Messages DSP100 through DSP1xx

This group includes messages for the IOA (infrastructure) product.

DSP1A0I mediaName - NUMBER OF DEVICES = iii NUMBER OF ACTIVE DEVICES = jjj

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command to indicate the following:

• iii devices are assigned to media mediaName.
• jjj active devices are assigned to media mediaName.

This message is preceded by message IOA1A1I or DSP1A1I, which supplies the IOA Archive Server name and media name for which the DISPLAY message was issued.

Corrective Action: No action is required.

DSP1A1I server - MEDIA mediaName STATUS DISPLAY:

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. This message is the header for messages that provide information about the status of media mediaName.

Corrective Action: No action is required.

DSP1A2I mediaName - MEDIA TYPE = media_typ SYSTEM UNIT NAME = name

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. This message identifies the media type and system unit name defined in the IOASPRM member in the IOA Archive Server Installation Parameters.

Corrective Action: No action is required.

DSP1A3I mediaName - STATUS = status

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command to provide information about the current status of media mediaName.

Corrective Action: No action is required.

DSP1A4I mediaName - NUMBER OF PENDING REQUESTS = num

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command to provide information about the number of pending requests for media mediaName.

Corrective Action: No action is required.

DSP1A5I mediaName - DEVICE STATUS PLATTER VOLSER DSN

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. It is the header for IOA1A6I or DSP1A6I messages, which provide information about the status of each device assigned to media mediaName.

Corrective Action: No action is required.

DSP1A6I mediaName - device status platter volser dsn

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. Each message describes a device assigned to media mediaName. This message follows message IOA1A5I or DSP1A5I, which provides the header for each field.

Corrective Action: No action is required.

DSP1A7I mediaName - DEVICE USE STATUS USER-ID VOLSER DSN

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. It is the header for IOA1A8I or DSP1A8I messages, which provide information about the status of each device assigned to media mediaName.

Corrective Action: No action is required.

DSP1A8I mediaName - device use status userId volume dsn

Explanation: This information message is sent by the IOA Archive server to the console in response to a DISPLAY command. It follows message IOA1A7I, which provides the header for each field. Each occurrence of this message describes a device assigned to media mediaName.

The variables in this message are:

• device - the name of the assigned device
• use - Dedicated or Dynamic
• status - Active, Inactive or Idle
• userId - the user ID of the owner of the data set being retrieved by the device
• volume - the serial number of the volume on which the data set is found
• dsn - the data set name

Note:

The userId, volume, and dsn fields have values only when the device is active.

Corrective Action: No action is required.

DSP1A9I mediaName - DEVICE STATUS USER-ID DSN

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. This message is the header for message IOA1AAI, which provides information about the status of each device assigned to the media identified in the message.

Corrective Action: No action is required.

DSP1AAI mediaName - deviceStatus userId dsn

Explanation: This information message is sent by the IOA Archive Server to the console in response to a DISPLAY command. Each message provides information about a device assigned to the media identified in the message. A message is issued for each device defined in the MAXCONN parameter in IOASPRM. These messages are preceded by message IOA1A9I, which provides the header for each field.

Possible values of deviceStatus are:

• INACTIVE - Device not yet activated.
• ACTIVE - Retrieving data requested by specified user from specified data set.
• IDLE - Device is ACTIVE, but currently not working on any request.

Corrective Action: No action is required.

DSP1AEI mediaName - TVL: OWNER-ID deviceTask, NUM OF REQUESTS - num DSN dsn

Explanation: This information message displays the content of the TVL, an element in the queue of the retrieval requests for tape mediaName.

The variables in this message are:

• deviceTask - the owner-ID of the device task currently working on the request
• num - the number of pending requests on that tape volume
• dsn - the name of the data set

Corrective Action: No action is required.