Messages CTDV00 through CTDVxx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

CTDV00I CTVUPINV UTILITY STARTED

Explanation: This information message indicates that the CTVUPINV utility started.

Corrective Action: No action is required.

CTDV01I CTVUPINV UTILITY COMPLETED SUCCESSFULLY

Explanation: This information message indicates that the CTVUPINV utility completed successfully.

Corrective Action: No action is required.

CTDV02E CTVUPINV UTILITY ENDED WITH ERRORS

Explanation: This error message indicates that the CTVUPINV utility processing was interrupted because of problems. Additional information about the problems is available in the job log.

The utility stops.

Corrective Action: Examine the job log for error messages describing the problem. Make any necessary corrections and rerun the utility.

CTDV03I CTVUPINV UTILITY IS RUNNING IN SIMULATION MODE

Explanation: This information message indicates that the CTVUPINV utility is running in the simulation (TEST) mode. No data will be changed in the Permanent User File. Only an output report will be issued.

Corrective Action: No action is required.

CTDV04E INVALID PARAMETER: parm

Explanation: The parm input parameter specified in the JCL for the CTVUPINV utility is not valid.

The utility stops.

Corrective Action: Correct the invalid parm input parameter in the JCL and rerun the job.

CTDV05E INVALID PARAMETER IN CTDSPARM: parm

Explanation: The parm input parameter in the CTDSPARM member that specifies a default destination value for printing subscribed reports is not valid.

The utility stops.

Corrective Action: Correct the invalid parm input parameter in the CTDSPARM member and rerun the job.

CTDV06E REDUNDANT PARAMETER: parm

Explanation: The parm input parameter of the CTVUPINV utility has already been specified. The parameter can validly be specified only once in the current statement.

The utility stops.

Corrective Action: Remove the extra input parameter from the input parameter stream in JCL and rerun the job.

CTDV07E parm PARAMETER LENGTH EXCEEDED

Explanation: The parm input parameter of the CTVUPINV utility exceeds the maximum allowable length.

The utility stops.

Corrective Action: Correct the invalid parm input parameter in the JCL and rerun the job.

CTDV08E EMPTY stat STATEMENT

Explanation: The action stat statement is specified of the CTVUPINV utility without any parameters.

The utility stops.

Corrective Action: Add required parameters to the statement in the JCL and rerun the job.

CTDV09E OBLIGATORY PARAMETER parm FOR RECORD TYPE=x IS MISSING

Explanation: The parm parameter, which is obligatory for the record type x, is missing after the record is inserted or updated by the CTVUPINV utility. The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0AE PARAMETER parm IS NOT AVAILIBLE FOR RECORD TYPE=x

Explanation: The record type x, created by the CTVUPINV utility according to the specified input parameters, is missing the parm parameter, which is obligatory for this record type. The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0BE EMPTY INDEX NAME OF INDEX LEVEL x

Explanation: The CTVUPINV utility issues this error message in the following cases:

The name of the Index level x is not specified in the created subscription record, but the name of the next Index level is specified.
The name of the Index level x is not specified in the created subscription record, but the Index value of the corresponding Index level is specified.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0CE EMPTY INDEX VALUE OF INDEX LEVEL x

Explanation: The CTVUPINV utility issues this error message in the following cases:

The value of the Index level x is not specified in the created subscription record, but the value of the next Index level is specified.
The value of the Index level x is not specified in the created subscription record, but the Index name of the corresponding Index level is specified.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0DE REPORT NAME SHOULD NOT HAVE MASK CHARACTERS FOR RECORD TYPE=G/R

Explanation: The CTVUPINV utility issues this error message when the created subscription record of type G or R has mask characters in the first 12 bytes of the report name. It is not valid because the first 12 characters of the report name are included with the record ID.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0EE LAST LEVEL INDEX VALUE SHOULD NOT HAVE MASK CHARACTERS FOR RECORD TYPE=I/S

Explanation: The CTVUPINV utility issues this error message when the created subscription record of type I or S has mask characters in the first 12 bytes of the last level index value. It is not valid because the first 12 characters of the last level index value are included with the record ID.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0GE THE SECOND DESTINATION SHOULD NOT BE SPECIFIED WHEN THE FIRST IS EMPTY

Explanation: The CTVUPINV utility issues this error message when the created subscription record has the second specification for the printing destination, while the first specification is empty.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters and the CTDSPARM default destination parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0HE DUPLICATE RECORD, OLD RECORD ID: record_id

Explanation: The CTVUPINV utility issues this error message when the created subscription record has the same record key of an existing subscription record. For more information about the record key, see the description of the utility in the INCONTROL for z/OS Utilities Guide.

The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL, and run the new job, if necessary.

