|
|
|
|
|
This group includes messages for the Control-M for z/OS, Control-M/Assist, Control-M/Links for z/OS, and Control-M/Restart products.
Explanation: CTMWLM, the Control-M workload management service class processing module, received an incomplete or incorrect parameter list.
The specific service class request is aborted.
Corrective Action: Prepare the Control-M monitor full output and contact BMC Customer Support.
Explanation: CTMWLM, the Control-M workload management service class processing module, was unable to read the WLMSCTBL table in the CTM PARM library.
The specific service class request is aborted.
Corrective Action: Note the values of rc and rsn, prepare the Control-M monitor full output, and contact BMC Customer Support.
Explanation: CTMWLM, the Control-M workload management service class processing module, was unable to acquire enough storage to build the internal table which represents the WLMSCTBL table in the CTM PARM library.
The specific service class request is aborted.
Corrective Action: Note the values of len and r15, prepare the Control-M monitor full output, and contact BMC Customer Support.
Explanation: CTMWLM, the Control-M workload management service class processing module, was unable to free previously-acquired storage.
Corrective Action: Note the values of len and ptr, prepare the Control-M monitor full output, and contact BMC Customer Support.
Explanation: CTMWLM, the Control-M workload management service class processing module, successfully loaded or reloaded the WLMSCTBL table from the CTM PARM library.
Corrective Action: No action is required.
Explanation: CTMWLM, the Control-M workload management service class processing module, successfully loaded or reloaded the WLMSCTBL table from the CTM PARM library but found no valid entries.
All subsequent service class requests are effectively ignored.
Corrective Action: Correct or add entries to the WLMSCTBL table in the CTM PARM library.
Explanation: CTMWLM, the Control-M workload management service class processing module, detected a parsing error in this entry in the WLMSCTBL table in the CTM PARM library.
The variables in this message are:
The table entry is ignored.
Corrective Action: Correct the entry in the WLMSCTBL table in the CTM PARM library.
Explanation: CTMWLM, the Control-M workload management service class processing module, attempted to reset the service class of the job to servClass.
Corrective Action: No action is required.
Explanation: CTMWLM, the Control-M workload management service class processing module, attempted to reset the service class of the job to servClass but failed.
The specific service class request is unsuccessful.
Corrective Action: For information about the return and reason codes, see the explanation of IWMRESET in the IBM manual MVS Programming: Workload Management Services.
Explanation: The Workload Policy contains two or more rules that are almost identical — associated with the same Load-Index, but differing in the defined limit (of jobs or resources) and threshold load level. The defined threshold level in the first rule is lower than in the latter rule(s), and logically covers the scope of levels defined by any higher threshold level in a latter rule. The rule with the higher threshold is ignored.
Corrective Action: Review the rules in the Workload Policy and adjust their definitions or change their order in the Workload Policy.
Explanation: Control-M Workload Optimization was unable to call the RMF Monitor III Sysplex Data Service ERB3XDRS because not enough storage was available.
Corrective Action: Increase the region size available to the Control-M monitor. If the problem persists, contact BMC Customer Support.
Explanation: Control-M Workload Optimization tried to call the RMF Monitor III Sysplex Data Service ERB3XDRS, but was unsuccessful. As a result, RMF data for the specified system is not available to Control-M.
Corrective Action: For more information about ERB3XDRS return codes and reason codes, review the material about return codes and reason codes for RMF sysplex data services in IBM’s z/OS RMF Programmer's Guide.
Explanation: Control-M Workload Optimization tried to call the RMF Monitor III Sysplex Data Service ERB3XDRS, but it returned incomplete data. As a result, RMF data for the specified system is not available to Control-M.
Note that systems running as a z/VM guest cannot produce the required RMF data and thus cannot be monitored by the Control-M Workload Optimization feature.
Corrective Action: Check the RMF Monitor III in the relevant system for errors.
Explanation: Control-M Workload Optimization was unable to either initialize/terminate or write to the Workload Load-Indexes repository.
