Messages FTM200 through FTM2xx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

FTM2T0I FILE TRANSFER MONITOR SHUTTING DOWN

Explanation: Highlighted, unrollable message.

This information message indicates that the File Transfer monitor is shutting down.

Corrective Action: No action is required.

FTM2T1S FILE TRANSFER MONITOR ENDED WITH ERROR

Explanation: This information message indicates that the File Transfer monitor ended with an error.

Corrective Action: In the printout of the File Transfer monitor, check the messages which preceded this FTM121S message for an indication of the cause of the error, and take appropriate corrective action.

FTM2T2W FILE TRANSFER MONITOR IS ACTIVE. QNAME "qName"

Explanation: Highlighted, unrollable message.

The user attempted to activate the File Transfer monitor when it was already active. More than one File Transfer monitor cannot be active at the same time.

The new File Transfer monitor is not activated.

Corrective Action: No action is required.

FTM2T5I validModifyParm

Explanation: This information message displays a valid modify parameter that can be used in File Transfer monitor operator commands. It is issued together with the FTM103E message.

Corrective Action: No action is required.

FTM2T8S RECIPIENT TREE WAS NOT LOADED BECAUSE OF ERROR - MONITOR IS TERMINATING

Explanation: The attempt to load the Recipient Tree failed. As part of the initialization process, the File Transfer monitor attempts to load the Recipient Tree.

The File Transfer monitor shuts down.

Corrective Action: Check other messages in the IOA log and JES log to determine why the Recipient Tree could not be loaded. Fix the Recipient Tree. Then try again to start the File Transfer monitor.

FTM2T9S NO RECIPIENTS WERE FOUND WITH IP ADDRESS. MONITOR IS TERMINATING

Explanation: The File Transfer monitor was unable to find a recipient with an IP address.

The File Transfer monitor terminates.

Corrective Action: Contact BMC Customer Support.

FTM2TAS SUBTASK IS TERMINATED BY TIMEOUT FOR IPA =ipAdd.'

Explanation: The subtask has timed out and been terminated.

The monitor main task periodically checks the status of all its subtasks. When the CPU of a subtask has not changed since the last check, the subtask is considered to be inactive ("hanging"), and the main task of the monitor interrupts the subtask.

The subtask is terminated.

Corrective Action: In the printout of the File Transfer monitor, and in the log of your PC session manager, check the messages which preceded this FTM121S message for an indication of the reason why the subtask was left inactive, and take appropriate corrective action.

FTM2TBS SUBTASK IS TERMINATED BY CANCEL REQUEST FOR IPA = ipAdd. PORT = portNumber.

Explanation: The File Transfer monitor subtask with the IP address identified in this message has been terminated by an operator modify CANCEL command.

The identified subtask is terminated.

Corrective Action: No action is required.

FTM2TCS THERE ARE NO ACTIVE SUBTASKS

Explanation: This information message indicates that the File Transfer monitor has no active subtasks.

Corrective Action: No action is required.

FTM2TDS FORMAT OF THE MODIFY COMMAND IS NOT CORRECT

Explanation: An invalid operator modify command has been entered.

The command is rejected.

Corrective Action: Correct and reissue the operator modify command.

For more information, see the File Transfer Monitor section in the Control-D chapter in the INCONTROL for z/OS Administrator Guide.

FTM2TES THE SUBTASK NUMBER IS NOT DIGITAL

Explanation: An invalid subtask number has been specified in an operator modify CANCEL command.

The command is rejected.

Corrective Action: Enter a valid subtask number and reissue the command.

FTM2TFS THE SUBTASK NUMBER EXCEEDS THE TOTAL NUMBER OF THE ACTIVE SUBTASKS

Explanation: The subtask number entered in an operator modify CANCEL command is invalid, because it is greater than the total number of active subtasks.

For more information, see the File Transfer Monitor section in the Control-D chapter in the INCONTROL for z/OS Administrator Guide.

The command is rejected.

Corrective Action: Enter a valid subtask number in the operator modify CANCEL command and reissue the command.

FTM2TGS SUBTASK IS ALREADY NOT ACTIVE FOR IPA = ipAdd PORT = portNumber

Explanation: The File Transfer monitor subtask with the IP address and port number identified in this message is already inactive.

The command is rejected.

Corrective Action: No action is required.

FTM2THS SUBTASK IS TERMINATED BY SUSPEND FOR IPA = ipAdd PORT = portNumber

Explanation: The File Transfer monitor subtask with the IP address and port number identified in this message has been terminated by an operator modify SUSPEND command.

The subtask is terminated.

Corrective Action: No action is required.

FTM2TIS IPA SPECIFIED IN THE CANCEL COMMAND IS NOT CORRECT.

Explanation: An invalid IP address was specified in an operator modify CANCEL command.

The command is rejected.

Corrective Action: Enter a correct IP address in the CANCEL command and reissue the command.

FTM2TJS THE INTERVAL PARAMETER VALUE IS NOT DIGITAL.

Explanation: An invalid File Transfer monitor sleeping interval has been specified in an operator modify command.

The File Transfer monitor sleeping interval must be a 3-digit number from 1 through 999 seconds.

For more information, see the File Transfer Monitor section in the Control-D chapter in the INCONTROL for z/OS Administrator Guide.

The operator modify command is rejected.

Corrective Action: Enter a valid value for the File Transfer monitor sleeping interval and reissue the command.

FTM2TKI THE MODIFY COMMAND cmdText IS ACCEPTED

Explanation: This information message indicates that the cmdText modify command has been accepted by the File Transfer monitor.

Corrective Action: No action is required.