|
|
|
|
|
This group includes messages for the IOA (infrastructure) product.
Explanation: An attempt was made to reference device deviceId, which currently is not assigned to media mediaName. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more details, refer to the section that describes the IOA Archive Server in the Control-D and Control-V User Guide. Issue a DISPLAY command to obtain information about each media and its resources that are known to the IOA Archive Server. Reissue the MODIFY operator command with the correct deviceId number.
Explanation: An attempt was made to stop device deviceId, which is currently inactive. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: No action is required.
Explanation: An attempt was made to start device deviceId, which is currently active.
This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: No action is required.
Explanation: Highlighted, unrollable message.
Media mediaName cannot complete the initialization phase.
During initialization, the media waits for devices which have been started to complete their initialization process. No responses were received from these devices. Each “cycle” is one IOA Archive Server sleeping interval whose value (in hundredths of a second) is defined in the INTERVAL parameter in the IOASPRM member in the IOA Archive Server Installation Parameters.
The initialization of media mediaName is not completed.
Corrective Action: Check the IOA Log file and the system log for the cause of the problem. If media mediaName waits a long time for devices to complete initialization and the reason for the delay cannot be determined, issue a CANCEL operator command to stop the IOA Archive Server. Start the IOA Archive Server again. If the problem is not resolved, contact BMC Customer Support.
Explanation: The initialization process for all devices assigned to media mediaName failed.
Media mediaName is terminated and becomes unavailable for use by the IOA Archive Server.
Corrective Action: Check the IOA Log file and system log for messages about the initialization failure. Issue an operator command to restart media mediaName. If the problem is not resolved, contact BMC Customer Support.
Explanation: Highlighted, unrollable message.
Media mediaName cannot complete the termination phase.
During termination, media mediaName waits for devices to terminate. Each “cycle” is one IOA Archive Server sleeping interval whose value (in hundredths of a second) is defined in the INTERVAL parameter in the IOASPRM member in the IOA Archive Server Installation Parameters.
The termination of media mediaName is not completed.
Corrective Action: Check the IOA Log file and the system log for the cause of the problem. If media mediaName waits a long time for devices to complete termination and the reason for the delay cannot be determined, issue a CANCEL operator command stop the IOA Archive Server. If the problem is not resolved, contact BMC Customer Support.
Explanation: The DEVICE parameter was specified with an invalid length. The length of the DEVICE parameter in the MODIFY operator command should be:
This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: Reissue the MODIFY command with a correct DEVICE parameter.
Explanation: An invalid command or parameter was passed to media mediaName by a MODIFY operator command. This message is followed by other messages that clarify why the operator command failed.
The MODIFY command is not executed.
Corrective Action: Check the system log for a message that indicates why the command failed. Correct the problem, and reissue the MODIFY operator command.
Explanation: An invalid parameter was passed to media mediaName by the MODIFY operator command. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more information, refer to the section on the IOA Archive Server in the Control-D and Control-V User Guide. Enter a MODIFY command with valid parameters.
Explanation: This information message indicates that media mediaName is shutting down upon the operator’s request.
Corrective Action: No action is required.
Explanation: This information message indicates that media mediaName is shutting down upon the IOA Archive Server’s request.
Possible causes are:
The IOA Archive Server shuts down the media before it shuts down. The IOA Log file and system log should contain additional messages concerning the situation.
Media mediaName shuts down.
Corrective Action: Check the IOA Log file and system log for messages explaining the situation. Contact the system programmer for assistance, if needed.
Explanation: The DEVICE parameter was specified in a MODIFY operator command without specifying its value. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
MODIFY is not executed.
Corrective Action: For more information, refer to the section on the IOA Archive Server in the Control-D and Control-V User Guide. Reissue the MODIFY command with a valid DEVICE parameter.
Explanation: An attempt to start a specific device by operator command failed because the devices used by the IOA Archive Server are allocated dynamically. This message follows message IOA137E/MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
MODIFY is not executed.
Corrective Action: For more information about how to control the device, refer to the section on media and resource management in the Control-D and Control-V User Guide. Reissue the MODIFY command with appropriate parameters.
Explanation: An attempt to start one or more devices by issuing a MODIFY operator command failed, because all devices were already active.
This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command. The operator cannot increase the number of devices the IOA Archive Server can use to more than the maximum quantity defined in the IOASPRM member in the IOA Archive Server Installation Parameters.
The MODIFY command is not executed.
