The LOAD-INDEX RELEASE command (or LIND RELEASE command) releases an override on a Load-Index, restoring its load level to the most recently measured or most recently set value.
Use the following API command:
LOAD-INDEX RELEASE,parameters |
The following parameters can be used in this command:
Table 273e Parameters of the LOAD-INDEX RELEASE command
Parameter |
Description |
---|---|
NAME |
Name of Load-Index to release. Masking is supported. |
TYPE |
(Optional) Perform the action only if the Load-Index is of a specific type. Valid values: UTIL, 4HRA, EXT, MVA |
ISOVERRIDDEN (or ISOVER) |
(Optional) Perform the action depending on whether or not the load level of the Load-Index is currently overridden. Valid values: Y (Yes) | N (No) |
LEVEL (or LVL) |
(Optional) Perform the action only if the current load level is as specified. Valid values: CRITICAL, V-HIGH, HIGH, MEDIUM, LOW, IDLE |
FROMLEVEL (or FROMLVL) |
(Optional) Perform the action only if the current load level is as specified or higher. Valid values: CRITICAL, V-HIGH, HIGH, MEDIUM, LOW, IDLE |
NOTE |
(Optional) Add a note to the action. |
Example:
Command:
LOAD-INDEX RELEASE NAME=*
Response:
WLI033I LOAD-INDEX LINDEX3 WAS RELEASED TO LOW
WLI03BI ACTION PERFORMED SUCCESSFULLY, 1 LOAD-INDEXES MODIFIED
Parent Topic |