Messages CTBA00 through CTBAxx

This group includes messages for the Control-M/Analyzer product.

CTBA00I CONTROL-M/ANALYZER UTILITY CTBJAFDL STARTED

Explanation: This information message indicates the normal start of the CTBJAFDL utility.

Corrective Action: No action is required.

CTBA01E PLEASE CHECK THE SYNTAX OF STATEMENT stmt

Explanation: The CTBJAFDL or CTBJAFCP utility failed because of a syntax error in the stmt statement.

The utility stops executing with a condition code of 08.

Corrective Action: Correct the indicated statement and rerun the job.

CTBA02S ERROR OPENING SYSPRINT

Explanation: The CTBJAFDL or CTBJAFCP utility failed to open the print file referenced by the SYSPRINT DD statement.

The failure may be due to one of the following:

The SYSPRINT DD statement is missing.
The data set referenced by the SYSPRINT DD statement cannot be accessed for a sequential write.

The utility stops executing with a condition code of 16.

Corrective Action: Correct the JCL and rerun the job.

CTBA03S ERROR OPENING SYSIN

Explanation: The CTBJAFDL or CTBJAFCP utility failed to open the input file referenced by the SYSIN DD statement.

The failure may be due to one of the following:

The SYSIN DD statement, or the DACMD DD statement, is missing.
The data set referenced by the SYSIN DD statement cannot be accessed for a sequential read.

The utility stops executing with a condition code of 16.

Corrective Action: Correct the JCL and rerun the job.

CTBA04S ERROR DURING JAF FILE PROCESSING. OPERATION: opn

Explanation: The CTBJAFDL or CTBJAFCP utility failed to perform the opn operation on the Rule Activity file. The accompanying return code is indicated in the CTBA07I message.

If processing of the current record fails, processing continues with the next record. In some cases, for example, if the file could not be opened, processing stops.

Corrective Action: Notify your INCONTROL administrator.

CTBA05S ERROR DURING REPORT FILE PROCESSING. OPERATION: opn

Explanation: The CTBJAFDL or CTBJAFCP utility failed to perform the opn operation on the Control-M/Analyzer report file. The accompanying return code is indicated in the CTBA07I message.

If processing of the current record fails, processing continues with the next record. In some cases, for example if the file could not be opened, processing is stopped.

Corrective Action: Notify your INCONTROL administrator.

CTBA06S DDNAME: ddName, REQUESTED FUNCTION CANNOT BE PERFORMED SINCE FILE IS BEING ACCESSED BY ANOTHER USER

Explanation: The CTBJAFDL or CTBJAFCP Control-M/Analyzer utility could not lock a database file referenced by the DD name in the DD statement when trying to update it.

The CTBJAFDL or CTBJAFCP Control-M/Analyzer utility stops execution with a nonzero return code.

Corrective Action: Check the reason for a conflict and rerun the Control-M/Analyzer utility after the concurrent applications have finished running.

CTBA07I RC= rc

Explanation: This information message indicates the return code resulting from execution of the CTBJAFDL or CTBJAFCP utility.

Corrective Action: No action is required.

CTBA08E FIRST INPUT STATEMENT FOR CONTROL-M/ANALYZER UTILITY CTBJAFDL MUST BE A "DAYS" STATEMENT

Explanation: The first input statement for the CTBJAFDL utility must be, but was not, statement DAYS.

The utility stops executing with a condition code of 08.

Corrective Action: Correct the input statement and rerun the job.

CTBA09S ERROR DURING FREEMAIN OPERATION

Explanation: The CTBJAFDL or CTBJAFCP utility failed to perform a FREEMAIN operation. The accompanying return code is indicated in the CTBA07I message.

The utility stops executing.

Corrective Action: Notify your INCONTROL administrator.

CTBA0AI THE FOLLOWING JOB RECORDS HAVE BEEN DELETED:

Explanation: This information message indicates the successful deletion of jobs by the CTBJAFDL utility. This message precedes the CTBA11I, CTBA12I, and CTBA13I messages, which display the list of deleted jobs.