CTDV0II OPERATION: operation, RECORD ID: record_id

Explanation: The information message precedes the error messages CTDV09E, CTDV0AE, CTDV0BE, CTDV0CE, CTDV0DE, CTDV0EE, CTDV0FE, CTDV0GE, and CTDV0HE. It is issued when the error described in the following message is recognized in the subscription record updated by the CHANGE TO or REPLICATE operations. It indicates the performed operation and the created subscription record. You can see the contents of the updated INV record in the output report file referred to in the DAREPORT DD statement.

Corrective Action: No action is required.

CTDV0JE CTVUPINV UTILITY TERMINATES DUE TO AN ERROR IN THE SORT

Explanation: The CTVUPINV utility issues this error message when the invoked SORT utility ended with errors.

The utility stops.

Corrective Action: Examine the messages issued by the SORT utility to SYSOUT to identify the problem. Make appropriate changes to the JCL and rerun the job.

CTDV0KI nnnnnnn NEW SUBSCRIPTION RECORDS WERE ADDED

Explanation: This information message indicates the number of subscription records added to the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0LI nnnnnnn SUBSCRIPTION RECORDS WERE READ FROM THE PERMANENT FILE

Explanation: This information message indicates the number of subscription records read from the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0MI nnnnnnn SUBSCRIPTION RECORDS WERE SELECTED

Explanation: This information message indicates the number of subscription records selected from the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0NI nnnnnnn SUBSCRIPTION RECORDS WERE DELETED

Explanation: This information message indicates the number of subscription records deleted from the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0OI nnnnnnn SUBSCRIPTION RECORDS WERE UPDATED

Explanation: This information message indicates the number of subscription records updated in the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0PW NO RECORDS WERE PROCCESSED BY THE UTILITY

Explanation: This warning message indicates that no records were found that satisfy the selection parameters specified in the input statements. In this situation the CTVUPINV utility ends with return code 4.

Corrective Action: No action is required.

CTDV0QI nnnnnnn SUBSCRIPTION RECORDS WERE REPLICATED

Explanation: This information message indicates the number of subscription records replicated in the Permanent User File during the CTVUPINV utility run.

Corrective Action: No action is required.

CTDV0RE SUBSCRIBE=X IS NOT AVAILIBLE FOR RECORD TYPE=Y

Explanation: The record type X, created by the CTVUPINV utility according to the specified input parameters, has the SUBSCRIBE type Y, which is not available this record type. The utility does not process the input statement causing this error, but continues to process other input statements.

Corrective Action: Check the input parameters causing this error, specify valid parameters in JCL and run the new job if necessary.

CTDV0SE INVALID DESTINATION FOR SUBSCRIBE=X

Explanation: This error message can be issued by either the CTVUPINV utility or when an end-user tries to subscribe to a report using Control-D/WebAccess.

The message is issued by the CTVUPINV utility in the following cases:

for a record with SUBSCRIBE=I/E the first destination was not CTDS. Where SUBSCRIBE=I/E,only CTDS is valid.
for a record with the first printing destination is CTDS, but the second destination is empty
the DEST1 and DEST2 input parameters are not specified and the NOTIFICATION and/or E-MAIL parameters in the CTDSPARM member are incorrect or omitted.

The message is issued by the Application Server if the NOTIFICATION and/or E-MAIL parameters in the CTDSPARM member are incorrect or omitted.

Corrective Action: If the error message is issued under CTVUPINV, check the input parameters and the CTDSPARM default destination parameters. Specify valid parameters and run the new job if necessary. If the error message is issued by Application Server, define correct values in the CTDSPARM member and run the new job if necessary.

CTDV0TE YOU ARE NOT AUTHORIZED TO SUBSCRIBE FOR REPORT jobName/username/reportName

Explanation: Either the CTDX024 Control-D user exit or the CTDSE24 security module on the host does not allow the current user to subscribe for report entry.

Corrective Action: Ask your INCONTROL administrator for authorization to subscribe for the report.

CTDV0UE SUBSCRIPTION TO THIS E-MAIL ADDRESS ALREADY EXISTS FOR REPORTjobName/username/reportName

Explanation: The end-user tried to subscribe a report to an e-mail address, where the subscription to the address already exists.

Corrective Action: Subscribe the report with the correct e-mail address.

CTDV0VE SUBSCRIPTION CANNOT BE PERFORMED. DEFAULT SUBSCRIPTION PARAMETERS ARE NOT SET.

Explanation: The end-user wants to receive notification or report by e-mail, but the default destination is not set in the CTDSPARM member. Subscription is not performed.

Corrective Action: Notify your INCONTROL administrator.

CTDV0WI SUBSCRIPTION PERFORMED FOR REPORT jobName/username/reportName

Explanation: This information message indicates that the subscription for the report was successful.

Corrective Action: No action is required.

Parent Topic

CTD messages