Messages TRE100 through TRE1xx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

TRE150I LOADING OF RECIPIENT TREE STARTED

Explanation: This information message indicates that the loading of the Control-D Recipient Tree started. It is routinely issued when the Recipient Tree is being loaded.

Corrective Action: No action is required.

TRE151S OPEN OF RECIPIENT TREE MEMBER FAILED - DDNAME "DATREE"

Explanation: An attempt to open the Recipient Tree definition member failed.

Possible causes are:

The DATREE DD statement is missing.
The file allocated to the DATREE DD statement is not the Control-D Recipient Tree.
The attempt to open the tree member referenced by the DATREE DD statement failed.

This message can be produced in the following situations:

during initialization of the Control-D monitor or Printers Control monitor
when security checking in the Online User Report List screen
when using KeyStroke Language (KSL) scripts
when issuing Control-D operator command LOADTREE to a Control-D component

Corrective Action: The System Action and User Response are shown in the following table:

When Message Issued	System Action	User Response
During initialization of the Control-D monitor or Printers Control monitor	The Control-D monitor shuts down.	Modify the JCL procedure (CONTROLD/ CTDPRINT) DATREE DD statement to point to the correct library and member, and bring up Control-D.
When security checking in the Online User Report List screen	The user will not be able to enter the User Report List screen.	Modify the CLIST (CTDISPF, CTMISPFD, DMAN, ROSDMAN, ROSTMAND, TMAND) DATREE DD statement to point to the correct library and member, exit from the Control-D Online Facility, and reenter the Online Facility.
When using KeyStroke Language (KSL) scripts	The job will end with errors. KSL reports will not be produced.	Modify the JCL procedure (CTDRKSL/ CTMRKSLD) to point to the correct library and member name, and rerun the job.
When issuing Control-D operator command LOADTREE to a Control-D component	The new Recipient Tree will not be loaded. Control-D (or another component) will continue using the “old” Recipient Tree.	Modify the Recipient Tree using the Online Recipient Tree Definition screen, and reenter the LOADTREE operator command.

TRE152E PARENT parent OF RECIPIENT recipient IS NOT IN THE TREE OR PARENT LEVEL IS INCORRECT - RECIPIENT IGNORED

Explanation: The recipient entry with the name and level specified in the parent name and parent level fields is not found in the Recipient tree.

This message can be produced in the following situations:

during the initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
the Control-D operator command LOADTREE was issued
the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Recipient Tree will continue. However, this particular recipient will not become part of the Recipient Tree.

Corrective Action: Correct the parent name in the Recipient Tree using the Online Recipient Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Recipient Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing the CHECK command to verify the tree	Correct the tree and reissue the command.

TRE153E INVALID LEVEL lvl OF RECIPIENT recip - RECIPIENT IGNORED

Explanation: An invalid Recipient Tree level has been entered.

The Recipient Tree levels are installation defined (the CTDPARM member). The valid levels are displayed at the top of the Control-D Recipient Tree screen. This message can be produced under in one of the following situations:

during initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
when the Control-D operator command LOADTREE was issued
when the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Recipient Tree will continue. However, this particular recipient will not become part of the Recipient Tree.

Corrective Action: Enter a valid Recipient Tree level in the Recipient Tree using the Online Recipient Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Recipient Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE154S INSUFFICIENT MEMORY TO LOAD THE RECIPIENT TREE - LOADING ABORTED

Explanation: Insufficient memory to load the Recipient Tree.

The loading of the Recipient Tree is aborted. This message can be produced in the following situations:

During the initialization of the Control-D monitor and Printers Control monitor.
When security checking in the Online User Report List screen.
The KeyStroke Language.
When the Control-D operator command LOADTREE was issued.

Corrective Action: The System Action and User Response are shown in the following table:

When Message Issued	System Action	User Response
During initialization of the Control-D monitor and Printers Control monitor	The Control-D monitor will shut down.	Increase the REGION parameter of the Control-D monitor and Printers Control monitor - JCL procedures CONTROLD and CTDPRINT.
While security checking in the Online User Report List screen	The user cannot enter the Online Recipient Tree Definition screen.	Log on again using a larger SIZE parameter.
The KeyStroke Language	The job ends with errors. KSL reports are not produced.	Increase the REGION parameter of the job, and rerun.
When the Control-D operator command LOADTREE was issued	The new Recipient Tree is not loaded. Control-D continues using the “old” Recipient Tree.	Increase the REGION parameter of the Control-D monitor and Printers Control monitor - JCL procedures CONTROLD and CTDPRINT. Bring down Control-D, and then up again.