Corrective Action: No action is required.

CTBA0BI num JOB RECORDS HAVE BEEN COPIED

Explanation: This information message indicates the number of job entries that have been copied to the target Rule Activity file by the CTBJAFCP Control-M/Analyzer utility.

Corrective Action: No action is required.

CTBA0CI num PRIMARY REPORT RECORDS HAVE BEEN COPIED

Explanation: This information message indicates the number of primary report entries that have been copied to the target report file by the CTBJAFCP Control-M/Analyzer utility.

Corrective Action: No action is required.

CTBA0DE JOB ACTIVITY FILE IS FULL. PLEASE RUN CONTROL-M/ANALYZER UTILITY CTBJAFDL

Explanation: The CTBJAFCP utility failed to copy of the Rule Activity file because the target file is full. The accompanying return code is indicated in the CTBA07I message.

The utility stops executing.

Corrective Action: Compress the Report file by running the CTBJAFDL Control-M/Analyzer utility.

CTBA0EE REPORT FILE IS FULL. PLEASE RUN CONTROL-M/ANALYZER UTILITY CTBJAFDL

Explanation: The CTBJAFCP utility failed to copy of the Rule Activity file because the target file is full. The accompanying return code is indicated in the CTBA07I message.

The utility stops executing.

Corrective Action: Compress the Report file by running the CTBJAFDL utility.

CTBA0FI num JOB RECORDS HAVE BEEN DELETED

Explanation: This information message indicates the number of job entries that were deleted from the Rule Activity File by the CTBJAFDL Control-M/Analyzer utility.

Corrective Action: No action is required.

CTBA12I | JOBNAME | JOBID | DATE | TIME |

Explanation: This information message consists of a series of titles for the information provided in the CTBA13I message.

Corrective Action: No action is required.

CTBA13I |jobName|jobId|date|time|

Explanation: The CTBA12I and CTBA13I information messages form a chart listing job entries that were deleted from the Rule Activity file by the C TBJAFDL Control-M/Analyzer utility.

The CTBA13I message is repeated once for each job entry that was deleted.

Corrective Action: No action is required.

CTBA16I CONTROL-M/ANALYZER UTILITY CTBJAFCP STARTED

Explanation: This information indicates the normal start of the CTBJAFCP Control-M/Analyzer utility.

Corrective Action: No action is required.

CTBA17S INSUFFICIENT STORAGE TO RUN CONTROL-M/ANALYZER UTILITY CTBJAFDL

Explanation: The CTBJAFDL utility requires more memory to compress the Rule Activity file and the report file.

The utility stops executing with a condition code of 12.

Corrective Action: Increase the REGION size and rerun the job.

CTBA18S INSUFFICIENT STORAGE TO RUN CONTROL-M/ANALYZER UTILITY CTBJAFCP

Explanation: The CTBJAFCP utility requires more memory to copy the Rule Activity file and the report file.

The utility stops executing with a condition code of 12.

Corrective Action: Increase the REGION size and rerun the job.

CTBA22S UNABLE TO OPEN FILE. FORMAT FAILED

Explanation: The CTBDBF4 Control-M/Analyzer utility failed to open the target file referenced by the DAOUT DD statement.

The failure may be due to one of the following:

The DAOUT DD statement is missing.
The data set referenced by the DAOUT DD statement does not exist.

The utility terminates with a condition code of 116.

Corrective Action: Correct the JCL and rerun the job.

CTBA23S ERROR OPENING SYSPRINT. UNABLE TO CONTINUE PROCESSING

Explanation: The CTBDBF4 Control-M/Analyzer utility failed to open the print file referenced by the SYSPRINT DD statement.

The failure may be due to one of the following:

The SYSPRINT DD statement is missing.
The data set referenced by the SYSPRINT DD statement cannot be accessed for a sequential write.

The utility terminates with a condition code of 120.

Corrective Action: Correct the JCL and rerun the job.

