Messages COPB00 through COPBxx

This group includes messages for the Control-M for z/OS, Control-M/Assist, Control-M/Links for z/OS, and Control-M/Restart products.

COPB40S OPEN OF NEW ACTIVE MISSION FILE FAILED

Explanation: The CTDCAMF Control-D utility, which is used to copy the Active Missions file to a new file, failed to open the file.

Possible causes are:

• The DAAMFN DD statement is missing.
• There is insufficient memory for the job.

The utility stops executing with a condition code of 08.

Corrective Action: Correct the JCL and rerun the job.

COPB41I NEW ACTIVE MISSION FILE SUCCESSFULLY COPIED

Explanation: This information message indicates that the CTDCAMF utility has successfully copied the Active Missions file.

Corrective Action: No action is required.

COPB42S OPEN OF PARAMETERS FILE FAILED. DDNAME "DACOPPRM"

Explanation: Open of the utility parameters file failed (the DACOPPRM DD statement). This message is issued by the CTDCAMF utility.

Possible causes are:

• The DACOPPRM DD statement is missing.
• The data set described by the DACOPPRM DD statement cannot be opened for sequential read.

The simulation stops executing with a condition code of 08.

Corrective Action: Correct the JCL and rerun the job.

COPB43S REQUIRED OPERATION CANNOT BE PERFORMED BECAUSE THE CONTROL-D MONITOR IS ACTIVE

Explanation: An attempt was made to run the CTDCAMF utility while the Control-D monitor was active. Maintenance of the Control-D Active Missions file can be performed only when the Control-D monitor is not active.

The utility terminates with a condition code of 08.

Corrective Action: Shut down the Control-D monitor. If you are using the COPY function, refer to the description of the CTDCAMF utility in the Control-D and Control-V User Guide.

COPB44S YOU CANNOT COPY THE ACTIVE MISSION FILE TO ITSELF

Explanation: The CTDCAMF utility is attempting to copy the Active Missions file to itself.

The utility terminates with a condition code of 08.

Corrective Action: Correct the JCL and rerun the job.

COPB45I CONTROL-D ACTIVE MISSIONS FILE IS COPIED TO BACKUP FILE

Explanation: This information message is the normal start message of the CTDCAMF utility for the COPY option.

Corrective Action: No action is required.

COPB46I COMPRESSING OF CONTROL-D ACTIVE MISSIONS FILE STARTED

Explanation: This information message is the normal start message of the CTDCAMF utility for the COMPRESS option.

Corrective Action: No action is required.

COPB47I COMPRESSING OF CONTROL-D ACTIVE MISSIONS FILE ENDED

Explanation: This information message is the normal termination message of utility CTDCAMF for the COMPRESS option.

Corrective Action: No action is required.

COPB48S ERROR WHILE COMPRESSING ACTIVE MISSIONS FILE, FILE WAS NOT COMPRESSED

Explanation: The CTDCAMF Control-D utility failed.

Possible causes are:

• The DAAMF DD statement is missing.
• The data set described by the DD statement is not the Control-D Active Missions file.
• The data set described by the DAAMF DD statement is the Control-D Active Missions file, but for another Control-D monitor or from a different Control-D version.
• The DABKUP DD statement is missing.
• The SYSPRINT DD statement is missing. See the CTM913S message.

Utility terminates with a condition code of 08.

Corrective Action: Correct the JCL and rerun the job.