TRE155S THE RECIPIENT TREE IS EMPTY. LOADING ABORTED

Explanation: The Recipient Tree is empty. Loading is aborted.

The Recipient Tree must be defined using the Installation Parameters. This message can be produced in the following situations:

During the initialization of the Control-D monitor and Printers Control monitor.
When security checking in the Online User Report List screen.
The KeyStroke Language.
The Control-D operator command LOADTREE was issued.

The following system actions can occur, depending on the situation:

During initialization of the Control-D monitor and Printers Control monitor: The Control-D monitor shuts down.
When security checking in the Online User Report List screen: The user cannot enter the Online Recipient Tree Definition screen.
The KeyStroke Language: The job ends with errors. KSL reports are not produced.
The Control-D operator command LOADTREE was issued: The new Recipient Tree is not loaded. Control-D continues using the “old” Recipient Tree.

Corrective Action: Delete this Recipient Tree member from the library, then generate a new Recipient Tree using the Online Recipient Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Bring up the Control-D monitor.
When security checking in the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.

TRE157E INVALID LEVEL lvl OF PARENT parent IN RECIPIENT recip

Explanation: The Recipient Tree level entered for the parent of this recipient is invalid.

The valid levels are displayed at the top of the Recipient Tree screen. This message can be produced in the following situations:

during the initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
the Control-D operator command LOADTREE was issued
the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Recipient Tree will continue. However, this particular recipient will not become part of the Recipient Tree.

Corrective Action: Correct the level for the parent using the Online Recipient Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Recipient Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE158E LEVEL lvl OF THE PARENT parent IS LOWER THAN THE LEVEL OF RECIPIENT recip

Explanation: The level of the parent of the recipient is lower than the level of the recipient being defined.

The level of the parent must be higher than the level of the “child.” (Note that the order can be seen in the Recipient Tree Entry screen).

Corrective Action: Enter a parent name with a different level or give the recipient a lower level.

TRE159E ERROR IN FREEMAIN OF PREVIOUS TREE, LOADING OF NEW TREE CONTINUED

Explanation: The freeing of the memory for the previous Recipient Tree failed.

The Control-D operator command LOADTREE was issued in order to load in a new Recipient Tree. After loading memory for the “new” Recipient Tree, Control-D attempts to free the memory assigned to the “old” Recipient Tree.

The loading of the “new” Recipient Tree will be accepted. However, the memory allocated to the “old” tree will not be freed until Control-D is shut down.

Corrective Action: No action is required.

TRE160I CONTROL-D RECIPIENT TREE LOADED - num RECIPIENTS

Explanation: This information message indicates that the Recipient Tree was successfully loaded.

Corrective Action: No action is required.

TRE161E RECIPIENT recip ALREADY IN TREE - CURRENT RECIPIENT ENTRY IGNORED

Explanation: The recipient entered (recip) is already in the Recipient Tree. The current recipient entry is ignored.

A recipient name (not synonym) can only appear once in the Recipient Tree. This message can be produced in the following situations:

When entering the Online User Report List screen.
The KeyStroke Language.
The Control-D operator command LOADTREE was issued.
The IOAOMON1 operator command LOADTREE was issued.
When IOAOMON1 is initialized.
When saving an edited tree.
When executing the CHECK command to verify the tree.
During the initialization of the Control-D monitor and Printers Control monitor.

The loading of the Recipient Tree will continue. However, this particular recipient will not become part of the Recipient Tree (the first one will).

Corrective Action: Delete the duplicate recipient using the Online Recipient Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Recipient Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE162E USER ENTRY entry NOT REBUILT AFTER AN INTERNAL SORT ERROR

Explanation: The internal sort of the tree elements failed for the user entry identified in the message.

The user entry is disregarded, and processing of the tree is continued.

Corrective Action: Contact BMC Customer Support.

TRE163E MAXIMUM NUMBER OF PC USERS IS EXCEEDED. PC INFO FOR USER usr IS IGNORED

Explanation: The number of users authorized for PC file transfer exceeds the maximum number of PC users defined in the PASDPC member in the IOA PARM library.