CTBA24S INSUFFICIENT STORAGE TO RUN FORMAT

Explanation: The CTBDBF4 Control-M/Analyzer utility requires more memory to format the target file.

The utility terminates with a condition code of 112.

Corrective Action: Increase the REGION size and rerun the job.

CTBA30I A PROBLEM WAS FOUND IN LINE lin

Explanation: This information message indicates that the lin input line was erroneous. An error message detailing the problem follows this message.

Corrective Action: No action is required.

CTBA31E INVALID LINE. item=VALUE EXPECTED

Explanation: The line structure was not in the format item= value. Input lines with parameters for the CTBVXRF cross-reference utility must be formatted item= value.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the utility parameters and rerun the utility.

For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA32E AN INPUT LINE OF THE FORM LIB= rule-lib IS EXPECTED

Explanation: The input statement to the CTBVXRF cross-reference utility did not include the parameter identified in the message.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the CTBVXRF utility.

For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA33E AN INPUT LINE OF THE FORM RULE=NAME-MASK IS EXPECTED

Explanation: The input statement to the CTBVXRF cross-reference utility did not include the parameter identified in the message.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the CTBVXRF utility.

For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA34E AN INPUT LINE OF THE FORM SORT=RULE/VAR IS EXPECTED

Explanation: The input statement to the CTBVXRF cross-reference utility did not include the parameter identified in the message.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the CTBVXRF utility.

For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA35E AN INPUT LINE OF THE FORM BLOCKS=YES/NO IS EXPECTED

Explanation: The current input line specified an unexpected parameter. The input to cross-reference The CTBVXRF utility consists of parameters specified in a predefined order.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the CTBVXRF utility. See the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide for more information.

CTBA36E INCORRECT SORT OPTION. SPECIFY "RULE" OR "VAR"

Explanation: The sort option was incorrect. The Cross-Reference Report may be sorted either by rule name (option RULE) or by variable name (option VAR).

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the utility.

For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA37E INCORRECT BLOCKS OPTION, SPECIFY "YES" OR "NO"

Explanation: The value of the BLOCKS option for the CTBVXRF cross-reference utility was not YES or NO.

The BLOCKS option specifies whether or not to include the block name in the cross-reference report. Its value must be YES or NO.

The CTBVXRF cross-reference utility terminates with an error.

Corrective Action: Correct the error and rerun the utility. For more information, see the CTBVXRF cross-reference utility in the INCONTROL for z/OS Utilities Guide.

CTBA3AI CONTROL-M/ANALYZER UTILITY CTBDBVCG STARTED

Explanation: This information message indicates that the CTBDBVCG Control-M/Analyzer utility, which changes the number of generations, has started running.

Corrective Action: No action is required.

CTBA3BE INVALID GROUP CRITERIA SPECIFIED

Explanation: The CTBDBVCG Control-M/Analyzer utility detected an error in the GROUP input statement.

The CTBDBVCG Control-M/Analyzer utility stops executing with a condition code of 32.

Corrective Action: Correct the GROUP input statement and rerun the job. For more information, see the description of the GROUP input statement in the Control-M/Analyzer User Guide.

CTBA3CE INVALID VARIABLE CRITERIA SPECIFIED

Explanation: The CTBDBVCG Control-M/Analyzer utility detected an error in the VARIABLE input statement.

The CTBDBVCG Control-M/Analyzer utility stops executing with a condition code of 32.

Corrective Action: Correct the VARIABLE input statement and rerun the job. For more information, see the description of the VARIABLE input statement in the Control-M/Analyzer User Guide.

CTBA3DS INTERNAL ERROR READING DATABASE RECORD. ERROR CODE rc

Explanation: Processing of the Control-M/Analyzer Model failed.

The utility stops executing with a nonzero condition code.

Corrective Action: Provide your INCONTROL administrator with the sysout of the CTBDBVCG utility.

CTBA3ES INTERNAL ERROR UPDATING DATABASE RECORD, ERROR CODE rc

Explanation: Processing of the Control-M/Analyzer Variables Definition or Variables Generations failed.

