Messages RSCA00 through RSCAxx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

RSCA50I MISSION misName ODATE=modate TIMESTAMP=misTime WAIT FOR ANOTHER RESTORE/CTDDELRP TO TERMINATE

Explanation: This information message indicates that the restore job executing the misName mission has been suspended until the CTDDELRP utility or another restore job being executed finishes.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission

Corrective Action: No action is required.

RSCA51W MISSION misName ODATE=modate TIMESTAMP=misTime NO APPROPRIATE RESTORE REQUEST FOUND ON HIS/MIG FILE

Explanation: The restore job did not find any restore request assigned to the mission being executed.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission

The restore mission ends NOTOK.

Corrective Action: No action is required.

RSCA52E MISSION misName ODATE=modate TIMESTAMP=misTime FAILED TO UPDATE THE MISSION STATUS. RC=rc

Explanation: The restore job failed to update status of the restore mission that it executed.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission
• rc - the return code passed back from the program that processed the Active Mission file.

The restore mission remains in RESTORE IN PROCESS status.

Corrective Action: Call your INCONTROL Administrator.

RSCA53E "FE" PRINT SUPPORT ERROR. RETURN CODE rc

Explanation: An executing Restore Mission failed to created or update an internal Printing Mission record in the Active User Report file.

When a record with status WAITING FOR PRINT is restored, the Control-D Decollation monitor writes an internal Printing Mission record to indicate that there are reports waiting to be printed by the Printing Mission specified in the DO PRINT parameter. These records are produced with the following key:

X’FE’,C’PRINTMS’,Printing-Mission-Name. rc is the return code from routine CTDXRP.

The Restore Mission restores the reports but terminates with NOTOK status. The restored reports will not be selected by any Printing Mission whose name is specified in Decollation Mission parameter DO PRINT.

Corrective Action: These reports can be manually scheduled for Deferred Printing by using line command P to display the Print Window under option U and then specifying the Printing Mission name. If the problem persists, report the return code to BMC Customer Support.

RSCA53W MISSION misName ODATE=modate TIMESTAMP=misTime FAILED IN PRINTING MANAGEMENT. RC=rc

Explanation: The restore job successfully restored reports assigned to the executed mission, but failed to assign those of them which have not yet been printed to the corresponding print missions.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission
• rc - the return code passed back from the program that manages the print requests.

Corrective Action: Use the CTDBLXRP utility to reset the print requests management.

RSCA54I RSTRESET PROCESSING STARTED

Explanation: This information message denotes the normal start of the RSTRESET Control-D utility.

The RSTRESET utility changes the status of all active restore missions to ENDED NOT OK, and changes the status of all reports selected for restoring to BACKED UP.

Corrective Action: No action is required.

RSCA55I RSTRESET PROCESSING ENDED

Explanation: This information message indicates that the RSTRESET Control-D utility ended normally.

Corrective Action: No action is required.

RSCA56E MISSION misName ODATE=modate TIMESTAMP=misTime CANNOT CONTINUE WORKING

Explanation: : This message indicates that due to an error that occurred when processing the User Reports file, the restore job cannot continue. The detailed description of the error is given in the previous displayed message CTD908S.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission

The restore mission ends NOTOK.

Corrective Action: Call your INCONTROL Administrator.

RSCA57W FAILED TO ASSIGN REPORT FOR PRINTING: ID=recordIdjobname/recipient/report

Explanation: The restore job successfully restored the specified report, but failed to assign it to a print mission.

The variables in this message are:

• recordId - the internal database identifier of the report
• jobname - the name of the job that created the report
• recipient - the user for whom the report was created
• report - the name of the report

Corrective Action: Use the CTDBLXRP utility to reset the print requests management.

RSCA58S OPEN OF ACTIVE MISSIONS FILE FAILED.

Explanation: The CTDRESET utility has failed to open the Active Mission file.

The utility does not reset reports restore processing.

Corrective Action: Call your INCONTROL Administrator.

RSCA59I RESTORE MISSION misName ODATE=modate TIMESTAMP=misTime IS RESET

Explanation: This information message indicates that the CTDRESET utility successfully reset the pending restore mission.

The variables in this message are:

• misName - the name of the restore mission
• modate - the original scheduling date of the restore mission
• misTime - the time stamp of the restore mission

Corrective Action: No action is required.

RSCA5AI REPORT: ID=recordIdjobname/recipient/report IS RESET TO STATUS 'WAIT RESTORE / BACKED UP'

Explanation: This information message indicates that the CTDRESET utility reset the status of the report to WAIT RESTORE or to BACKED UP in correspondence with parameter specified in the utility call.

The variables in this message are:

• recordId - the internal database identifier of the report
• jobname - the name of the job that created the report
• recipient - the user for whom the report was created
• report - the name of the report

Corrective Action: No action is required.

RSCA5BI RESTORE RESET PROCESSING TERMINATED

Explanation: Due to a severe error during the execution of the CTDRESET utility, its execution has terminated. The detailed description of the error is given in the previous displayed messages.

The utility did not reset reports restore processing.

Corrective Action: Call your INCONTROL Administrator.

RSCA5CE MISSION misName ODATE=misoDate TIMESTAMP=misTime FAILED TO UPDATE ITS STATUS (SECURITY VIOLATION)

Explanation: The restore mission indicated in the message cannot update its status in the Active Mission file because of a security violation.

The mission remains in status IN PROCESS.

Corrective Action: Perform the following actions:

1. Run the CTDRESET utility to reset the mission status.
2. Correct the security rules related to the restore mission job.
3. Rerun the mission.

RSCA5DE MISSION misName ODATE=misoDate TIMESTAMP=misTime FAILED TO UPDATE ITS STATUS (UPDATE QUEUE OVERFLOW)

Explanation: The restore mission indicated in the message cannot update its status in the Active Mission file because of update queue overflow in the Active Mission file service.

The mission remains in status IN PROCESS.

Corrective Action: Perform the following actions:

1. Run the CTDRESET utility to reset the mission status.
2. If the mission ended NOTOK, rerun the mission.

RSCA5EE STATUS OF MISSION misName ODATE=misoDate TIMESTAMP=misTime CANNOT BE RESET (RC=rc)

Explanation: where rc is the return code of the Active Mission file service.

Utility CTDRESET cannot reset, in the Active Mission file, the status of the mission indicated in the message.

The mission remains in status IN PROCESS.

Corrective Action: Prepare the IOA LOG and contact BMC Customer Support.

RSCA5FE STATUS OF MISSION misName ODATE=misoDate TIMESTAMP=misTime CANNOT BE RESET (SECURITY VIOLATION)

Explanation: Utility CTDRESET cannot reset the status of the mission indicated in the message because of a security violation.

The mission remains in status IN PROCESS.

Corrective Action: Perform the following actions:

1. Correct the security rules related to the utility job.
2. Rerun the utility.

RSCA5QE STATUS OF MISSION misName ODATE=misoDate TIMESTAMP=misTime CANNOT BE RESET (UPDATE QUEUE OVERFLOW)

Explanation: Utility CTDRESET cannot reset the status of the mission indicated in the message overflow because of the update queue in the Active Mission file service.

The mission remains in status IN PROCESS.

Corrective Action: Perform the following actions:

1. Rerun the utility.
2. If the problem recurs, prepare the IOA LOG and contact BMC Customer Support.