Corrective Action: Issue a DISPLAY command to get information about each media and its resources that are allocated to the IOA Archive Server. For more information about how to control devices, refer to the section on media and resource management in the Control-D and Control-V User Guide.
Explanation: Initialization of the mediaName media failed.
Possible causes are:
The IOA Archive Server shuts down.
Corrective Action: Check the system log for additional messages which clarify the situation. Try one of the following:
Explanation: This information message indicates that media mediaName has started and is building the required internal environment.
Corrective Action: No action is required.
Explanation: This information message indicates that media mediaName was successfully initialized.
Corrective Action: No action is required.
Explanation: An attempt to stop one or more devices by issuing a MODIFY operator command failed, because all the devices were already inactive. This message follows message IOA137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more information, refer to the section on the IOA Archive Server in the Control-D and Control-V User Guide. Issue a DISPLAY command to get information about each media and its resources that are allocated to the IOA Archive Server.
Explanation: Highlighted, unrollable message.
Insufficient memory is available to initiate media mediaName.
Media mediaName shuts down. The IOA Archive Server shuts down.
Corrective Action: Increase the IOA Archive Server REGION size.
Explanation: Highlighted, unrollable message.
Media mediaName encountered an internal error.
The media mediaName task terminates with user abend 0007. The IOA Archive Server terminates with user abend code 0006. The output includes a dump of the abend.
Corrective Action: Contact your system programmer for assistance. If the problem is not resolved, contact BMC Customer Support.
Explanation: Highlighted, unrollable message.
Media mediaName encountered an internal error.
This message is preceded by other messages which clarify the situation.
Media mediaName shuts down.
Corrective Action: Check the IOA Log file and the system log for messages describing the error. Contact your system programmer for assistance, if needed. If the problem is not resolved, contact BMC Customer Support.
Explanation: Highlighted, unrollable message.
Media mediaName encountered an internal error.
Media mediaName abends with user abend 0007. The IOA Archive Server shuts down with User Abend 0006. The output includes a dump of the abend.
Corrective Action: Contact your system programmer for assistance. If the problem is not resolved, contact BMC Customer Support.
Explanation: Media mediaName encountered an internal error.
One of the following actions occurs, depending on severity of the internal error:
Corrective Action: Check the IOA Log file and system log for messages describing the error. Contact your system programmer for assistance. If the problem is not resolved, report the value of rc to BMC Customer Support.
Explanation: An invalid command was passed to media mediaName by the MODIFY operator command. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command.
The MODIFY command is not executed.
Corrective Action: For more information, refer to the section on the IOA Archive Server in the Control-D and Control-V User Guide. Enter a valid MODIFY command.
Explanation: An invalid value was specified for the DEVQTY parameter. This message follows message IOA137E or MDT137E, which indicates that operator command MODIFY failed and contains the text of the failed command. Possible causes are:
The MODIFY command is not executed.
Corrective Action: For more information, refer to the section on the IOA Archive Server in the Control-D and Control-V User Guide. Issue a DISPLAY command to get information about each media and its resources that are allocated the IOA Archive Server. Reissue the MODIFY command with a valid DEVQTY parameter.
Explanation: A CDAM data set cannot be found in the catalog.
The user requested a report which resides on a CDAM file which is uncataloged or does not exist.
The request is ignored.
Corrective Action: Catalog the file or take other corrective action and try again.
Explanation: This information message indicates that media mediaName is shutting down.
Corrective Action: No action is required.
Explanation: A media internal subtask abended.
Media mediaName issues an implicit start command for device deviceId. Attempts are made to initialize this device and continue normal processing. If these attempts fail, media mediaName sets the status of the designated device to never active and this device becomes unavailable for use by the IOA Archive Server.
Corrective Action: Check the IOA Log file and system log for additional messages which indicate why device deviceId abended.
Explanation: The DEVADDR parameter contains an invalid value.
The format of the device number specified in the DEVADDR parameter in the IOASPRM member (IOA Archive Server Installation Parameters) must be:
Initialization of media mediaName fails. The IOA Archive Server shuts down with a return code of 08.
Corrective Action: Set the DEVADDR parameter to a valid numeric value and restart the IOA Archive Server.
Explanation: This information message indicates that mediaName is inactive because all devices which belong to it are defined as inactive in the IOASPRM member (IOA Archive Server Installation Parameters).
Corrective Action: If necessary, issue operator MODIFY commands to start the media and the devices.
Parent Topic |