Maximum number of PC users in PARM library is defined at the time the license is received to use Control-D/WebAccess Server.

All users over maximum will not be able to use file transfer option.

Corrective Action: Set AUTHORIZED TO USE PC to N for some users in screen T, or obtain a new license with a greater number of PC users.

TRE165I TREE CHECK ENDED SUCCESSFULLY. n RECIPIENTS

Explanation: This information message request is generated by the CHKTREE command. The recipient tree was checked and no errors were found. The number of recipients in the tree is displayed.

Corrective Action: No action is required.

TRE170I LOADING OF APPROVAL TREE STARTED

Explanation: This information message indicates that the loading of the Control-D Approval Tree started. It is routinely issued when the Approval Tree is being loaded.

Corrective Action: No action is required.

TRE171S OPEN OF APPROVAL TREE MEMBER FAILED - DDNAME "DAAPPR"

Explanation: An attempt to open the Approval Tree definition member failed.

Possible causes are:

The DAAPPR DD statement is missing.
The file allocated to the DAAPPR DD statement is not the Control-D Approval Tree.
The attempt to open the tree member referenced by the DAAPPR DD statement failed.

This message can be produced in the following situations:

during initialization of the Control-D monitor or Printers Control monitor
when issuing Control-D operator command LOADTREE to a Control-D component

Corrective Action: The System Action and User Response are shown in the following table:

When Message Issued	System Action	User Response
During initialization of the Control-D monitor or Printers Control monitor	The Control-D monitor shuts down.	Modify the JCL procedure (CONTROLD/ CTDPRINT) DAAPPR DD statement to point to the correct library and member, and bring up Control-D.
When issuing Control-D operator command LOADTREE to a Control-D component	The new Approval Tree will not be loaded. Control-D (or another component) will continue using the “old” Approval Tree.	Modify the Approval Tree using the Online Approval Tree Definition screen, and reenter the LOADTREE operator command.

TRE172E PARENT parent OF APPROVAL approval IS NOT IN THE TREE OR PARENT LEVEL IS INCORRECT - APPROVAL IGNORED

Explanation: The approval entry with the name and level specified in the parent name and parent level fields is not found in the Approval tree.

This message can be produced in the following situations:

during the initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
the Control-D operator command LOADTREE was issued
the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Approval tree will continue. However, this particular Approval name will not become part of the Approval Tree.

Corrective Action: Correct the parent name in the Approval Tree using the Online Approval Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Approval Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing the CHECK command to verify the tree	Correct the tree and reissue the command.

TRE173E INVALID LEVEL lvl OF Approval - APPROVAL IGNORED

Explanation: An invalid Approval Tree level has been entered.

The Approval Tree levels are installation defined (the CTDPARM member). The valid levels are displayed at the top of the Control-D Approval Tree screen. This message can be produced under in one of the following situations:

during initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
when the Control-D operator command LOADTREE was issued
when the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Approval Tree will continue. However, this particular Approval name will not become part of the Approval Tree.

Corrective Action: Enter a valid Approval Tree level in the Approval Tree using the Online Approval Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Approval Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE174S INSUFFICIENT MEMORY TO LOAD THE APPROVAL TREE - LOADING ABORTED

Explanation: Insufficient memory to load the Approval Tree.

The loading of the Approval Tree is aborted. This message can be produced in the following situations:

During the initialization of the Control-D monitor and Printers Control monitor.
When security checking in the Online User Report List screen.
The KeyStroke Language.
When the Control-D operator command LOADTREE was issued.

Corrective Action: The System Action and User Response are shown in the following table:

When Message Issued	System Action	User Response
During initialization of the Control-D monitor and Printers Control monitor	The Control-D monitor will shut down.	Increase the REGION parameter of the Control-D monitor and Printers Control monitor - JCL procedures CONTROLD and CTDPRINT.
While security checking in the Online User Report List screen	The user cannot enter the Online Approval Tree Definition screen.	Log on again using a larger SIZE parameter.
The KeyStroke Language	The job ends with errors. KSL reports are not produced.	Increase the REGION parameter of the job, and rerun.
When the Control-D operator command LOADTREE was issued	The new Approval Tree is not loaded. Control-D continues using the “old” Approval Tree.	Increase the REGION parameter of the Control-D monitor and Printers Control monitor - JCL procedures CONTROLD and CTDPRINT. Bring down Control-D, and then up again.

