Messages IOAB00 through IOABxx

This group includes messages for the IOA (infrastructure) product.

IOAB10E INTERNAL ERROR - INVALID TYPE

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB11E INTERNAL ERROR - PREVIOUS WORK AREAS NOT FREE

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB12E ERROR TRYING TO READ FORMAT MEMBER

Explanation: An error occurred while reading a Display Type definition member. The required format member, $$xxx, probably does not exist in the MSG library.

The User Report List is not displayed.

Corrective Action: Make sure that the required format member, $$xxx, exists in the MSG library.

IOAB13E INTERNAL ERROR - MEMORY ALLOCATION FAILED

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB14I INVALID DEFINITION OF "ID=" KEYWORD

Explanation: This information message indicates that an invalid value for the ID keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. For more information, see the INCONTROL for z/OS Installation Guide.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the ID keyword in the Display Type definition member.

IOAB15I INVALID DEFINITION OF "LTH=" KEYWORD

Explanation: This information message indicates that an invalid value for the LTH keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. For more information, see the INCONTROL for z/OS Installation Guide.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LTH keyword in the Display Type definition member.

IOAB16I VALUE OF "LTH=" KEYWORD NOT NUMERIC

Explanation: This information message indicates that a non-numeric value for the LTH keyword was specified in the Display Type definitions member. The LTH keyword must contain numeric characters only and a non-numeric character was detected. For more information, see the INCONTROL for z/OS Installation Guide.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LTH keyword in the Display Type definition member to a numeric value.

IOAB17E INTERNAL ERROR (FFU)

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB18E INTERNAL ERROR IN GETSTL

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB19I INVALID DEFINITION OF "LINES=" KEYWORD

Explanation: This information message indicates that an invalid value for the LINES keyword was specified in the Display Type definition member. The lines before this error message contain the problematic entry. Check the keyword in these lines for the invalid value. For more information, see the INCONTROL for z/OS Installation Guide.

The display type definitions syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LINES keyword in the Display Type definition member.

IOAB1AI VALUE OF "LINES=" KEYWORD NOT NUMERIC

Explanation: A non-numeric value for the LINES keyword was detected in the Display Type definitions member. The LINES keyword must contain numeric characters only and a non-numeric character was detected. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LINES keyword in the Display Type definition member to a numeric value.

IOAB1BI VALUE OF "LTH=" KEYWORD NOT 80 OR 132

Explanation: An invalid value for the LTH keyword was specified in the Display Type definition member. Valid values for the LTH keyword are 80 or 132. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LTH keyword in the Display Type definition member to 80 or 132.

IOAB1CI THIS FORMAT ALREADY EXISTS

Explanation: The specified type ID, TYPE and CLASS combination was previously defined on a @STYLE line in the Display Type definition member. A Display Type ID cannot be defined twice. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Change one of the Display Type IDs, or delete one of the Display Types.

IOAB1DE INTERNAL ERROR IN GETHDR

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB1EI NO CURRENT VALID STYLE

Explanation: A @HEADER line was specified, but no valid preceding @STYLE exists. A @STYLE line must exist when a @HEADER line is specified. See the INCONTROL for z/OS Installation Guide for more information.

The display type definition syntax check bypasses the current @HEADER line.

Corrective Action: Add the @STYLE keyword or delete the @HEADER keyword in the Display Type definition member.

IOAB1FE INTERNAL ERROR IN GETLNE

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB20I INVALID VALUE FOR "NAME=" KEYWORD

Explanation: An invalid value for the NAME keyword was detected in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the NAME keyword in the Display Type definition member.

IOAB21I FIELD CANNOT BE "DATA" AND "NAME"

Explanation: Both DATA and NAME keywords were specified on a @FIELD line, in the Display Type definition member. DATA and NAME keywords cannot be specified on the same @FIELD line. See the INCONTROL for z/OS Installation Guide for information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Delete either the DATA or the NAME keyword from the @FIELD line in the Display Type definition member.