Corrective Action: Contact BMC Customer Support.
Explanation: Control-M Workload Optimization was unable to either initialize/terminate, lock/unlock, read or clear from the Workload Load-Indexes repository.
Corrective Action: Contact BMC Customer Support.
Explanation: Control-M Workload Optimization tried to obtain storage but was unsuccessful. As a result, Load-Index level calculations are inactive.
Corrective Action: Increase the region size available to the Control-M monitor. If the problem persists, contact BMC Customer Support.
Explanation: Control-M Workload Optimization program has failed. As a result, Load-Index calculations are inactive.
Corrective Action: Contact BMC Customer Support.
Explanation: Control-M Workload Optimization tried to call the RMF Monitor III Sysplex Data Service ERB3XDRS but it returned incomplete data. As a result, RMF data for the specified system is not available to Control-M.
Corrective Action: Increase the region size available to the Control-M monitor. If the problem persists, contact BMC Customer Support.
Explanation: Control-M Workload Optimization failed to load Load-Index definitions. As a result, Load-Index calculations are inactive.
Corrective Action: Fix the problem and restart Control-M.
Explanation: The specified number of Load-Indexes were successfully loaded to memory.
Corrective Action: No action is required.
Explanation: Control-M Workload Optimization failed during Load-Index level calculation. As a result, Load-Index calculations are inactive.
Corrective Action: Contact BMC Customer Support.
Explanation: The Control-M Workload Load-Indexes repository file is missing or invalid, Control-M will continue without the Workload Optimization feature.
Corrective Action: Allocate and initiate the Workload Load-Indexes repository file. For more information, see the section about the CTMWLI utility in the INCONTROL for z/OS Utilities Guide.
Explanation: The Control-M Workload Optimization Load-Indexes repository was updated with the latest Load-Index definitions.
Corrective Action: No action is required.
Explanation: Control-M Workload Optimization tried to call the RMF Monitor III Sysplex Data Service ERB3XDRS, but RMF is not active in that system. As a result, RMF data for the specified system is not available to Control-M.
Corrective Action: Start RMF Monitor III in the relevant system.
Explanation: Control-M Workload Optimization has resumed Load-Index calculations after temporarily inactivating calculations, as indicated by previous message CTMW18E.
Corrective Action: No action is required.
Explanation: Control-M Workload Optimization tried to load Load-Index definitions, but the CTMINDX member does not exist.
Corrective Action: Use Screen W.ID to define Load-Indexes.
Explanation: Workload Policy status changed to active or inactive.
Corrective Action: No action is required.
Explanation: The Workload Policy that you tried to activate is already in Active status. The action is ignored.
Corrective Action: No action is required.
Explanation: The Workload Policy that you tried to inactivate is already in Inactive status. The action is ignored.
Corrective Action: No action is required.
Explanation: Control-M uploaded the new workload definitions from Control-M/Enterprise Manager and has started updating the workload data for the jobs. For each job that is associated with at least one workload, a CTMWL9I message is issued, followed by a set of CTMWLAI messages - one for each workload that is associated with the job. Alternatively, in response to the WLREFRESH command, this message is followed by the CTMWLBI message.
Corrective Action: No action is required.
Explanation: Control-M has completed rebuilding the workload data of the jobs; the data for nnnnn jobs were changed.
Corrective Action: No action is required.
Explanation: The available memory in the job record for the order_id job is insufficient for the new workload data. The job record is not partially updated, but instead the workload data for the job remains unchanged, as it was before.
Corrective Action: To avoid this problem in the future, increase the memory for job records by increasing the value specified for the FREESPAC parameter in the CTMPARM member.
Explanation: This message is issued in response to the WLLIST Control-M monitor operator command. It is the first message of a series, forming a resource utilization report, which consists of a list of Workload Policy names, how they limit the workload (either JOB or the name of a resource), the maximum number of permitted jobs or specific resource, the current number of jobs running or resources being utilized, and the number of jobs that are waiting due to the limitation.
