Messages CTDR00 through CTDRxx

This group includes messages for the Control-D, Control-D/Image, and Control-D/Page on Demand products.

CTDR01E INVALID PARAMETER, VALID PARAMETER: MODE=TEST OR MODE=PROD

Explanation: A MODE parameter error was detected in the CTDRSD utility.

The CTDRSD utility terminates with a condition code of 8.

Corrective Action: Correct the JCL and rerun the job. The MODE parameter in the CTDRSD utility must be set to one of the following values:

• TEST - The utility runs in simulation mode and performs an analysis. It issues error messages that indicate when there are orphan RESSET records and RESOURCEs.
• PROD - The utility runs in production mode and deletes orphan RESSET, RESOURCE records from the permanent user file, and members from the Control-D RESLIB library.

CTDR02I UTILITY CTDRSD STARTED IN mode MODE

Explanation: This information message indicates that the CTDRSD -- Delete orphan resource records utility started in TEST or PROD mode.

Corrective Action: No action is required.

CTDR03E ORPHAN RESOURCE SET jobName/counter IS DETECTED

Explanation: The CTDRSD utility detected an orphan RESSET record. The variables in this message are:

• jobName - The name of the job to which the orphan RESSET record belongs.
• counter - The counter part of the orphan RESSET record key.

If the CTDRSD utility is running in PROD mode, the orphaned RESSET record will be removed.

Corrective Action: No action is required.

CTDR04E RESOURCE SET IS MISSING FOR SYSDATA jobName/counter FILE {ACT | HST | MIG}

Explanation: This message indicates that the CTDRSD utility cannot find the RESSET record that was referred by the SYSDATA record jobName/counter. The variables in this message are:

• jobName - The name of the job to which the SYSDATA record belongs.
• counter - The counter part of the SYSDATA record key.

The CTDRSD utility continues processing.

Corrective Action: An end-user might experience problems when viewing a corresponding report. Investigate why the RESSET record was removed and try to restore the missing RESSET record to its original state.

CTDR05I SYSDATA RECORDS WITH RESOURCE SET IN THE {ACT | HST | MIG} FILE num

Explanation: This information message indicates the number of found SYSDATA records which contain references to RESSET records in the specified user file.

Corrective Action: No action is required.

CTDR06I ORPHAN RESOURCE SET jobName/counter IS DELETED

Explanation: This information message is issued by the CTDRSD utility and indicates that the utility has deleted the orphaned RESSET record. The variables in this message are:

• jobName - The name of the job to which the orphan RESSET record belongs.
• counter - The counter part of the orphan RESSET record key.

Corrective Action: No action is required.

CTDR07I UTILITY CTDRSD ENDED.

Explanation: This information message indicates that the CTDRSD -- Delete orphan resource records utility ended.

Corrective Action: No action is required.

CTDR08I NO ERRORS DETECTED.

Explanation: This information message indicates that the CTDRSD utility ended with no errors detected.

Corrective Action: No action is required.

CTDR09I ORPHAN RESOURSE SET RECORDS num

Explanation: This information message displays the number of found orphan RESSET records.

Corrective Action: No action is required.

CTDR0AE ERROR WHILE LOADING CTDAOBJ IS ENCOUNTERED

Explanation: An error occurred during an attempt to load the CTDAOBJ module. Possible causes are:

• The IOA Load library is not in the load modules search list.
• There is not enough memory to load the module.
• The CTDAOBJ module does not exist in the Load library.
• The IOA Load library is in the Linklist, and someone has updated the library without performing a refresh for the LLA.
• There is some other system-oriented reason which may be found in the syslog.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Try the following options to resolve the error:

• Look on the system log for additional messages related to the problem. Then try one of the following:
• If the IOA Load library is not in the search list, add a STEPLIB DD statement to the library.
• If the loading failed because of lack of memory, increase the region size.
• If the Load library has been modified and the IOA Load library is in the Linklist, refresh LLA.
• Rerun the CTDRSD utility.

CTDR0BE OPEN FAILED FOR OBJECT FILE RC = rc

Explanation: The CTDRSD utility failed to open the OBJECT database. In this message, rc is the return code generated by the error.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Check the IOALOG and the system log for messages which indicate the reason that the open failed. If you are unable to solve the problem, report the contents of the messages to BMC Customer Support.

CTDR0CI RESOURSE SET RECORDS IN THE PERMANENT USER FILE num

Explanation: This information message displays the number of RESSET records found in the User file.

Corrective Action: No action is required.