IOAB22I FIELD IS NOT "DATA" OR "NAME"

Explanation: Neither DATA nor NAME keywords were specified on a @FIELD line, in the Display Type definition member. Either DATA or NAME keyword must be specified on a @FIELD line. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Add either the DATA or the NAME keyword to the @FIELD line in the Display Type definition member.

IOAB23E INTERNAL ERROR - ALLOCATION FAILED FOR "DATA"

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB24E INTERNAL ERROR IN GETFLD

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB25E INTERNAL ERROR - ALLOCATION FAILED FOR "DFLT"

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB26I NO CURRENT VALID LINE

Explanation: A @FIELD line was specified, but no valid preceding @LINE exists. When a @FIELD line is specified, a @LINE must precede it. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Add a @LINE after the @FIELD line or delete the @FIELD line in the Display Type definition member.

IOAB27I FIELD IS NOT EDITABLE

Explanation: The EDIT=YES keyword was specified on a field that is not editable in the Display Type definition member. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Delete the EDIT=YES keyword for this field in the Display Type definition member.

IOAB28I FIELD IS NOT DEFAULT-EDITABLE

Explanation: The DFLTEDIT=YES keyword was specified on a field that is not editable in the Display Type definition member. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Delete the DFLTEDIT=YES keyword for this field in the Display Type definition member.

IOAB29I VALUE OF "LTH=" KEYWORD IS AT LEAST 2

Explanation: An invalid value for the LTH keyword was detected in the Display Type definition member. The value for the LTH keyword should be at least 2, to accommodate the attribute byte and a data byte. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the LTH keyword value to at least 2 in the Display Type definition member.

IOAB2AI FIELD STARTS AFTER END OF LINE

Explanation: The current field starts after the logical end of line. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the current field start in the Display Type definition member.

IOAB2BI FIELD ENDS AFTER END OF LINE

Explanation: The current field ends after the logical end of line. See the section on customizing IOA display format members in the INCONTROL for z/OS Administrator Guide.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the current field end in the Display Type definition member.

IOAB2CI INVALID DEFINITION OF "DFLT=" KEYWORD

Explanation: An invalid value for the DFLT keyword was detected in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the DFLT keyword in the Display Type definition member.

IOAB2DI INVALID DEFINITION OF "DATA=" KEYWORD

Explanation: An invalid value for the DATA keyword was detected in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the DATA keyword in the Display Type definition member.

IOAB2EI INVALID DEFINITION OF "NAME=" KEYWORD

Explanation: An invalid value for the NAME keyword was detected in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the NAME keyword in the Display Type definition member.

IOAB30I INVALID DEFINITION OF "DLM=" KEYWORD

Explanation: An invalid value for the DLM keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @DLM line.

Corrective Action: Correct the invalid value for the DLM keyword in the Display Type definition member.

IOAB31I INVALID DEFINITION OF "COLOR=/COLORA=" KEYWORD

Explanation: An invalid value for the COLOR or COLORA keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the invalid value specified for the COLOR or COLORA keyword in the Display Type definition member.

IOAB32I INVALID VALUE FOR "COLOR=/COLORA=" KEYWORD

Explanation: An invalid value for the COLOR or COLORA keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the invalid value specified for the COLOR or COLORA keyword in the Display Type definition member.

IOAB33I INVALID DEFINITION OF "HIGH=/HIGHA=" KEYWORD

Explanation: An invalid value for the HIGH or HIGHA keyword was specified in the Display Type definition member. The lines preceding this message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the invalid value specified for the HIGH or HIGHA keyword in the Display Type definition member.

IOAB34I INVALID VALUE FOR "HIGH=/HIGHA=" KEYWORD

Explanation: An invalid value for the HIGH or HIGHA keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the invalid value specified for the HIGH or HIGHA keyword in the Display Type definition member.

