Messages MPR900 through MPR9xx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

MPR980S monName LOAD OF CONTROL-D SPECIAL ROUTINES FAILED

Explanation: Highlighted, unrollable message.

Initialization of the monName Printers Control monitor failed because of missing modules.

The Control-D Printers Control monitor and the Control-D monitor will shut down.

Corrective Action: Determine who deleted the missing load modules and why. Restore these modules from a backup tape of the IOA Load library, and bring up the Control-D monitor.

MPR981S proc RECIPIENT TREE WAS NOT LOADED BECAUSE OF ERROR – CONTROL-D PRINTERS CONTROL MONITOR IS TERMINATING

Explanation: Highlighted, unrollable message.

The Recipient Tree was not loaded because of an error.

The Control-D Printers Control monitor and the Control-D monitor will shut down.

Corrective Action: Look at the IOA Log and the computer log for additional error messages. These additional messages pinpoint the specific problem encountered while loading the Recipient Tree.

MPR982I monName CONTROL-D PRINTER MONITOR IS WAITING FOR ONE OR MORE PRINT SUBTASKS TO TERMINATE

Explanation: This information message indicates that a shutdown process command was issued from the Control-D monitor, but the Control-D Printers Control monitor is still printing.

The Printing Mission that is still printing can be found in the Active Missions Status screen.

If the Printers Control monitor is still printing when a shutdown request is issued, it continues to print. The Control-D monitor does not shut down until printing is finished.

Corrective Action: If you allow the Printing Mission to finish printing, no action is required.

To shut down the Control-D monitor immediately, change the status of the active Printing Mission in the Active Missions Status screen (AMS) to HOLD. Free it after the Control-D monitor has restarted.

MPR983E monName CONTROL-D PRINTER MONITOR IS TERMINATING EVEN THOUGH ONE OR MORE PRINT SUBTASKS HAS NOT TERMINATED

Explanation: Highlighted, unrollable message.

The Control-D monitor is shutting down the Control-D Printers Control monitor monName.

The Control-D monitor issued a command to shut down the Printers Control monitor monName. The Printers Control monitor was not shut down because one or more print subtasks were awaiting completion. Under certain circumstances, the Control-D monitor forces shutdown of the Printers Control monitor after a default site-specific length of time.

The Control-D Printers Control monitor monName shuts down.

Corrective Action: No action is required.

MPR98AI PRINT MISSION POSTPONED. MAX NUMBER OF SUBTASKS IS REACHED IN THE CURRENT MONITOR

Explanation: This information message indicates that the current print mission cannot be processed because the print monitor is already processing the maximum number of missions as defined in optional wish WD2618.

The print mission is delayed until one of the missions being processed terminates.

Corrective Action: If this message appears frequently, it is recommended to increase the maximum number of print missions the print monitor can process concurrently.

MPR98BI PRINT MISSION CONTINUES PROCESSING

Explanation: This information message indicates that the print monitor resumed processing a mission that was postponed (see message MPR98AI)

Corrective Action: No action is required.