CTDR0DE GET RESOURCE SET LIST ERROR

Explanation: An error occurred while accessing a RESSET record list. This message accompanies additional messages, which provide detailed information.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Check the IOA Log and the system log for additional error messages. If you are unable to solve the problem, report the contents of the messages and any additional error messages to BMC Customer Support.

CTDR0EE SORT FAILED WITH RC = rc

Explanation: The site SORT utility, which was invoked by the CTDRSD, has ended with errors. In this message, rc is the return code generated by the SORT utility.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Refer to the SORT messages of the job and to the user guide for the SORT facility used at your site. If necessary, call your system programmer for assistance.

CTDR0FE OPEN OF SORT FILE FAILED. DDNAME ddname

Explanation: An OPEN failure for the ddname DD statement was detected for the CTDRSD utility. The main program of the CTDRSD utility could not open the ddname DD statement. The specified DD statement is missing from the JCL for the CTDRSD utility.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Add the missing DD statement and rerun the CTDRSD utility.

CTDR0GE GET RESOURCE LIST ERROR

Explanation: An error occurred while accessing a RESOURCE list. This message accompanies additional messages, which provide detailed information.

The CTDRSD utility ends with a condition code of 16.

Corrective Action: Check the IOA Log and the system log for additional error messages. If you are unable to solve the problem, report the contents of the messages and any additional error messages to BMC Customer Support.

CTDR0HI RESOURCES IN THE PERMANENT USER FILE num

Explanation: This information message displays the number of RESOURCE records found in the permanent user file.

Corrective Action: No action is required.

CTDR0IE RESOURCE res_name/res_typ/rep_format/res_sum IS MISSING FOR RESOURCE SET jobName/counter

Explanation: This message indicates that the CTDRSD utility cannot find the RESOURCE record or the member of the Control-D RESLIB library that has been referred by the RESSET record jobName/counter. The variables in this message are:

• res_name - The name of the requested resource.
• res_typ - The code of the type of the requested resource.
• rep_format - The code of the format of the decollated report.
• res_sum - The checksum of the requested resource.
• jobName - The name of the job to which the orphan RESSET record belongs.
• counter - The counter part of the orphan RESSET record key.

The CTDRSD utility continues processing.

Corrective Action: An end-user might have problems with viewing the corresponding report. Investigate why the RESOURCE was removed and try to restore the missing resource to its original state.

CTDR0JE ORPHAN RESOURCE res_name/res_typ/rep_format/res_sum IS DETECTED

Explanation: The CTDRSD utility detected an orphan RESOURCE. The variables in this message are:

• res_name - The name of the requested resource.
• res_typ - The code of the type of requested resource.
• rep_format - The code of the format of the decollated report.
• res_sum - The checksum of the requested resource.

If the CTDRSD utility is running in PROD mode, the orphaned RESSET record will be removed.

Corrective Action: No action is required.

CTDR0KE ORPHAN CLIQUE RESOURCE Rep_Clique_name/res_sum IS DETECTED

Explanation: The CTDRSD utility detected an orphan CLIQUE RESOURCE. The variables in this message are:

• Rep_Clique_name - The Report Clique Definition name.
• res_sum - The checksum of the requested Report Clique resource.

If the CTDRSD utility is running in PROD mode, the orphaned CLIQUE RESOURCE will be removed.

Corrective Action: No action is required.

CTDR0LI ORPHAN RESOURCE res_name/res_typ/rep_format/res_sum IS DELETED

Explanation: This information message is issued by the CTDRSD utility and indicates that the utility has deleted the orphaned RESOURCE. The variables in this message are:

• res_name - The name of the requested resource.
• res_typ - The code of the type of the requested resource.
• rep_format - The code of the format of the decollated report.
• res_sum - The checksum of the requested resource.

Corrective Action: No action is required.

CTDR0MI ORPHAN CLIQUE RESOURCE Rep_Clique_name/res_sum IS DELETED

Explanation: This information message is issued by the CTDRSD utility and indicates that the utility has deleted the orphaned CLIQUE RESOURCE. The variables in this message are:

• Rep_Clique_name - The Report Clique Definition name.
• res_sum - The checksum of the requested Report Clique resource.

Corrective Action: No action is required.

CTDR0NI ORPHAN RESOURCES num

Explanation: This information message displays the number of found orphan RESOURCE records from the permanent user file and/or members of the Control-D RESLIB library.

Corrective Action: No action is required.

