Messages SNMA00 through SNMAxx

This group includes messages for the Control-M for z/OS, Control-M/Assist, Control-M/Links for z/OS, and Control-M/Restart products.

SNMA01W LENGTH OF SNMP MESSAGE EXCEEDED ALLOWED MAXIMUM(70), MESSAGE TRUNCATED

Explanation: An attempt was made to send an SNMP message the length of which exceeded the permitted maximum.

The length of an SNMP message must not exceed 70 characters.

The problematic SNMP message is truncated. Processing continues.

Corrective Action: Correct the rule that created the problematic message.

SNMA02E INVALID IP ADDRESS SPECIFIED IN HOST PARAMETER: ipAdd.

Explanation: The SNMP interface encountered a syntax error in the IP address specified in the HOST parameter.

In this message, ipAdd is the identity of the problematic IP address.

The entry in the SNMP Destination table that contains the invalid IP address is disabled. Processing continues.

Corrective Action: Correct the problematic IP address in the SNMP Destination table and issue a NEWSNMPDST modify command.

SNMA03S FAILURE TO READ SNMP DESTINATION TABLE, RC(rc) REASON(rsn)

Explanation: A severe error occurred when the SNMP interface was trying to read the SNMP Destination table from the IOA PARM library.

The variables in this message are:

rc - the return code that indicates the nature of the failure
rsn - a reason code that provides more information about the failure

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA04S INSUFFICIENT MEMORY TO READ SNMP DESTINATION TABLE

Explanation: A severe error occurred when the SNMP interface was trying to read the SNMP Destination table from the IOA PARM library.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA06E FAILURE TO RECOGNIZE THE LINE

Explanation: The SNMP interface failed to recognize a line in the SNMP Destination table. The sequential number of the problematic line is identified in the SNMA0NI message that precedes this SNMA06E message.

The problematic line in the SNMP Destination table is ignored. Processing continues.

Corrective Action: Correct the problematic line in the SNMP Destination table and issue a NEWSNMPDST modify command.

SNMA07S SNMP DESTINATION TABLE IS EMPTY

Explanation: The SNMP interface discovered that the SNMP Destination table does not contain any lines.

SNMP interface processing is discontinued.

Corrective Action: Fill the SNMP Destination table by adding lines and issue a NEWSNMPDST modify command.

SNMA09I SNMP DESTINATION TABLE processed result

Explanation: The SNMP interface successfully read and processed the SNMP Destination table.

The variables in this message are:

processed - the type of action Valid values are:
PROCESSED - The SNMP Destination table was read and processed when the SNMP interface was called for the first time.
REFRESHED - The SNMP Destination table was successfully refreshed in memory when the NEWSNMPDST Modify command was issued.
result - the result of the processingValid values are:
SUCCESSFULLY - The SNMP Destination table was read and processed successfully.
WITH ERRORS - Errors were encountered during the reading or processing of the SNMP Destination table.

Corrective Action: No action is required.

SNMA0AE FAILURE TO PROCESS SNMP DESTINATION TABLE, RC(rc) REASON(rsn)

Explanation: The SNMP interface failed to process the SNMP Destination table.

The variables in this message are:

rc - the return code that indicates the nature of the failure
rsn - a reason code that provides more information about the failure

SNMP interface processing is discontinued.

Corrective Action: Correct the SNMP Destination table and issue a NEWSNMPDST modify command.

SNMA0BE COMMA SHOULD NOT PRECEDE STATEMENT(HOST) IN A GROUP

Explanation: The SNMP interface encountered a syntax error while processing the SNMP Destination table. The sequential number of the problematic line is identified in the SNMA0NI message that precedes this SNMA0BE message.

The entry in the SNMP Destination table identified in the SNMA0NI message is ignored. Processing continues.

Corrective Action: Correct the identified entry in the SNMP Destination table, and issue a NEWSNMPDST modify command.

SNMA0CE COMMA MUST PRECEDE DEFINITION(PORT)

The PORT definition can only be used together with the HOST definition.

The entry in the SNMP Destination table identified in the SNMA0NI message is ignored. Processing continues.

Corrective Action: Correct the SNMP Destination table entry identified in the SNMA0NI message, and issue a NEWSNMPDST modify command.

SNMA0DE PARAMETER(parm) IS INVALID, ENTRY DISABLED

Explanation: An error was found in the parm parameter of the SNMP Destination table. The sequential number of the problematic line is identified in the SNMA0NI message that precedes this SNMA0DE message.

In this message, valid values for parm are:

PORT
HOST

The entry in the SNMP Destination table identified in the SNMA0NI message is ignored. Processing continues.

