Messages ACIF00 through ACIFxx

This group includes messages for the Control-O product.

ACIF40I ACIF PRINTING INTERFACE STARTED

Explanation: This information message indicates that the Control-D ACIF Interface Facility has started for a report being processed by the Printing Mission that issued the message.

A report destined for PC file transfer that was decollated with the ACIF CDAM parameter set to YES will be converted by ACIF into AFP Category 5 data stream format.

The Printing Mission begins initialization of the ACIF Interface Facility.

Corrective Action: No action is required.

ACIF41I ACIF PRINTING INTERFACE COMPLETED SUCCESSFULLY

Explanation: This information message indicates that the Control-D ACIF Interface Facility has successfully converted a report being processed by the Printing Mission that issued the message.

A report destined for PC file transfer that was decollated with the CDAM ACIF parameter set to YES was converted by ACIF into AFP Category 5 data stream format.

The Printing Mission terminates processing of the ACIF Interface Facility and completes processing of the report.

Corrective Action: No action is required.

ACIF42E ACIF PRINTING INTERFACE ENDED IN ERROR

Explanation: The Control-D ACIF Interface Facility encountered an error condition while attempting to convert a report being processed by the Printing Mission that issued the message.

This message is followed by the ACIF43E and ACIF44E messages that describe the cause of the error.

The Printing Mission terminates processing of the ACIF Interface Facility and ends in error.

Corrective Action: Examine the ACIF43E and ACIF44E messages to determine why the Control-D ACIF Interface Facility ended in error and correct the problem accordingly.

ACIF43E CODE= err_cod, R15= reg_15, R0= reg_0, R1= reg_1

Explanation: The Control-D ACIF Interface Facility encountered an error condition while attempting to convert a report being processed by the Printing Mission that issued the message. This message displays the Control-D internal error code and the contents of registers 15, 0, and 1 at the time of error.

The variables in this message are:

• err_cod - the Control-D internal error code
• reg_15 - the contents of register 15
• reg_0 - the contents of register 0
• reg_1 - the contents of register 1

The Control-D ACIF Interface Facility issues this message in combination with the ACIF44E message to describe the error and to assist in diagnosing its cause.

The Control-D ACIF Interface Facility terminates processing of the report. The Printing Mission ends in error.

Corrective Action: Examine the ACIF44E message for a description of the problem encountered.

ACIF44E descr

Explanation: The Control-D ACIF Interface Facility encountered an error condition while attempting to convert a report being processed by the Printing Mission that issued the message. This message displays a text description of the error encountered.

The Control-D ACIF Interface Facility issues this message in combination with the ACIF43E or ACIF4BE message to describe the error and to assist in diagnosing its cause.

The Control-D ACIF Interface Facility terminates processing of the report. The Printing Mission ends in error.

Corrective Action: Use the information displayed in this message and in the ACIF43E or ACIF4BE message to determine the cause of the error and correct the problem. If the problem persists, contact your INCONTROL administrator.

ACIF45I MAXIMUM CONCURRENT ACIF/CCIF PRINTING MISSIONS ALREADY EXECUTING

Explanation: This information message indicates that the Control-D ACIF Interface Facility is temporarily unavailable because, within a Print monitor address space, the maximum number of Printing Missions that can concurrently use the facility has been reached.

The Control-D ACIF Interface Facility limits the total number of ACIF subtasks that can execute at the same time. This limit is defined using customization setting WD2375. The wait interval is defined using customization setting WD2377.

When the time specified in the wait interval has elapsed, the Printing Mission again tries to access the Control-D ACIF Interface Facility.

Corrective Action: No action is required.

ACIF46I WAITING FOR AN EXECUTING ACIF/CCIF PRINTING MISSION TO COMPLETE

Explanation: This information message indicates that the Printing Mission detected that the maximum number of ACIF subtasks permitted to execute simultaneously has been reached.

The Control-D ACIF Interface Facility limits the total number of ACIF subtasks that can execute at the same time. This limit is defined by means of customization setting WD2375. The wait interval is defined by means of customization setting WD2377.

When the time specified in the wait interval has elapsed, the Printing Mission again tries to access the Control-D ACIF Interface Facility.

Corrective Action: No action is required.

ACIF47E MAXIMUM RETRIES LIMIT TO START AN ACIF/CCIF PRINTING MISSION REACHED

Explanation: The Printing Mission failed to access the Control-D ACIF Interface Facility after making the maximum number of attempts allowed.

The Control-D ACIF Interface Facility was being used by the maximum number of ACIF subtasks allowed to execute concurrently. The Printing Mission tried to access the Control-D ACIF Interface Facility without success more than the maximum retry value specified using customization setting WD2378.

Corrective Action: Increase the maximum retry value specified using customization setting WD2378 and/or increase the wait interval value specified using customization setting WD2377. Reorder the Printing Mission. If the problem persists, contact your INCONTROL administrator.

ACIF48W ACIFPARM MEMBER memName NOT FOUND - SEARCHING FOR MEMBER $$$$DFLT

Explanation: No matching member was found in the Control-D ACIFPARM library for the report being processed by the Control-D ACIF Interface Facility.

Control-D failed to find an ACIFPARM library member memName with a name matching either the job, Printing Mission or Recipient name of the job. The member name search convention used is determined by the setting of optional wish WD2376. The default is J for job name.

Control-D will attempt to obtain default ACIF execution parameters from the ACIFPARM member $$$$DFLT.

Corrective Action: Check the setting for optional wish WD2376. Add a member to the ACIFPARM library with the appropriate name or verify that the default ACIF execution parameters in ACIFPARM member $$$$DFLT are appropriate for the report.

ACIF49W ACIF ISSUED WARNING MESSAGES - PROCESSING CONTINUES

Explanation: The Control-D ACIF Interface Facility has detected that ACIF completed processing with a noncritical return code of 4.

The Control-D ACIF Interface Facility has successfully completed converting the report to AFP Category 5 data stream format. However, a warning condition was detected by ACIF that may affect the contents of the data stream.

Corrective Action: Inspect the ACIF message output to determine the cause of the warning and whether or not its effect on the report data stream can be ignored.

ACIF4BE CTVINDEX STATEMENT SYNTAX ERROR

Explanation: The Control-D ACIF Interface Facility encountered syntax that is invalid for the CTVINDEX parameter in ACIFPARM library member.

The Control-D ACIF Interface Facility issues this message together with the ACIF44E message, which describes the error.

The Printing Mission terminates processing of the ACIF Interface Facility and ends in error.

Corrective Action: Examine the ACIF44E message for a description of the problem.