Messages CTTE00 through CTTExx

This group includes messages for the Control-M/Tape product.

CTTE15S INSUFFICIENT STORAGE. INCREASE SIZE

Explanation: Insufficient memory to perform the task.

Corrective Action: For jobs, increase the REGION size. For TSO, log on again using a larger SIZE parameter, or exit one of the screens using an END command.

CTTE29S UNABLE TO LOAD MODULE modName

Explanation: Loading of the modName module failed. Possible causes are:

• The IOA Load library is not in the load modules search list.
• There is insufficient storage available to load the module.
• The modName module does not exist in the IOA Load library.
• The IOA Load library was updated while you were working and the position of the modName module has changed.

The function requested is terminated.

Corrective Action: Look on the system log for additional messages that clarify the problem. Suggested actions:

• If the IOA Load library is not in the search list, add a STEPLIB DD statement to the library.
• If the loading failed due to lack of storage then for batch jobs, increase the REGION size, and for TSO, try to log on again using a larger SIZE parameter. If you are using many IOA screens concurrently, try to exit a few using the END command. This can release storage that is used by the screens.
• Add the modName module to the Load library.
• If the IOA Load library was modified and you are working under TSO, try to log on again. If you are working under ROSCOE, you may have to shut down ROSCOE and bring it up again. If the IOA Load library is in the Linklist, a refresh to the LLA is needed.

CTTEDM0 volser FUNC=func RC=rc RSN=rsn URC=ursn FROM CTTAPI

Explanation: The Control-M/Tape interface to the EDM software used CTTAPI to scratch the volser in the Media Database, but CTTAPI ended with an error.

The specified volume is not expired.

Corrective Action: Refer to message CTT203E to understand the explanation for the return codes from CTTAPI.

Check the specified volume status in the Media Database, and if required, expire it online or by means of the CTTMUP utility.

CTTEDM0 {ATTACH | LINK} OF EXIT exitName SUCCESSFUL

Explanation: This information message indicates that the exitName exit was successfully activated. The Control-M/Tape interface to EDM software can call another exit after completion of the expiration process, probably an interface to another tape management system or a second Control-M/Tape version.

Corrective Action: No action is required.

CTTEDM0 {ATTACH | LINK} OF EXIT exitName FAILED

Explanation: Activation of the exitName exit failed. The Control-M/Tape interface to EDM software can call another exit after completion of the expiration process, probably an interface to another tape management system or a second Control-M/Tape version.

The specified exitName exit is not activated.

Corrective Action: When running two Control-M/Tape versions, verify that the exitName exit exists in the load library that is referenced by the parallel DD as described in Appendix D of the IOA Upgrade Guide. When not running two Control-M/Tape versions, verify that the STEPLIB or LINKLIST libraries contain the specified exitName exit. In addition, look for additional MVS errors messages in the job.

CTTEDM0 OPTION opt NOT SUPPORTED

Explanation: CA-Disk exit TMSCTLEX received an unrecognized option.

The Control-M/Tape interface to CA-Disk supports only the Volume Expire option, supplied as option number 1, of this exit. CA-Disk supplies a different option.

No operation is performed. The volume is not expired.

Corrective Action: No action is required.