Corrective Action: Correct the identified entry in the SNMP Destination table, and issue a NEWSNMPDST modify command.

SNMA0EE UNDEFINED NICK=nick SPECIFIED IN GROUP=grp, ENTRY DISABLED

Explanation: A group of recipients in the SNMP Destination table refers to a nickname statement that is not defined in the nicknames section of the Destination Table.

The variables in this message are:

nick - the undefined nickname
grp - the name of the group that contains nick

The entry in the SNMP Destination table that contains grp is ignored. Processing continues.

Corrective Action: Correct the problematic entry in the SNMP Destination table, and issue a NEWSNMPDST modify command.

SNMA0FE INVALID HOST VALUE SPECIFIED IN defn=host_val, ENTRY DISABLED

Explanation: An invalid HOST value was discovered in the definition identified in the message.

The variables in this message are:

defn - the identity of the definition that contains the invalid HOST valueValid values are:
- NICK
- GROUP
host_val - the invalid HOST value

The entry in the SNMP Destination table that contains the invalid HOST value is ignored. Processing continues.

Corrective Action: Correct the problematic HOST value and issue a NEWSNMPDST modify command.

SNMA0GE stmt STATEMENT BELONGS TO NEITHER NICK NOR GROUP

Explanation: The identified statement in the SNMP Destination table is not a NICK statement, nor does it belong to any group.

In this message, stmt is the problematic statement. Valid values are:

HOST
PORT

The identified entry in the SNMP Destination table is disabled. Processing continues.

Corrective Action: Correct the identified entry in the SNMP Destination table and issue a NEWSNMPDST modify command.

SNMA0HE NICK STATEMENT MUST CONTAIN HOST DEFINITION, ENTRY DISABLED

Explanation: The identified NICK statement in the SNMP Destination table does not contain a HOST definition.

A NICK statement in a SNMP Destination table must contain a HOST definition.

The identified entry in the SNMP Destination table is disabled. Processing continues.

Corrective Action: Correct the identified entry in the SNMP Destination table and issue a NEWSNMPDST modify command.

SNMA0LS MODE=mode CALL CAN BE ISSUED AFTER MODE=INIT ONLY

Explanation: The SNMP interface encountered a severe internal error.

In this message, mode is the mode of the invalid call that was found. Valid values are:

SEND
LOAD
CLOSE

SNMP interface processing is discontinued.

Corrective Action: Note the value of mode and contact BMC Customer Support.

SNMA0MS INSUFFICIENT MEMORY(mem_size), FAILURE TO GETMAIN area

Explanation: The SNMP interface failed to acquire the storage necessary to create an area in memory of the size requested.

The variables in this message are:

mem_size - the requested size of area
area - the name of the requested area in memory

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0NI ERROR DETECTED IN SNMP DESTINATION TABLE, LINE=lineNum:

Explanation: This message precedes other messages, and identifies by number the line in which an error was detected.

In this message, lineNum is the number of the problematic line.

Corrective Action: Correct the problematic line in the SNMP Destination table, and issue a NEWSNMPDST modify command.

SNMA0OS FAILURE TO LOAD MODULE(modName)

Explanation: The SNMP interface encountered a severe error. The specified load module was not found in the IOA LOAD library.

In this message, modName is the name of the load module that could not be loaded.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0PS INTERNAL ERROR, INVALID OR MISSING MCT ADDRESS

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0QS INTERNAL ERROR, INVALID OR MISSING SNMV ADDRESS

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0RS FAILURE TO REFRESH SNMP DESTINATION TABLE

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0SS SNMP DESTINATION TABLE IS UNAVAILABLE

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0TS IOASNMC failed, SNMV vector is not initialized

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0UW INVALID PORT VALUE SPECIFIED, DEFAULT 162 IS USED

Explanation: An invalid port number was specified in the SNMP Destination table.

The default SNMP trap port number, 162, is assigned instead of the invalid port number.

Corrective Action: Correct the line in the SNMP Destination table that contains the problematic port number, and issue a NEWSNMPDST modify command.

SNMA0WS MISSING SNMP MESSAGE LENGTH

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0XS SNMP MESSAGE WAS NOT SPECIFIED

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0YS INTERNAL ERROR, INVALID OR MISSING MCT ADDRESS

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

SNMA0ZS INTERNAL ERROR, INVALID OR MISSING SNMV ADDRESS

Explanation: The SNMP interface encountered a severe internal error.

SNMP interface processing is discontinued.

Corrective Action: Contact BMC Customer Support.

Parent Topic

SNM messages