CTDR0OE CLIQUE RESOURCE Rep_Clique_name/res_sum IS MISSING FOR RESOURCE SET jobName/counter

Explanation: This message indicates that the CTDRSD utility cannot find the CLIQUE RESOURCE referred by the RESSET record jobName/counter. The variables in this message are:

• Rep_Clique_name - The Report Clique Definition name.
• res_sum - The checksum of the requested Report Clique resource.
• jobName - The name of the job to which the RESSET record belongs.
• counter - The counter part of the RESSET record key

The CTDRSD utility continues processing.

Corrective Action: An end-user might experience problems when attempting to view the corresponding report. Investigate why the CLIQUE RESOURCE was removed and try to restore the missing CLIQUE RESOURCE to its original state.

CTDR0PE ORPHAN RESOURCE res_name/res_typ/rep_format/res_sum IS NOT DELETED

Explanation: Either the orphaned RESOURCE record from the permanent user file or a member of the Control-D RESLIB library was not deleted by the CTDRSD utility. This message follows other messages that explain the nature of the error. The variables in this message are:

• res_name - The name of the requested resource.
• res_typ - The code of the type of the requested resource.
• rep_format - The code of the format of the decollated report.
• res_sum - The checksum of the requested resource.

The CTDRSD utility continues processing.

Corrective Action: Review the messages that precede this message for reasons for the deletion failure.

CTDR0QE ORPHAN CLIQUE RESOURCE Rep_Clique_name/res_sum IS NOT DELETED

Explanation: The orphaned CLIQUE RESOURCE was not deleted by the CTDRSD utility. This message follows other messages that explain the nature of the error. The variables in this message are:

• Rep_Clique_name - The Report Clique Definition name.
• res_sum - The checksum of the requested Report Clique resource.

The CTDRSD utility continues processing.

Corrective Action: Review the messages that precede this message for reasons for the deletion failure.

CTDR0RE RESOURCE SET jobName/counter IS NOT DELETED

Explanation: The orphaned RESSET record was not deleted by the CTDRSD utility. This message follows other messages that explain the nature of the error. The variables in this message are:

• jobName - The name of the job to which the orphan RESSET record belongs.
• counter - The counter part of the orphan RESSET record key.

The CTDRSD utility continues processing.

Corrective Action: Review the messages that precede this message for reasons for the deletion failure.

CTDR0SI DELETED RESOURCE SET RECORDS num

Explanation: This information message displays the number of deleted RESSET records.

Corrective Action: No action is required.

CTDR0TI DELETED RESOURCES num

Explanation: This information message displays the number of deleted RESOURCE records from the permanent user file and/or members of the Control-D RESLIB library.

Corrective Action: No action is required.

CTDRS0I CTDUFPRT STARTED

Explanation: This information message indicates that CTDRSTMS, the massive restore request utility, has started.

Corrective Action: No action is required.

CTDRS1E INVALID PARAMETER: parm

Explanation: The parm input parameter specified for the CTDRSTMS utility is not valid.

The utility stops.

Corrective Action: Correct the invalid input parameter and rerun the job.

CTDRS2E REDUNDANT PARAMETER: parm

Explanation: The parm input parameter for the CTDRSTMS utility has already been specified.

The utility stops.

Corrective Action: Delete the extra input parameter from the JCL and rerun the job.

CTDRS3E THE PARAMETER parm MUST BE SPECIFIED

Explanation: The required parm input parameter for the CTDRSTMS utility is missing.

The utility stops.

Corrective Action: Insert the missing parameter into the JCL and rerun the job.

CTDRS6I NUMBER OF SELECTED RECORDS: number

Explanation: This information message issue displays the total number of records selected by the CTDRSTMS utility.

Corrective Action: No action is required.

CTDRSEI CTDUFRST ENDED WITH ERRORS

Explanation: This information message indicates that the CTDRSTMS utility finished with errors.

Corrective Action: Examine other messages relating to the CTDRSTMS utility to identify and fix the problem, and then rerun the utility.

CTDRSFI CTDRSTMS ENDED OK

Explanation: This information message indicates that the CTDRSTMS utility finished successfully.

Corrective Action: No action is required.

CTDRSGI KEY='reportKey', ODATE=date

Explanation: This information message identifies a report that was selected by the CTDRSTMS utility.

The variables in the message are:

• reportKey - VSA key of the selected report.
• date - decollation mission order date of the report. The date format is one of he following, depending on the site standard defined in the IOAPARM installation member.
• dd/mm/yy
• mm/dd/yy
• yy/mm/dd

Corrective Action: No action is required.

CTDRSHI LIST OF SELECTED REPORTS:

Explanation: This information message is the title for the list of selected reports (CTDRSGI messages) that are issued by the CTDRSTMS utility.

Corrective Action: No action is required.