  | 
19  | 
PCL command string too long  | 
20  | 
pcl font header wrong type  | 
21  | 
pcl header wrong type  | 
22  | 
bitmap dimensions out of range  | 
25  | 
output file size >64k  | 
26  | 
system error -- to_canon() function  | 
27  | 
8790 font has unsupported orientation  | 
30  | 
bad interpress header  | 
31  | 
EOF encountered while trying to parse hdr  | 
32  | 
scpixels inconsistent in header  | 
33  | 
at least one IMG parameter is missing  | 
34  | 
NRange not in 5..8  | 
35  | 
nscans too large or too small  | 
36  | 
NRange(%d) not implemented  | 
37  | 
no Start Of Image code in compressed array  | 
39  | 
input band buffer too few scans  | 
42  | 
sys err in pagein  | 
44  | 
error swapping in inband  | 
46  | 
invalid scpixels in header  | 
47  | 
invalid resolution in header  | 
58  | 
bad decompression  | 
59  | 
error writing temporary file  | 
60  | 
error initializing PCL output  | 
61  | 
error writing PCL output  | 
62  | 
error finalizing PCL output  | 
63  | 
no heap to allocate temp buffers  | 
120  | 
file tell operation returned error  | 
6000  | 
DJDE has no END parameter in packet  | 
6001  | 
DJDE Keyword missing  | 
6002  | 
DJDE Invalid Keyword  | 
6003  | 
JSL could not be read & processed  | 
6010  | 
paper size unsupported  | 
6011  | 
two page-oriented DJDEs found on one logical page - only the first is processed  | 
6012  | 
Internal error occurred - see description  | 
6014  | 
bad Criteria parameter in JSL  | 
6015  | 
invalid parameter on TABLE statement in JSL  | 
6016  | 
invalid RSTACK statement in JSL  | 
6017  | 
invalid RPAGE statement in JSL  | 
6018  | 
invalid ROFFSET statement in JSL  | 
6019  | 
invalid RSUSPEND statement in JSL  | 
6020  | 
invalid RRESUME statement in JSL  | 
6021  | 
invalid BANNER statement in JSL  | 
6022  | 
Error in IMAGE DJDE  | 
6023  | 
Error in GRAPHIC DJDE  | 
6024  | 
error reading form file - probably not found  | 
6043  | 
RECORD CONSTANT parameter invalid  | 
6044  | 
BLOCK CONSTANT parameter invalid  | 
6059  | 
System Catalog error  | 
6064  | 
I/O error on input file  | 
6065  | 
RPMF Parm error  | 
6069  | 
error in user font table  | 
6070  | 
fontindex invalid, default font substituted  | 
6071  | 
font name in JSL, DJDE or RPMF is invalid, probably too long  | 
6072  | 
Pagesize in RPMF parameter is invalid  | 
6073  | 
RPMF MARGIN parameter invalid  | 
6074  | 
FILE Processing Error - Cannot open destination file  | 
6075  | 
INCLUDE cannot find CATALOG jsl statements  | 
6076  | 
INCLUDE name invalid (too long)  | 
6077  | 
ONLINE IMAGE data record does not have correct terminating character  | 
6078  | 
font number invalid - out of range of current font list  | 
6084  | 
syntax error encountered in scan for keyword  | 
6085  | 
TEST Criteria parameter invalid  | 
6086  | 
invalid ASSIGN parameter on PCC statement  | 
6087  | 
Repeat count in text string invalid  | 
6088  | 
CME in Invalid sequence at line %u Column %d  | 
6090  | 
IMAGE file missing - open failed  | 
6094  | 
Document interleaved graphic was not found, defaulting to Random mode graphic  | 
6104  | 
Converted font file is not found  | 
6105  | 
Converted font file could not be opened  | 
6112  | 
Required constant in TABLE command has been missing  | 
6113  | 
Invalid DJDE SIDE parameter  | 
6114  | 
Previous image is incomplete  | 
6115  | 
Invalid DJDE BATCH parameter  | 
6116  | 
DJDE CANCEL of non-active GRAPHIC failed  | 
6118  | 
Label record invalid  | 
6119  | 
File is being processed  | 
6120  | 
Excess card writing  | 
6121  | 
Card images is not supported  | 
6122  | 
File pointer can not be NULL  | 
6123  | 
Image control block is not available for header  | 
6124  | 
Unable to open image output file  | 
6125  | 
Invalid image header  | 
6126  | 
Input/output error writing image file  | 
6127  | 
Document interleave image could not be found  | 
6128  | 
Premature end of file occurred reading image file  | 
6131  | 
CME constant font is not in font list default  | 
6132  | 
Image file could not be open  | 
6133  | 
I/O error writing DJDE to output metacode file  | 
6134  | 
I/O error writing RSTACK to output metacode file  | 
6135  | 
Memory overwrite for buffer  | 
6136  | 
Count negative memory deallocation error-buffer  | 
7001  | 
Image Conversion failed  | 
7002  | 
FNT/LGO Conversion failed  | 
7004  | 
I/O error writing to output file  | 
7005  | 
bad header in PCL font file  | 
7008  | 
bad parameter in symbol set command  | 
7009  | 
bad value in Unicode FORMAT A record  | 
7013  | 
unable to get JFCB for infile on MVS  | 
7017  | 
statistics keyword in configuration file has invalid value  | 
7018  | 
statistics file could not be opened  | 
7020  | 
error occurred in memory management - buffer or pool not found during free  | 
7021  | 
Display Field Descriptor block contained invalid character type  | 
7022  | 
internal error DFD/TLDL buffer chain missing  | 
7023  | 
error encountered performing a file seek  | 
7030  | 
Unable to add font control table entry  | 
7033  | 
Xerox FORM missing  | 
7035  | 
Color name in ILIST is too long  | 
Parent Topic |