TRE175S THE APPROVAL TREE IS EMPTY. LOADING ABORTED

Explanation: The Approval Tree is empty. Loading is aborted.

The Approval Tree must be defined using the Installation Parameters. This message can be produced in the following situations:

During the initialization of the Control-D monitor and Printers Control monitor.
When security checking in the Online User Report List screen.
The KeyStroke Language.
The Control-D operator command LOADTREE was issued.

The following system actions can occur, depending on the situation:

During initialization of the Control-D monitor and Printers Control monitor: The Control-D monitor shuts down.
When security checking in the Online User Report List screen: The user cannot enter the Online Approval Tree Definition screen.
The KeyStroke Language: The job ends with errors. KSL reports are not produced.
The Control-D operator command LOADTREE was issued: The new Approval Tree is not loaded. Control-D continues using the “old” Approval Tree.

Corrective Action: Delete this Approval Tree member from the library, then generate a new Approval Tree using the Online Approval Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Bring up the Control-D monitor.
When security checking in the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.

TRE177E INVALID LEVEL lvl OF PARENT parent IN APPROVAL approval

Explanation: The Approval Tree level entered for the parent of this Approval name is invalid.

The valid levels are displayed at the top of the Approval Tree screen. This message can be produced in the following situations:

during the initialization of the Control-D monitor and Printers Control monitor
when entering the Online User Report List screen
the KeyStroke Language
the Control-D operator command LOADTREE was issued
the IOAOMON1 operator command LOADTREE was issued
when IOAOMON1 is initialized
when saving an edited tree
when executing the CHECK command to verify the tree

The loading of the Approval Tree will continue. However, this particular Approval name will not become part of the Approval Tree.

Corrective Action: Correct the level for the parent using the Online Approval Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Approval Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE178E LEVEL lvl OF THE PARENT parent IS LOWER THAN THE LEVEL OF APPROVAL approval

Explanation: The level of the parent of the Approval name is lower than the level of the Approval name being defined.

The level of the parent must be higher than the level of the “child.” (Note that the order can be seen in the Approval Tree Entry screen).

Corrective Action: Enter a parent name with a different level or give the Approval name a lower level.

TRE180I CONTROL-D APPROVAL TREE LOADED - num APPROVALS

Explanation: This information message indicates that the Approval Tree was successfully loaded.

Corrective Action: No action is required.

TRE181E APPROVAL NAME approval ALREADY IN TREE - CURRENT APPROVAL NAME ENTRY IGNORED

Explanation: The Approval name entered is already in the Approval Tree. The current Approval name entry is ignored.

An Approval name can only appear once in the Approval Tree. This message can be produced in the following situations:

When entering the Online User Report List screen.
The KeyStroke Language.
The Control-D operator command LOADTREE was issued.
The IOAOMON1 operator command LOADTREE was issued.
When IOAOMON1 is initialized.
When saving an edited tree.
When executing the CHECK command to verify the tree.
During the initialization of the Control-D monitor and Printers Control monitor.

The loading of the Approval Tree will continue. However, this particular Approval name will not become part of the Approval Tree (the first one will).

Corrective Action: Delete the duplicate Approval name using the Online Approval Tree Definition screen. Depending on the situation, do as shown in the following table:

When Message Issued	User Response
During initialization of the Control-D monitor and Printers Control monitor	Issue a LOADTREE operator command to load in the new Approval Tree.
When entering the Online User Report List screen	Exit from the Control-D Online Facility, and reenter the Online Facility.
The KeyStroke Language	Rerun the job.
When the Control-D operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When the IOAOMON1 operator command LOADTREE was issued	Reenter the LOADTREE operator command.
When IOAOMON1 is initialized	Issue a LOADTREE operator command for IOAOMON1.
When saving an edited tree	Correct the tree and resave.
When executing a CHECK command to verify the tree	Correct the tree and reissue the command.

TRE185I APPROVAL TREE CHECK ENDED SUCCESSFULLY. n APPROVALS

Explanation: This information message request is generated by the CHKTREE command. The Approval tree was checked and no errors were found. The number of Approval names in the tree is displayed.

Corrective Action: No action is required.

Parent Topic

TRE messages