IOAB35I FORMAT CANNOT HAVE A BLANK ID

Explanation: The specified type ID has a blank value. The Display Type ID cannot be defined with a blank value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Enter a Display Type ID value other than blank.

IOAB36I INVALID DEFINITION OF "PREF=" KEYWORD

Explanation: An invalid value for the PREF keyword was specified in the Display Type definition member. The lines before this message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the PREF keyword in the Display Type definition member.

IOAB37I INTERNAL ERROR - ALLOCATION FAILED FOR "PREF"

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB38I PREFIX LENGTH TOO LONG - MUST LEAVE ROOM FOR DATA

Explanation: The specified PREF value is too long. The prefix length should be short enough to accommodate at least one data character in the field. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Shorten the PREF value to accommodate for at least one data character in the field in the Display Type definition member.

IOAB39E LINE TYPE BLANK IS NOT AFTER CONTINUATION MARK

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB3AE INVALID LINE TYPE

Explanation: An invalid line type was specified in the Display Type definition member. In the Display Type definition member, the line type is determined according to the first ten characters of the line. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check stops. The User Report List is not displayed.

Corrective Action: Correct the invalid line type.

IOAB3BE CONTINUATION LINE SHOULD BE WITH BLANK TYPE

Explanation: An internal error occurred during the Display Type definition syntax check.

The User Report List is not displayed.

Corrective Action: Notify BMC Customer Support.

IOAB3CI NUMBER OF LINES IN FORMAT EXCEEDS MAXIMUM. LINE IGNORED

Explanation: Too many lines were specified for the current @STYLE keyword. The number of lines specified for the @STYLE keyword exceeded the maximum number of lines that can be defined. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @LINE line.

Corrective Action: Correct the number of lines in the @STYLE keyword in the Display Type definition member to a value that does not exceed the allowable maximum.

IOAB50I INVALID DEFINITION OF "IDLIKE=" KEYWORD

Explanation: An invalid value for the IDLIKE keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the IDLIKE keyword in the Display Type definition member.

IOAB51I INVALID DEFINITION OF "TYPELIKE=" KEYWORD

Explanation: An invalid value for the TYPELIKE keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the TYPELIKE keyword in the Display Type definition member.

IOAB52I INVALID DEFINITION OF "CLASSLIKE=" KEYWORD

Explanation: An invalid value for the CLASSLIKE keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the CLASSLIKE keyword in the Display Type definition member.

IOAB53I "IDLIKE=", "TYPELIKE=" AND "CLASSLIKE=" MUST ALL BE PRESENT

Explanation: One of the keywords IDLIKE, TYPELIKE or CLASSLIKE, was specified and at least one of the other keywords was not present. When specifying one of the keywords IDLIKE, TYPELIKE or CLASSLIKE, the other two keywords must also be present. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Add the other missing keywords to the Display Type definition member.

IOAB54I INVALID DEFINITION OF "EDIT=" KEYWORD

Explanation: An invalid value for the EDIT keyword was specified in the Display Type definition member. There is an invalid value specified for the EDIT keyword in the Display Type definition member. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the EDIT keyword in the Display Type definition member.

IOAB55I INVALID VALUE FOR "EDIT=" KEYWORD. SHOULD BE YES/NO

Explanation: An invalid value for the EDIT keyword was specified in the Display Type definition member. Valid values for the EDIT keyword are Y, YES, N, or NO. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the EDIT keyword value to Y, YES, N, or NO in the Display Type definition member.

IOAB56I INVALID DEFINITION OF "DEFAULTEDIT=" KEYWORD

Explanation: An invalid value for the DEFAULTEDIT keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the DEFAULTEDIT keyword in the Display Type definition member.

IOAB57I INVALID VALUE FOR "DEFAULTEDIT=" KEYWORD. SHOULD BE YES/NO

Explanation: An invalid value for the DEFAULTEDIT keyword was specified in the Display Type definition member. Valid values for the DEFAULTEDIT keyword are Y, YES, N, or NO. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the DEFAULTEDIT keyword value to Y, YES, N, or NO in the Display Type definition member.