The utility stops executing with a nonzero condition code.

Corrective Action: Provide your INCONTROL administrator with the sysout of the CTBDBVCG. utility.

CTBA3FS INSUFFICIENT SPACE IN THE CONTROL-M/ANALYZER VAR FILE

Explanation: The CTBDBVCG utility could not update the Control-M/Analyzer Variables Generations file because it was full.

The CTBDBVCG utility stops executing with a nonzero condition code.

Corrective Action: Enlarge the Control-M/Analyzer Variables Generations file or decrease the value of the NUMGEN input parameter and rerun the job.

CTBA40S INSUFFICIENT SPACE IN THE CONTROL-M/ANALYZER MOD FILE

Explanation: The CTBDBVCG utility could not update the Control-M/Analyzer Variables Definition file because it was full.

The CTBDBVCG utility stops executing with a nonzero condition code.

Corrective Action: Enlarge the Control-M/Analyzer Variables Definition file or decrease the value of the NUMGEN input parameter and rerun the job.

CTBA41E INVALID NUMGEN PARAMETER SPECIFIED

Explanation: The CTBDBVCG Control-M/Analyzer utility detected an error in the NUMGEN input statement.

The CTBDBVCG Control-M/Analyzer utility stops executing with a condition code of 32.

Corrective Action: Correct the NUMGEN input statement and rerun the job. For more information, see the description of the NUMGEN input statement in the Control-M/Analyzer User Guide.

CTBA42S OPEN OF SYSIN FAILED. CHECK DD CARD "DACMD"

Explanation: The CTBDBVCG Control-M/Analyzer utility failed to open the input file referenced by the DACMD DD statement.

Possible causes are:

The DACMD DD statement is missing.
The data set referenced by the DACMD DD statement cannot be written to sequentially.

The utility stops executing with a condition code of 16.

Corrective Action: Correct the JCL accordingly and rerun the job.

CTBA43S ERROR OPENING CONTROL-M/ANALYZER DATABASE

Explanation: The CTBDBVCG Control-M/Analyzer utility failed to open the Control-M/Analyzer database.

The utility stops executing with a nonzero condition code.

Corrective Action: Verify that the correct Control-M/Analyzer database was allocated to the CTBDBVCG utility and rerun the job.

CTBA44S INSUFFICIENT STORAGE TO RUN CONTROL-M/ANALYZER UTILITY CTBDBVCG

Explanation: There is insufficient memory for the CTBDBVCG Control-M/Analyzer utility to update the database.

The CTBDBVCG utility stops executing with a condition code of 12.

Corrective Action: Increase the region size for the CTBDBVCG utility, and rerun the job.

CTBA45S OPEN OF SYSPRINT FAILED. CHECK DD CARD "DCBOUT"

Explanation: The CTBDBVCG Control-M/Analyzer utility failed to open the print file referenced by the DCBOUT DD statement.

The failure might be due to one of the following reasons:

The DCBOUT DD statement is missing.
The data set referenced by the DCBOUT DD statement cannot be written to sequentially.

The CTBDBVCG utility stops executing with a condition code of 8.

Corrective Action: Correct the JCL accordingly and rerun the job.

CTBA46I NO INPUT PARAMETERS SPECIFIED. SYSIN FILE IS EMPTY

Explanation: This information message indicates that no input statements were specified for the CTBDBVCG Control-M/Analyzer utility.

The CTBDBVCG utility stops executing with a condition code of 4.

Corrective Action: Insert GROUP and/or VARIABLE input statements in the JCL and rerun the job.

CTBA47I NO CONTROL-M/ANALYZER VARIABLES SATISFIED THE SPECIFIED CRITERIA

Explanation: This information message indicates that the CTBDBVCG Control-M/Analyzer utility found no database records that satisfy the specified input criteria.

The CTBDBVCG utility stops executing with a condition code of 4.

Corrective Action: Correct the GROUP and/or VARIABLE input statements in the JCL and rerun the job.

Parent Topic

CTB messages