This message is the first line in the header. It is always followed by CTMWLDI (the second line of the header), then CTMWLEI (a separation line), and finally CTMWL5I (utilization statistics).
Corrective Action: No action is required.
Explanation: This message is part of a series of messages, issued in response to the WLLIST Control-M monitor operator command. The messages form a resource utilization report, which consists of a list of Workload Policy names including an indication of their type (a prefix of L for Local or G for Global), how they limit the workload (either JOB or the name of a resource), the maximum number of permitted jobs or specific resource, the current number of jobs running or resources being utilized, and the number of jobs that are waiting due to the limitation.
If a Workload Policy is not currently active (based on its scheduling or due to Load-Index values), NA in displayed in the LIMIT column and statistics are not provided.
CTMWL5I messages are preceded by the CTMWL4I and CTMWLDI header messages and the CTMWLEI separation line.
Corrective Action: No action is required.
Explanation: A member containing the workload definitions has not been defined. Control-M will run without the workload facility.
Corrective Action: Determine if workload policies are required. If so, apply the workload policies. For more information, see the Workload Management topic in Chapter 1 of the Control-M for z/OS User Guide.
Explanation: The member with the workload policies contains a technical error. If there were previously defined valid workload policies, the CTMWL8W message is issued after this message. If no previously defined valid workload policies existed, the CTMWL8W message is not issued, and Control-M continues to run without the workload facility.
Corrective Action: Correct the error in the workload policies definitions.
Explanation: This message is issued only after the CTMWL7E error message. Since there is an error, the workload policy is not redefined. Instead, the previous workload policy remains active.
Corrective Action: Determine if the previous workload policy is still valid. If not, redefine the workload policy.
Explanation: This message is displayed for each job (indicated by job_name and order_id) that satisfies a workload policy. The cause that initiates the workload data change is indicated by reason, which can be one of the following:
Corrective Action: No action is required.
Explanation: The work_load_name workload is assigned to the job_name job, with order ID order_id. This message is displayed for each workload that is assigned to the job. A set of one or more of CTMWLAI messages is preceded by the CTMWL9I message.
Corrective Action: No action is required.
Explanation: This information message indicates how many Workload Policies of the specified type (Local or Global) were successfully loaded.
Corrective Action: No action is required.
Explanation: This information message notifies you that job attributes were successfully sent to the specified email recipient.
Corrective Action: No action is required.
Explanation: This message is the second line in the header of the resource utilitzation report issued in response to the WLLIST Control-M monitor operator command. It is always preceded by CTMWL4I (the first line of the header), and followed by CTMWLEI (a separation line) and then CTMWL5I (utilization statistics).
Corrective Action: No action is required.
Explanation: This message is a separation line within the resource utilitzation report issued in response to the WLLIST Control-M monitor operator command. This message is preceded by the CTMWL4I and CTMWLDI header messages, and followed by CTMWL5I messages with utilization statistics.
Corrective Action: No action is required.
Explanation: An internal error occurred. The Workload Policy member could not be accessed.
Corrective Action: Contact BMC Customer Support.
Explanation: Errors were found in the advanced scheduling parameters (that is, in a time period of Type 6) in one of the rules defined in this Workload Policy. The rule is ignored.
Corrective Action: Correct the scheduling parameters in the relevant rule.
Explanation: No definitions of Local Workload Policies were found in the member that stores these definitions (member CTMWKLDT).
Corrective Action: If you want, define Workload Policies.
Explanation: No definitions of Global Workload Policies were found in the member that stores these definitions (member CTMWKLDS).
Corrective Action: If you want, define Workload Policies.
Explanation: Problem detected in reading the member that stores definitions of Workload Policies.
Corrective Action: Contact BMC Customer Support.
Explanation: Workload Policies cannot be loaded due to a memory issue in your environment.
Corrective Action: Troubleshoot your environment for memory issues.
Parent Topic |