IOAB58I INVALID DEFINITION OF "AFORCE=" KEYWORD

Explanation: An invalid value for the AFORCE keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the AFORCE keyword in the Display Type definition member.

IOAB59I INVALID VALUE FOR "AFORCE=" KEYWORD. SHOULD BE YES/NO

Explanation: An invalid value for the AFORCE keyword was specified in the Display Type definition member. Valid values for the AFORCE keyword are Y, YES, N, or NO. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the AFORCE keyword value to Y, YES, N, or NO in the Display Type definition member.

IOAB5AI INVALID DEFINITION OF "LONG=" KEYWORD

Explanation: An invalid value for the LONG keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LONG keyword in the Display Type definition member.

IOAB5BI INVALID VALUE FOR "LONG=" KEYWORD

Explanation: An invalid value for the LONG keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the LONG keyword in the Display Type definition member.

IOAB5CI INVALID DEFINITION OF "INTENS=" KEYWORD

Explanation: An invalid value for the INTENS keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the invalid value specified for the INTENS keyword in the Display Type definition member.

IOAB5DI INVALID VALUE FOR "INTENS=" KEYWORD. SHOULD BE YES/NO

Explanation: An invalid value for the INTENS keyword was specified in the Display Type definition member. Valid values for the INTENS keyword are Y, YES, N, or NO. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE, @LINE or @FIELD line.

Corrective Action: Correct the INTENS keyword value to Y, YES, N, or NO in the Display Type definition member.

IOAB5EI INVALID DEFINITION OF "KANJI=" KEYWORD

Explanation: An invalid value for the KANJI keyword was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the KANJI keyword in the Display Type definition member.

IOAB5FI INVALID VALUE FOR "KANJI=" KEYWORD. SHOULD BE YES/NO

Explanation: An invalid value for the KANJI keyword was specified in the Display Type definition member. Valid values for the KANJI keyword member are Y (Yes) and N (No).

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the KANJI keyword value to either Y or N in the Display Type definition member.

IOAB60I INVALID DEFINITION OF "SHOWBLINE=" KEYWORD

Explanation: An invalid value for keyword SHOWBLINE was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the SHOWBLINE keyword in the Display Type definition member.

IOAB61I INVALID VALUE FOR "SHOWBLINE=" KEYWORD

Explanation: An invalid value for keyword SHOWBLINE was specified in the Display Type definition member. Valid values for the SHOWBLINE keyword member are Y (Yes) and N (No).

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the SHOWBLINE keyword value to either Y or N in the Display Type definition member.

IOAB62I INVALID DEFINITION OF "OFFSET=" KEYWORD

Explanation: An invalid value for keyword OFFSET was specified in the Display Type definition member. The lines preceding this error message contain the problematic entry. Check the keyword in these lines for the invalid value. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the OFFSET keyword in the Display Type definition member.

IOAB63I VALUE OF "OFFSET=" KEYWORD NOT NUMERIC

Explanation: A non-numeric value for keyword OFFSET was detected in the Display Type definition member. The OFFSET keyword must contain numeric characters only and a non-numeric character was detected. See the INCONTROL for z/OS Installation Guide for more information.

The Display Type definition syntax check bypasses the current @STYLE line.

Corrective Action: Correct the invalid value for the OFFSET keyword in the Display Type definition member to a numeric value.

IOAB64I OFFSET VALUE IS OUT OF BOUNDS

Explanation: The value specified for the OFFSET keyword exceeds the maximum length of the current field. The value of the OFFSET keyword should be less than the length of the field.

The Display Type definition syntax check bypasses the current @FIELD line.

Corrective Action: Correct the invalid value for the current field’s OFFSET keyword in the Display Type definition member.